Changer les mails des profils

Discuss Advanced use case
,
1

Mon serveur YunoHost

Matériel: Raspberry Pi à la maison
Version de YunoHost: x.x.x
J’ai accès à mon serveur : En SSH | Par la webadmin | En direct avec un clavier/écran | …
Êtes-vous dans un contexte particulier ou avez-vous effectué des modificiations particulières sur votre instance ? : non

Log : hastebin

Résumé

yunohost

3.5.2.2 (stable)

yunohost-admin

3.5.2 (stable)

moulinette

3.5.2 (stable)

ssowat

3.5.2.1 (stable)

Description du problème

Bonjour,

Actuellement et depuis quelque temps je recois ce genre de mail :

Warning: could not send message for past 4 hours

** THIS IS A WARNING MESSAGE ONLY **
** YOU DO NOT NEED TO RESEND YOUR MESSAGE **

The original message was received at Mon, 29 Apr 2019 12:30:03 +0200
from smtp7.infomaniak.ch [83.166.132.30]

----- Transcript of session follows -----
***@ndd.fr… Deferred: Connection timed out with sub.ndd.fr.
Warning: message still undelivered after 4 hours
Will keep trying until message is 3 days old

Je pense que ca viens du fait que je n’ai pas de boite mail en sub.ndd.fr.
Est il possible de changer les mail des utilisateur de yonohost, dans leur profil ?

Merci.

2

Je me permet un petit up, car je cherches mais je trouve pas pourquoi …

3

Depuis la webadmin : Users > L’utilisateur > Edit profil > Email …

4

Je suis obligé de mettre un mail lié au domaine.
Je ne peux pas mettre d’adresse perso ?

5

C’est une adresse mail gérée par le serveur donc oui, il faut que ton domaine soit connu de YunoHost

6

Oui mais j’ai l’impression que le soucit vient de la.
Je n’ai pas d’adresse avec le nom de domaine de mon serveur.

7

Normalement elle est créée automatiquement à l’installation. Le nom de domaine des adresses email c’est celui de ton installation de Yunohost

8

Oui mais je n’utilise pas de boite avec se nom de domaine.
J’ai mit YnH dans un sous domaine.

L’idée ca serait de comprendre le message et qui envoie se message … ?

9

Si tu a installé ton Yunohost avec comme domaine toto.domaine.fr tonte les adresses email sont générées automatiquement en @toto.domaine.fr donc il faut absoluement que le DNS de ton domaine soit réglé pour gérer le mail en toto.domaine.fr

Sinon, le mail en question doit venir du système.

Si quelqu’un⋅e de l’équipe YNH peu confirmer ou infirmer… mais c’est ce que j’ai déduit de ma propre expérience et de mes propres cafouillages

10

Ok je comprend.
Mais ou est géré cette boite ?
Pourquoi avant je n’avais pas ses mails ?

11

Une partie des réponses est dans la documentation : https://yunohost.org/#/email_fr

Sinon, moi j’ai installé le webmail léger Rainloop pour consulter facilement les messages du 1er utilisateur créé.

12

Je n’avais pas fait les zones pour les mails pensant que j’en aurais pas besoin vu que je ne souhaitais pas utilisé la parti mail du serveur.
Toujours est il que je ne comprend pas pourquoi avant je n’avais pas le souci …

13

Je viens de tout activer.
L’installation de rainloop faild.
Et les mails continue de tomber :’(

Résumé

args:
app: rainloop
args: domain=nuage.ndd.fr&path=%2Frainloop&is_public=No&password=FmJbv8483&ldap=Yes&lang=Francais
force: false
label: Rainloop
no_remove_on_failure: false
ended_at: 2019-05-17 15:19:49.642555
env:
YNH_APP_ARG_DOMAIN: nuage.ndd.fr
YNH_APP_ARG_IS_PUBLIC: ‘No’
YNH_APP_ARG_LANG: Francais
YNH_APP_ARG_LDAP: ‘Yes’
YNH_APP_ARG_PASSWORD: FmJbv8483
YNH_APP_ARG_PATH: /rainloop
YNH_APP_ID: rainloop
YNH_APP_INSTANCE_NAME: rainloop
YNH_APP_INSTANCE_NUMBER: ‘1’
YNH_CWD: /var/cache/yunohost/from_file/rainloop_ynh-6f996f7d1d986462ef90227a5be51750bcccefa3/scripts
YNH_STDINFO: /tmp/tmpxkgzze/stdinfo
YNH_STDRETURN: /tmp/tmppQgwDy/stdreturn
error: ‘Une erreur inattendue est survenue : shell command return code: 1’
operation: app_install
related_to:

    • app
    • rainloop
      started_at: 2019-05-17 15:19:28.096717
      success: false

============

2019-05-17 15:19:28,112: INFO - Installation de l’application rainloop …
2019-05-17 15:19:28,334: DEBUG - Exécution de la commande ‘sh -c YNH_APP_INSTANCE_NUMBER=1 YNH_CWD=/var/cache/yunohost/from_file/rainloop_ynh-6f996f7d1d986462ef90227a5be51750bcccefa3/scripts YNH_APP_INSTANCE_NAME=rainloop YNH_STDINFO=/tmp/tmpxkgzze/stdinfo YNH_APP_ARG_PASSWORD=FmJbv8483 YNH_APP_ARG_IS_PUBLIC=No YNH_APP_ARG_LANG=Francais YNH_STDRETURN=/tmp/tmppQgwDy/stdreturn YNH_APP_ID=rainloop YNH_APP_ARG_PATH=/rainloop YNH_APP_ARG_LDAP=Yes YNH_APP_ARG_DOMAIN=nuage.ndd.fr BASH_XTRACEFD=7 /bin/bash -x “./install” nuage.ndd.fr /rainloop No FmJbv8483 Yes Francais rainloop 7>&1’ …
2019-05-17 15:19:28,334: DEBUG - About to run the command ‘[‘sh’, ‘-c’, ‘YNH_APP_INSTANCE_NUMBER=1 YNH_CWD=/var/cache/yunohost/from_file/rainloop_ynh-6f996f7d1d986462ef90227a5be51750bcccefa3/scripts YNH_APP_INSTANCE_NAME=rainloop YNH_STDINFO=/tmp/tmpxkgzze/stdinfo YNH_APP_ARG_PASSWORD=FmJbv8483 YNH_APP_ARG_IS_PUBLIC=No YNH_APP_ARG_LANG=Francais YNH_STDRETURN=/tmp/tmppQgwDy/stdreturn YNH_APP_ID=rainloop YNH_APP_ARG_PATH=/rainloop YNH_APP_ARG_LDAP=Yes YNH_APP_ARG_DOMAIN=nuage.ndd.fr BASH_XTRACEFD=7 /bin/bash -x “./install” nuage.ndd.fr /rainloop No FmJbv8483 Yes Francais rainloop 7>&1’]’
2019-05-17 15:19:28,367: DEBUG - + source .fonctions
2019-05-17 15:19:28,369: DEBUG - + TRAP_ON
2019-05-17 15:19:28,370: DEBUG - + set -eu
2019-05-17 15:19:28,371: DEBUG - + trap EXIT_PROPERLY EXIT
2019-05-17 15:19:28,373: DEBUG - + app=rainloop
2019-05-17 15:19:28,375: DEBUG - ++ cat …/sources/rainloop_version
2019-05-17 15:19:28,375: DEBUG - + rainloop_version=1.11.3
2019-05-17 15:19:28,376: DEBUG - + source /usr/share/yunohost/helpers
2019-05-17 15:19:28,376: DEBUG - +++ run-parts --list /usr/share/yunohost/helpers.d
2019-05-17 15:19:28,377: DEBUG - ++ for helper in $(run-parts --list /usr/share/yunohost/helpers.d 2>/dev/null)
2019-05-17 15:19:28,377: DEBUG - ++ ‘[’ -r /usr/share/yunohost/helpers.d/backend ‘]’
2019-05-17 15:19:28,378: DEBUG - ++ . /usr/share/yunohost/helpers.d/backend
2019-05-17 15:19:28,479: DEBUG - ++ for helper in $(run-parts --list /usr/share/yunohost/helpers.d 2>/dev/null)
2019-05-17 15:19:28,480: DEBUG - ++ ‘[’ -r /usr/share/yunohost/helpers.d/debug ‘]’
2019-05-17 15:19:28,481: DEBUG - ++ . /usr/share/yunohost/helpers.d/debug
2019-05-17 15:19:28,482: DEBUG - ++ for helper in $(run-parts --list /usr/share/yunohost/helpers.d 2>/dev/null)
2019-05-17 15:19:28,483: DEBUG - ++ ‘[’ -r /usr/share/yunohost/helpers.d/filesystem ‘]’
2019-05-17 15:19:28,483: DEBUG - ++ . /usr/share/yunohost/helpers.d/filesystem
2019-05-17 15:19:28,484: DEBUG - +++ source /usr/share/yunohost/helpers.d/getopts
2019-05-17 15:19:28,485: DEBUG - +++ CAN_BIND=1
2019-05-17 15:19:28,486: DEBUG - ++ for helper in $(run-parts --list /usr/share/yunohost/helpers.d 2>/dev/null)
2019-05-17 15:19:28,486: DEBUG - ++ ‘[’ -r /usr/share/yunohost/helpers.d/getopts ‘]’
2019-05-17 15:19:28,487: DEBUG - ++ . /usr/share/yunohost/helpers.d/getopts
2019-05-17 15:19:28,488: DEBUG - ++ for helper in $(run-parts --list /usr/share/yunohost/helpers.d 2>/dev/null)
2019-05-17 15:19:28,488: DEBUG - ++ ‘[’ -r /usr/share/yunohost/helpers.d/ip ‘]’
2019-05-17 15:19:28,489: DEBUG - ++ . /usr/share/yunohost/helpers.d/ip
2019-05-17 15:19:28,489: DEBUG - ++ for helper in $(run-parts --list /usr/share/yunohost/helpers.d 2>/dev/null)
2019-05-17 15:19:28,490: DEBUG - ++ ‘[’ -r /usr/share/yunohost/helpers.d/mysql ‘]’
2019-05-17 15:19:28,490: DEBUG - ++ . /usr/share/yunohost/helpers.d/mysql
2019-05-17 15:19:28,491: DEBUG - +++ MYSQL_ROOT_PWD_FILE=/etc/yunohost/mysql
2019-05-17 15:19:28,491: DEBUG - ++ for helper in $(run-parts --list /usr/share/yunohost/helpers.d 2>/dev/null)
2019-05-17 15:19:28,492: DEBUG - ++ ‘[’ -r /usr/share/yunohost/helpers.d/network ‘]’
2019-05-17 15:19:28,493: DEBUG - ++ . /usr/share/yunohost/helpers.d/network
2019-05-17 15:19:28,493: DEBUG - ++ for helper in $(run-parts --list /usr/share/yunohost/helpers.d 2>/dev/null)
2019-05-17 15:19:28,494: DEBUG - ++ ‘[’ -r /usr/share/yunohost/helpers.d/nodejs ‘]’
2019-05-17 15:19:28,494: DEBUG - ++ . /usr/share/yunohost/helpers.d/nodejs
2019-05-17 15:19:28,495: DEBUG - +++ n_install_dir=/opt/node_n
2019-05-17 15:19:28,496: DEBUG - +++ node_version_path=/opt/node_n/n/versions/node
2019-05-17 15:19:28,496: DEBUG - +++ export N_PREFIX=/opt/node_n
2019-05-17 15:19:28,497: DEBUG - +++ N_PREFIX=/opt/node_n
2019-05-17 15:19:28,497: DEBUG - ++ for helper in $(run-parts --list /usr/share/yunohost/helpers.d 2>/dev/null)
2019-05-17 15:19:28,498: DEBUG - ++ ‘[’ -r /usr/share/yunohost/helpers.d/package ‘]’
2019-05-17 15:19:28,498: DEBUG - ++ . /usr/share/yunohost/helpers.d/package
2019-05-17 15:19:28,499: DEBUG - ++ for helper in $(run-parts --list /usr/share/yunohost/helpers.d 2>/dev/null)
2019-05-17 15:19:28,499: DEBUG - ++ ‘[’ -r /usr/share/yunohost/helpers.d/print ‘]’
2019-05-17 15:19:28,500: DEBUG - ++ . /usr/share/yunohost/helpers.d/print
2019-05-17 15:19:28,500: DEBUG - +++ increment_progression=0
2019-05-17 15:19:28,501: DEBUG - +++ previous_weight=0
2019-05-17 15:19:28,501: DEBUG - ++++ date +%s
2019-05-17 15:19:28,502: DEBUG - +++ base_time=1558106368
2019-05-17 15:19:28,503: DEBUG - ++ for helper in $(run-parts --list /usr/share/yunohost/helpers.d 2>/dev/null)
2019-05-17 15:19:28,503: DEBUG - ++ ‘[’ -r /usr/share/yunohost/helpers.d/psql ‘]’
2019-05-17 15:19:28,504: DEBUG - ++ . /usr/share/yunohost/helpers.d/psql
2019-05-17 15:19:28,504: DEBUG - +++ PSQL_ROOT_PWD_FILE=/etc/yunohost/psql
2019-05-17 15:19:28,506: DEBUG - ++ for helper in $(run-parts --list /usr/share/yunohost/helpers.d 2>/dev/null)
2019-05-17 15:19:28,509: DEBUG - ++ ‘[’ -r /usr/share/yunohost/helpers.d/setting ‘]’
2019-05-17 15:19:28,509: DEBUG - ++ . /usr/share/yunohost/helpers.d/setting
2019-05-17 15:19:28,510: DEBUG - ++ for helper in $(run-parts --list /usr/share/yunohost/helpers.d 2>/dev/null)
2019-05-17 15:19:28,511: DEBUG - ++ ‘[’ -r /usr/share/yunohost/helpers.d/string ‘]’
2019-05-17 15:19:28,511: DEBUG - ++ . /usr/share/yunohost/helpers.d/string
2019-05-17 15:19:28,512: DEBUG - ++ for helper in $(run-parts --list /usr/share/yunohost/helpers.d 2>/dev/null)
2019-05-17 15:19:28,513: DEBUG - ++ ‘[’ -r /usr/share/yunohost/helpers.d/system ‘]’
2019-05-17 15:19:28,513: DEBUG - ++ . /usr/share/yunohost/helpers.d/system
2019-05-17 15:19:28,514: DEBUG - ++ for helper in $(run-parts --list /usr/share/yunohost/helpers.d 2>/dev/null)
2019-05-17 15:19:28,515: DEBUG - ++ ‘[’ -r /usr/share/yunohost/helpers.d/user ‘]’
2019-05-17 15:19:28,515: DEBUG - ++ . /usr/share/yunohost/helpers.d/user
2019-05-17 15:19:28,516: DEBUG - ++ for helper in $(run-parts --list /usr/share/yunohost/helpers.d 2>/dev/null)
2019-05-17 15:19:28,517: DEBUG - ++ ‘[’ -r /usr/share/yunohost/helpers.d/utils ‘]’
2019-05-17 15:19:28,518: DEBUG - ++ . /usr/share/yunohost/helpers.d/utils
2019-05-17 15:19:28,519: DEBUG - + domain=nuage.ndd.fr
2019-05-17 15:19:28,520: DEBUG - + path=/rainloop
2019-05-17 15:19:28,521: DEBUG - + is_public=No
2019-05-17 15:19:28,522: DEBUG - + password=FmJbv8483
2019-05-17 15:19:28,523: DEBUG - + ldap=Yes
2019-05-17 15:19:28,524: DEBUG - + lang=Francais
2019-05-17 15:19:28,525: DEBUG - + CHECK_PATH
2019-05-17 15:19:28,525: DEBUG - + ‘[’ / ‘!=’ / ‘]’
2019-05-17 15:19:28,526: DEBUG - + ‘[’ p == / ‘]’
2019-05-17 15:19:28,526: DEBUG - + CHECK_DOMAINPATH
2019-05-17 15:19:28,527: DEBUG - + sudo yunohost app checkurl nuage.ndd.fr/rainloop -a rainloop
2019-05-17 15:19:29,530: WARNING - ‘yunohost app checkurl’ is deprecated and will be removed in the future
2019-05-17 15:19:29,733: WARNING - Packagers /!\ : ‘app checkurl’ is deprecated ! Please use the helper ‘ynh_webpath_register’ instead !
2019-05-17 15:19:29,935: DEBUG - + dbuser=rainloop
2019-05-17 15:19:29,935: DEBUG - + dbname=rainloop
2019-05-17 15:19:29,936: DEBUG - ++ ynh_string_random
2019-05-17 15:19:29,937: DEBUG - ++ local legacy_args=l
2019-05-17 15:19:29,938: DEBUG - ++ args_array=([l]=length=)
2019-05-17 15:19:29,938: DEBUG - ++ declare -Ar args_array
2019-05-17 15:19:29,939: DEBUG - ++ local length
2019-05-17 15:19:29,940: DEBUG - ++ ynh_handle_getopts_args
2019-05-17 15:19:29,940: DEBUG - ++ set +x
2019-05-17 15:19:29,941: DEBUG - ++ length=24
2019-05-17 15:19:29,942: DEBUG - ++ dd if=/dev/urandom bs=1 count=1000
2019-05-17 15:19:29,943: DEBUG - ++ tr -c -d A-Za-z0-9
2019-05-17 15:19:29,944: DEBUG - ++ sed -n ‘s/(.{24})./\1/p’
2019-05-17 15:19:29,944: DEBUG - + dbpass=39QXTzNYUiXAmYmZYzRw3TUz
2019-05-17 15:19:29,945: DEBUG - + ynh_mysql_create_db rainloop rainloop 39QXTzNYUiXAmYmZYzRw3TUz
2019-05-17 15:19:29,946: DEBUG - + local db=rainloop
2019-05-17 15:19:29,946: DEBUG - + local ‘sql=CREATE DATABASE rainloop;’
2019-05-17 15:19:29,947: DEBUG - + [[ 3 -gt 1 ]]
2019-05-17 15:19:29,948: DEBUG - + sql+=’ GRANT ALL PRIVILEGES ON rainloop. TO ‘’‘rainloop’’’@’’‘localhost’’’’
2019-05-17 15:19:29,949: DEBUG - + [[ -n 39QXTzNYUiXAmYmZYzRw3TUz ]]
2019-05-17 15:19:29,950: DEBUG - + sql+=’ IDENTIFIED BY ‘’‘39QXTzNYUiXAmYmZYzRw3TUz’’’’
2019-05-17 15:19:29,950: DEBUG - + sql+=’ WITH GRANT OPTION;’
2019-05-17 15:19:29,951: DEBUG - + ynh_mysql_execute_as_root ‘–sql=CREATE DATABASE rainloop; GRANT ALL PRIVILEGES ON rainloop.* TO ‘’‘rainloop’’’@’’‘localhost’’’ IDENTIFIED BY ‘’‘39QXTzNYUiXAmYmZYzRw3TUz’’’ WITH GRANT OPTION;’
2019-05-17 15:19:29,951: DEBUG - + local legacy_args=sd
2019-05-17 15:19:29,953: DEBUG - + args_array=([s]=sql= [d]=database=)
2019-05-17 15:19:29,953: DEBUG - + declare -Ar args_array
2019-05-17 15:19:29,954: DEBUG - + local sql
2019-05-17 15:19:29,955: DEBUG - + local database
2019-05-17 15:19:29,955: DEBUG - + ynh_handle_getopts_args ‘–sql=CREATE DATABASE rainloop; GRANT ALL PRIVILEGES ON rainloop.* TO ‘’‘rainloop’’’@’’‘localhost’’’ IDENTIFIED BY ‘’‘39QXTzNYUiXAmYmZYzRw3TUz’’’ WITH GRANT OPTION;’
2019-05-17 15:19:29,956: DEBUG - + set +x
2019-05-17 15:19:29,957: DEBUG - + database=
2019-05-17 15:19:29,957: DEBUG - ++ sudo cat /etc/yunohost/mysql
2019-05-17 15:19:30,058: DEBUG - + ynh_mysql_connect_as --user=root --password=ZI0l4EhJiA --database=
2019-05-17 15:19:30,059: DEBUG - + local legacy_args=upd
2019-05-17 15:19:30,059: DEBUG - + args_array=([u]=user= [p]=password= [d]=database=)
2019-05-17 15:19:30,060: DEBUG - + declare -Ar args_array
2019-05-17 15:19:30,061: DEBUG - + local user
2019-05-17 15:19:30,061: DEBUG - + local password
2019-05-17 15:19:30,062: DEBUG - + local database
2019-05-17 15:19:30,062: DEBUG - + ynh_handle_getopts_args --user=root --password=ZI0l4EhJiA --database=
2019-05-17 15:19:30,063: DEBUG - + set +x
2019-05-17 15:19:30,063: DEBUG - + database=
2019-05-17 15:19:30,064: DEBUG - + mysql -u root --password=ZI0l4EhJiA -B ‘’
2019-05-17 15:19:30,265: DEBUG - + ynh_app_setting_set rainloop mysqlpwd 39QXTzNYUiXAmYmZYzRw3TUz
2019-05-17 15:19:30,266: DEBUG - + local legacy_args=akv
2019-05-17 15:19:30,266: DEBUG - + args_array=([a]=app= [k]=key= [v]=value=)
2019-05-17 15:19:30,267: DEBUG - + declare -Ar args_array
2019-05-17 15:19:30,268: DEBUG - + local app
2019-05-17 15:19:30,268: DEBUG - + local key
2019-05-17 15:19:30,269: DEBUG - + local value
2019-05-17 15:19:30,270: DEBUG - + ynh_handle_getopts_args rainloop mysqlpwd 39QXTzNYUiXAmYmZYzRw3TUz
2019-05-17 15:19:30,270: DEBUG - + set +x
2019-05-17 15:19:30,271: DEBUG - + echo ‘! Helper used in legacy mode !’
2019-05-17 15:19:30,272: DEBUG - + set +x
2019-05-17 15:19:30,273: DEBUG - + ynh_app_setting set rainloop mysqlpwd 39QXTzNYUiXAmYmZYzRw3TUz
2019-05-17 15:19:30,273: DEBUG - + ACTION=set
2019-05-17 15:19:30,274: DEBUG - + APP=rainloop
2019-05-17 15:19:30,274: DEBUG - + KEY=mysqlpwd
2019-05-17 15:19:30,275: DEBUG - + VALUE=39QXTzNYUiXAmYmZYzRw3TUz
2019-05-17 15:19:30,276: DEBUG - + python -
2019-05-17 15:19:30,678: DEBUG - + CHECK_FINALPATH
2019-05-17 15:19:30,679: DEBUG - + final_path=/var/www/rainloop
2019-05-17 15:19:30,687: DEBUG - + ‘[’ -e /var/www/rainloop ‘]’
2019-05-17 15:19:30,688: DEBUG - + final_path=/var/www/rainloop
2019-05-17 15:19:30,689: DEBUG - + rainloop_path=/var/www/rainloop/app
2019-05-17 15:19:30,691: DEBUG - + sudo rm -rf /var/www/rainloop
2019-05-17 15:19:30,793: DEBUG - + sudo mkdir -p /var/www/rainloop
2019-05-17 15:19:30,894: DEBUG - + sudo mkdir -p /var/www/rainloop/app
2019-05-17 15:19:30,895: DEBUG - + sudo wget -q https://github.com/RainLoop/rainloop-webmail/releases/download/v1.11.3/rainloop-community-1.11.3.zip
2019-05-17 15:19:34,107: DEBUG - + sudo wget -q https://github.com/RainLoop/rainloop-webmail/releases/download/v1.11.3/rainloop-community-1.11.3.zip.asc
2019-05-17 15:19:35,011: DEBUG - + sudo wget -q https://repository.rainloop.net/RainLoop.asc
2019-05-17 15:19:35,414: DEBUG - + sudo gpg --import --quiet RainLoop.asc
2019-05-17 15:19:35,515: WARNING - gpg: starting migration from earlier GnuPG versions
2019-05-17 15:19:36,519: DEBUG - + sudo gpg --verify --quiet rainloop-community-1.11.3.zip.asc rainloop-community-1.11.3.zip
2019-05-17 15:19:36,520: WARNING - gpg: porting secret keys from ‘/root/.gnupg/secring.gpg’ to gpg-agent
2019-05-17 15:19:36,522: WARNING - gpg: migration succeeded
2019-05-17 15:19:36,825: DEBUG - + sudo gpg --batch --delete-key --yes Rainloop
2019-05-17 15:19:36,826: WARNING - gpg: Signature made Mon 25 Sep 2017 18:17:11 UTC
2019-05-17 15:19:36,827: WARNING - gpg: using RSA key ED7C49D987DA4591
2019-05-17 15:19:36,827: WARNING - gpg: Good signature from “RainLoop support@rainloop.net” [unknown]
2019-05-17 15:19:36,828: WARNING - gpg: WARNING: This key is not certified with a trusted signature!
2019-05-17 15:19:36,829: WARNING - gpg: There is no indication that the signature belongs to the owner.
2019-05-17 15:19:36,830: WARNING - Primary key fingerprint: 3B79 7ECE 694F 3B7B 70F3 11A4 ED7C 49D9 87DA 4591
2019-05-17 15:19:36,931: DEBUG - + sudo unzip -qq rainloop-community-1.11.3.zip -d /var/www/rainloop/app/
2019-05-17 15:19:37,735: DEBUG - + sudo mkdir -p /var/www/rainloop/app/data/data/default/plugins
2019-05-17 15:19:37,736: DEBUG - + sudo cp -rf …/sources/plugins/auto-domain-grab /var/www/rainloop/app/data/data/default/plugins/.
2019-05-17 15:19:37,837: DEBUG - + sudo cp -rf …/sources/plugins/ynh-login-mapping /var/www/rainloop/app/data/data/default/plugins/.
2019-05-17 15:19:37,938: DEBUG - + sudo cp -rf …/sources/plugins/ynh-ldap-suggestions /var/www/rainloop/app/data/data/default/plugins/.
2019-05-17 15:19:37,939: DEBUG - + sudo mkdir -p /var/www/rainloop/app/data/data/default/configs/
2019-05-17 15:19:38,040: DEBUG - + application_file=/var/www/rainloop/app/data/data/default/configs/application.ini
2019-05-17 15:19:38,041: DEBUG - + case “$lang” in
2019-05-17 15:19:38,041: DEBUG - + lang=fr
2019-05-17 15:19:38,042: DEBUG - + ynh_app_setting_set rainloop lang fr
2019-05-17 15:19:38,043: DEBUG - + local legacy_args=akv
2019-05-17 15:19:38,044: DEBUG - + args_array=([a]=app= [k]=key= [v]=value=)
2019-05-17 15:19:38,044: DEBUG - + declare -Ar args_array
2019-05-17 15:19:38,045: DEBUG - + local app
2019-05-17 15:19:38,045: DEBUG - + local key
2019-05-17 15:19:38,046: DEBUG - + local value
2019-05-17 15:19:38,047: DEBUG - + ynh_handle_getopts_args rainloop lang fr
2019-05-17 15:19:38,047: DEBUG - + set +x
2019-05-17 15:19:38,048: DEBUG - + echo ‘! Helper used in legacy mode !’
2019-05-17 15:19:38,049: DEBUG - + set +x
2019-05-17 15:19:38,049: DEBUG - + ynh_app_setting set rainloop lang fr
2019-05-17 15:19:38,050: DEBUG - + ACTION=set
2019-05-17 15:19:38,050: DEBUG - + APP=rainloop
2019-05-17 15:19:38,051: DEBUG - + KEY=lang
2019-05-17 15:19:38,051: DEBUG - + VALUE=fr
2019-05-17 15:19:38,052: DEBUG - + python -
2019-05-17 15:19:38,454: DEBUG - + plugins=ynh-login-mapping,auto-domain-grab
2019-05-17 15:19:38,455: DEBUG - + ‘[’ Yes = Yes ‘]’
2019-05-17 15:19:38,455: DEBUG - + plugins=ynh-login-mapping,auto-domain-grab,ynh-ldap-suggestions
2019-05-17 15:19:38,456: DEBUG - + ynh_app_setting_set rainloop ldap Yes
2019-05-17 15:19:38,456: DEBUG - + local legacy_args=akv
2019-05-17 15:19:38,457: DEBUG - + args_array=([a]=app= [k]=key= [v]=value=)
2019-05-17 15:19:38,457: DEBUG - + declare -Ar args_array
2019-05-17 15:19:38,458: DEBUG - + local app
2019-05-17 15:19:38,458: DEBUG - + local key
2019-05-17 15:19:38,458: DEBUG - + local value
2019-05-17 15:19:38,459: DEBUG - + ynh_handle_getopts_args rainloop ldap Yes
2019-05-17 15:19:38,459: DEBUG - + set +x
2019-05-17 15:19:38,460: DEBUG - + echo ‘! Helper used in legacy mode !’
2019-05-17 15:19:38,460: DEBUG - + set +x
2019-05-17 15:19:38,461: DEBUG - + ynh_app_setting set rainloop ldap Yes
2019-05-17 15:19:38,461: DEBUG - + ACTION=set
2019-05-17 15:19:38,462: DEBUG - + APP=rainloop
2019-05-17 15:19:38,462: DEBUG - + KEY=ldap
2019-05-17 15:19:38,463: DEBUG - + VALUE=Yes
2019-05-17 15:19:38,463: DEBUG - + python -
2019-05-17 15:19:38,865: DEBUG - + ynh_app_setting_set rainloop plugins ynh-login-mapping,auto-domain-grab,ynh-ldap-suggestions
2019-05-17 15:19:38,866: DEBUG - + local legacy_args=akv
2019-05-17 15:19:38,867: DEBUG - + args_array=([a]=app= [k]=key= [v]=value=)
2019-05-17 15:19:38,867: DEBUG - + declare -Ar args_array
2019-05-17 15:19:38,867: DEBUG - + local app
2019-05-17 15:19:38,868: DEBUG - + local key
2019-05-17 15:19:38,868: DEBUG - + local value
2019-05-17 15:19:38,869: DEBUG - + ynh_handle_getopts_args rainloop plugins ynh-login-mapping,auto-domain-grab,ynh-ldap-suggestions
2019-05-17 15:19:38,869: DEBUG - + set +x
2019-05-17 15:19:38,870: DEBUG - + echo ‘! Helper used in legacy mode !’
2019-05-17 15:19:38,870: DEBUG - + set +x
2019-05-17 15:19:38,871: DEBUG - + ynh_app_setting set rainloop plugins ynh-login-mapping,auto-domain-grab,ynh-ldap-suggestions
2019-05-17 15:19:38,871: DEBUG - + ACTION=set
2019-05-17 15:19:38,872: DEBUG - + APP=rainloop
2019-05-17 15:19:38,872: DEBUG - + KEY=plugins
2019-05-17 15:19:38,873: DEBUG - + VALUE=ynh-login-mapping,auto-domain-grab,ynh-ldap-suggestions
2019-05-17 15:19:38,873: DEBUG - + python -
2019-05-17 15:19:39,376: DEBUG - + sudo cp …/conf/data/configs/application.ini /var/www/rainloop/app/data/data/default/configs/application.ini
2019-05-17 15:19:39,376: DEBUG - + sudo sed -i s@domain.tld@nuage.ndd.fr@g /var/www/rainloop/app/data/data/default/configs/application.ini
2019-05-17 15:19:39,477: DEBUG - + sudo sed -i s@MYSQLUSER@rainloop@g /var/www/rainloop/app/data/data/default/configs/application.ini
2019-05-17 15:19:39,579: DEBUG - + sudo sed -i s@MYSQLPASSWORD@39QXTzNYUiXAmYmZYzRw3TUz@g /var/www/rainloop/app/data/data/default/configs/application.ini
2019-05-17 15:19:39,680: DEBUG - + sudo sed -i s@LANGTOCHANGE@fr@g /var/www/rainloop/app/data/data/default/configs/application.ini
2019-05-17 15:19:39,681: DEBUG - + sudo sed -i s@PLUGINSTOENABLE@ynh-login-mapping,auto-domain-grab,ynh-ldap-suggestions@g /var/www/rainloop/app/data/data/default/configs/application.ini
2019-05-17 15:19:39,782: DEBUG - + sudo php …/conf/config.php --index=/var/www/rainloop/app/index.php --password=FmJbv8483
2019-05-17 15:19:40,084: DEBUG - Admin password updated+ ynh_app_setting_set rainloop password FmJbv8483
2019-05-17 15:19:40,085: DEBUG - + local legacy_args=akv
2019-05-17 15:19:40,086: DEBUG - + args_array=([a]=app= [k]=key= [v]=value=)
2019-05-17 15:19:40,087: DEBUG - + declare -Ar args_array
2019-05-17 15:19:40,088: DEBUG - + local app
2019-05-17 15:19:40,088: DEBUG - + local key
2019-05-17 15:19:40,089: DEBUG - + local value
2019-05-17 15:19:40,090: DEBUG - + ynh_handle_getopts_args rainloop password FmJbv8483
2019-05-17 15:19:40,090: DEBUG - + set +x
2019-05-17 15:19:40,091: DEBUG - + echo ‘! Helper used in legacy mode !’
2019-05-17 15:19:40,091: DEBUG - + set +x
2019-05-17 15:19:40,092: DEBUG - + ynh_app_setting set rainloop password FmJbv8483
2019-05-17 15:19:40,093: DEBUG - + ACTION=set
2019-05-17 15:19:40,094: DEBUG - + APP=rainloop
2019-05-17 15:19:40,094: DEBUG - + KEY=password
2019-05-17 15:19:40,095: DEBUG - + VALUE=FmJbv8483
2019-05-17 15:19:40,096: DEBUG - + python -
2019-05-17 15:19:40,497: DEBUG - + sudo mkdir -p /var/www/rainloop/app/data/data/default/domains/
2019-05-17 15:19:40,599: DEBUG - ++ ldapsearch -LLL -x -b ou=domains,dc=yunohost,dc=org -s one objectclass=top virtualdomain
2019-05-17 15:19:40,599: DEBUG - ++ grep -v dn:
2019-05-17 15:19:40,600: DEBUG - ++ sed s/virtualdomain://
2019-05-17 15:19:40,600: DEBUG - + alldomains=’ nuage.ndd.fr’
2019-05-17 15:19:40,601: DEBUG - + for ldomain in $alldomains
2019-05-17 15:19:40,601: DEBUG - + sudo cp …/conf/data/domains/domain.tld.ini /var/www/rainloop/app/data/data/default/domains/nuage.ndd.fr.ini
2019-05-17 15:19:40,703: DEBUG - + sudo cp …/conf/data/domains/default.ini /var/www/rainloop/app/data/data/default/domains/default.ini
2019-05-17 15:19:40,804: DEBUG - + sudo cp …/sources/sso/sso.php /var/www/rainloop/index.php
2019-05-17 15:19:40,905: DEBUG - + sudo sed -i s@domain.tld@nuage.ndd.fr@g /var/www/rainloop/index.php
2019-05-17 15:19:40,906: DEBUG - + sudo sed -i s@ALIASTOCHANGE@/var/www/rainloop@g /var/www/rainloop/index.php
2019-05-17 15:19:41,007: DEBUG - + ‘[’ /rainloop = / ‘]’
2019-05-17 15:19:41,008: DEBUG - + sudo sed -i s@ROOTTOCHANGE@/rainloop@g /var/www/rainloop/index.php
2019-05-17 15:19:41,110: DEBUG - + sudo cp -rf …/sources/pgpback /var/www/rainloop/.
2019-05-17 15:19:41,211: DEBUG - + sudo find /var/www/rainloop/. -type d -exec chmod 755 ‘{}’ ‘;’
2019-05-17 15:19:42,216: DEBUG - + sudo find /var/www/rainloop/. -type f -exec chmod 644 ‘{}’ ‘;’
2019-05-17 15:19:47,538: DEBUG - + sudo chown -R www-data:www-data /var/www/rainloop
2019-05-17 15:19:47,640: DEBUG - + nginx_conf_file=/etc/nginx/conf.d/nuage.ndd.fr.d/rainloop.conf
2019-05-17 15:19:47,641: DEBUG - + sudo cp …/conf/nginx.conf /etc/nginx/conf.d/nuage.ndd.fr.d/rainloop.conf
2019-05-17 15:19:47,742: DEBUG - + ‘[’ /rainloop = / ‘]’
2019-05-17 15:19:47,743: DEBUG - + sudo sed -i s@ROOTTOCHANGE@/rainloop@g /etc/nginx/conf.d/nuage.ndd.fr.d/rainloop.conf
2019-05-17 15:19:47,845: DEBUG - + sudo sed -i s@PATHTOCHANGE@/rainloop@g /etc/nginx/conf.d/nuage.ndd.fr.d/rainloop.conf
2019-05-17 15:19:47,946: DEBUG - + sudo sed -i s@ALIASTOCHANGE@/var/www/rainloop/@g /etc/nginx/conf.d/nuage.ndd.fr.d/rainloop.conf
2019-05-17 15:19:47,947: DEBUG - + sudo sed -i s@NAMETOCHANGE@rainloop@g /etc/nginx/conf.d/nuage.ndd.fr.d/rainloop.conf
2019-05-17 15:19:48,048: DEBUG - + sudo chown root: /etc/nginx/conf.d/nuage.ndd.fr.d/rainloop.conf
2019-05-17 15:19:48,149: DEBUG - + sudo chmod 644 /etc/nginx/conf.d/nuage.ndd.fr.d/rainloop.conf
2019-05-17 15:19:48,150: DEBUG - + finalphpconf=/etc/php/7.0/fpm/pool.d/rainloop.conf
2019-05-17 15:19:48,150: DEBUG - + sudo cp …/conf/php-fpm.conf /etc/php/7.0/fpm/pool.d/rainloop.conf
2019-05-17 15:19:48,252: DEBUG - + sudo sed -i s@NAMETOCHANGE@rainloop@g /etc/php/7.0/fpm/pool.d/rainloop.conf
2019-05-17 15:19:48,453: DEBUG - + sudo chown root: /etc/php/7.0/fpm/pool.d/rainloop.conf
2019-05-17 15:19:48,454: DEBUG - + sudo chmod 644 /etc/php/7.0/fpm/pool.d/rainloop.conf
2019-05-17 15:19:48,555: DEBUG - + ynh_app_setting_set rainloop is_public No
2019-05-17 15:19:48,556: DEBUG - + local legacy_args=akv
2019-05-17 15:19:48,556: DEBUG - + args_array=([a]=app= [k]=key= [v]=value=)
2019-05-17 15:19:48,557: DEBUG - + declare -Ar args_array
2019-05-17 15:19:48,558: DEBUG - + local app
2019-05-17 15:19:48,558: DEBUG - + local key
2019-05-17 15:19:48,559: DEBUG - + local value
2019-05-17 15:19:48,560: DEBUG - + ynh_handle_getopts_args rainloop is_public No
2019-05-17 15:19:48,560: DEBUG - + set +x
2019-05-17 15:19:48,561: DEBUG - + echo ‘! Helper used in legacy mode !’
2019-05-17 15:19:48,562: DEBUG - + set +x
2019-05-17 15:19:48,562: DEBUG - + ynh_app_setting set rainloop is_public No
2019-05-17 15:19:48,563: DEBUG - + ACTION=set
2019-05-17 15:19:48,564: DEBUG - + APP=rainloop
2019-05-17 15:19:48,564: DEBUG - + KEY=is_public
2019-05-17 15:19:48,565: DEBUG - + VALUE=No
2019-05-17 15:19:48,565: DEBUG - + python -
2019-05-17 15:19:48,967: DEBUG - + ‘[’ No = Yes ‘]’
2019-05-17 15:19:48,968: DEBUG - + sudo service php7.0-fpm reload
2019-05-17 15:19:49,170: DEBUG - + sudo service nginx reload
2019-05-17 15:19:49,371: DEBUG - + EXIT_PROPERLY
2019-05-17 15:19:49,373: WARNING - Job for nginx.service failed because the control process exited with error code.
2019-05-17 15:19:49,373: DEBUG - + exit_code=1
2019-05-17 15:19:49,374: WARNING - See “systemctl status nginx.service” and “journalctl -xe” for details.
2019-05-17 15:19:49,374: DEBUG - + ‘[’ 1 -eq 0 ‘]’
2019-05-17 15:19:49,375: WARNING - !!
2019-05-17 15:19:49,376: DEBUG - + trap ‘’ EXIT
2019-05-17 15:19:49,376: WARNING - rainloop install’s script has encountered an error. Installation was cancelled.
2019-05-17 15:19:49,377: DEBUG - + set +eu
2019-05-17 15:19:49,377: WARNING - !!
2019-05-17 15:19:49,378: DEBUG - + echo -e ‘\e[91m \e[1m’
2019-05-17 15:19:49,378: DEBUG - e[91m e[1m
2019-05-17 15:19:49,379: DEBUG - + echo -e ‘!!\n rainloop install’’‘s script has encountered an error. Installation was cancelled.\n!!’
2019-05-17 15:19:49,379: DEBUG - + type -t CLEAN_SETUP
2019-05-17 15:19:49,380: DEBUG - + sudo sed -i ‘@“nuage.ndd.fr/rainloop/”:@d’ /etc/ssowat/conf.json
2019-05-17 15:19:49,480: DEBUG - + ynh_die
2019-05-17 15:19:49,481: WARNING -
2019-05-17 15:19:49,482: DEBUG - + local legacy_args=mc
2019-05-17 15:19:49,483: DEBUG - + args_array=([m]=message= [c]=ret_code=)
2019-05-17 15:19:49,483: DEBUG - + declare -Ar args_array
2019-05-17 15:19:49,484: DEBUG - + local message
2019-05-17 15:19:49,484: DEBUG - + local ret_code
2019-05-17 15:19:49,485: DEBUG - + ynh_handle_getopts_args
2019-05-17 15:19:49,485: DEBUG - + set +x
2019-05-17 15:19:49,486: DEBUG - + echo ‘’
2019-05-17 15:19:49,486: DEBUG - + exit 1

14

Tu es sur un VPS ?

15

Non, RPI.

16

Là je peux pas vraiment t’aider. Mais j’ai eu des pb d’installation de plusieurs application PHP avec Yunohost et c’était toujours un pb de dépendances PHP (pb de conf sur mon VPS). Regarde de ce côté peut-être

17

Pour avoir la liste des modules PHP installés

ls -l /etc/php/7.0/mods-available/

Tu dois obtenir un truc dans le genre

-rw-r--r-- 1 root root 74 Mar  8 11:01 calendar.ini
-rw-r--r-- 1 root root 71 Mar  8 11:01 ctype.ini
-rw-r--r-- 1 root root 68 Mar  8 11:01 curl.ini
-rw-r--r-- 1 root root 66 Mar  8 11:01 dom.ini
-rw-r--r-- 1 root root 70 Mar  8 11:01 exif.ini
-rw-r--r-- 1 root root 74 Mar  8 11:01 fileinfo.ini
-rw-r--r-- 1 root root 69 Mar  8 11:01 ftp.ini
-rw-r--r-- 1 root root 64 Mar  8 11:01 gd.ini
-rw-r--r-- 1 root root 73 Mar  8 11:01 gettext.ini
-rw-r--r-- 1 root root 71 Mar  8 11:01 iconv.ini
-rw-r--r-- 1 root root 68 Mar  8 11:01 intl.ini
-rw-r--r-- 1 root root 68 Mar  8 11:01 json.ini
-rw-r--r-- 1 root root 68 Mar  8 11:01 ldap.ini
-rw-r--r-- 1 root root 76 Mar  8 11:01 mbstring.ini
-rw-r--r-- 1 root root 72 Mar  8 11:01 mcrypt.ini
-rw-r--r-- 1 root root 71 Mar  8 11:01 mysqli.ini
-rw-r--r-- 1 root root 72 Mar  8 11:01 mysqlnd.ini
-rw-r--r-- 1 root root 79 Mar  8 11:01 opcache.ini
-rw-r--r-- 1 root root 69 Mar  8 11:01 pdo.ini
-rw-r--r-- 1 root root 74 Mar  8 11:01 pdo_mysql.ini
-rw-r--r-- 1 root root 70 Mar  8 11:01 phar.ini
-rw-r--r-- 1 root root 71 Mar  8 11:01 posix.ini
-rw-r--r-- 1 root root 76 Mar  8 11:01 readline.ini
-rw-r--r-- 1 root root 71 Mar  8 11:01 shmop.ini
-rw-r--r-- 1 root root 72 Mar  8 11:01 simplexml.ini
-rw-r--r-- 1 root root 73 Mar  8 11:01 sockets.ini
-rw-r--r-- 1 root root 73 Mar  8 11:01 sysvmsg.ini
-rw-r--r-- 1 root root 73 Mar  8 11:01 sysvsem.ini
-rw-r--r-- 1 root root 73 Mar  8 11:01 sysvshm.ini
-rw-r--r-- 1 root root 75 Mar  8 11:01 tokenizer.ini
-rw-r--r-- 1 root root 67 Mar  8 11:01 wddx.ini
-rw-r--r-- 1 root root 66 Mar  8 11:01 xml.ini
-rw-r--r-- 1 root root 72 Mar  8 11:01 xmlreader.ini
-rw-r--r-- 1 root root 72 Mar  8 11:01 xmlwriter.ini
-rw-r--r-- 1 root root 66 Mar  8 11:01 xsl.ini
18

Je vais regarder, c’est très gentil à toi de m’aider.
C’est sure qu’une personne étant plus dans le dev serait peut être à même de répondre …

J’en viens à me dire que je vais sortir et trouvé une alternative, car ça fait plusieurs semaines que ça spam la boite et personne a par toi ne m’aide …

Mais qu’elle serait le rapport avec les mail et php ?

19

@hercut sans avoir exactement ce message d’erreur, j’en ai d’autres du mme type pour une raison similaire : craignant la qualité de mon auto-hébergement (dépendance électrique) je n’héberge pas directement mon mail, mais je le collecte depuis d’autres services. Et comme toi j’ai fait la découverte que ce faisant, mme le SMTP de Yunohost n’est pas content. Par exemple, il refuse de relayer un mail dont l’émetteur est en @free.fr

Du coup, quand j’envoie du mail, j’envoie avec @mondomaire.fr avec un reply-to l’adresse que je collecte. J’ai aussi une redirection chez l’hébergeur de mon nom de domaine, pour renvoyer les mails n @mondomaine.fr vers @free.fr.

Pas idéal, mais ça fonctionne.

20

C’était pour l’installation de Rainloop… j’aurais dû préciser