Unable to reach DynDNS provider dyndns.yunohost.org using graphical or command-line methods

What type of hardware are you using: Raspberry Pi 3, 4+
What YunoHost version are you running: yunohost-bookworm-12.0-rpi-stable
How are you able to access your server: SSH
Are you in a special context or did you perform specific tweaking on your YunoHost instance ?: no

Describe your issue

Bonjour à tous,
J’ai tenté de flasher l’image de YunoHost v12.0 avec :

Le raspberry est connecté à ma freebox avec un câble RJ45.

  • 1 Par les deux manières, en méthode graphique via le navigateur,
    j’arrive à la page de postinstall avec écrit Félicitations ! YunoHost a été installé avec succès..
    Je suis les étapes successives en choisissant un domaine DynDNS gratuit fourni par le projet YunoHost (je les ai tous essayés).
    Je continue jusqu’au pop-up Vous êtes sur le point de lancer le processus de post-installation….
    Je suis systématiquement renvoyé à l’étape Définir le domaine principal.

  • 2 avec la commande yunohost tools postinstall directement via SSH,
    j’obtiens l’erreur qui suit:

Main domain: ******.ynh.fr
Admin username: **********
Admin full name: *********
New administration password: *********************************
Confirm new administration password: *********************************
Warning: The YunoHost project is a team of volunteers who have made common cause to create a free operating system for servers, called YunoHost. The YunoHost software is published under the AGPLv3 license (<https://www.gnu.org/licenses/agpl-3.0.txt>). In connection with this software, the project administers and makes available several technical and community services for various purposes. By using these services, you agree to be bound by the following Terms of Services: <https://yunohost.org/terms_of_services>.
I have read and understand the Terms of Services [Y/N]: Y
Error: Unable to reach DynDNS provider dyndns.yunohost.org: either your YunoHost is not correctly connected to the internet or the dynette server is down.```

Il semblerait que je ne sois pas connecté à internet avec le raspberry,
la carte wifi n'est pas reconnue et la connexion filaire ne me permet pas d'atteindre dyndns.yunohost.org.

Je ne peux pas aller plus loin dans la post installation avec mes connaissances.

Je vous remercie pour l'aide bienfaitrice que vous pourrez m'apporter.

arno



### Share relevant logs or error messages
Error: Unable to reach DynDNS provider dyndns.yunohost.org: either your YunoHost is not correctly connected to the internet or the dynette server is down.
1 Like

I am also having this problem, any solutions yet?

1 Like

Cela ressemble exactement à mon problème également, rapsberry 3B+, post install en boucle avec en ligne de commande le message suivant :

Error: Unable to reach DynDNS provider dyndns.yunohost.org: either your YunoHost is not correctly connected to the internet or the dynette server is down.

1 Like

que se soit RJ45 (nommé eth0) ou wifi (nommé wlan0) en générale
pour connaitre les adresse ip local

ifconfig

sur ta freebox va à cette adresse http://192.168.1.254
active le DMZ à l’adresse ip de ton RasPI
Et puis:

le mieux investir un nom de domaine chez OVH et relier chez cloudflare
biensur il faut que tu connect sur free.fr si ta bien une adresse ipv4 fix

Bonjour,

Meme probleme en voulant installer Yunohost sur raspberry 3+.
Install OK mais ensuite boucle sur Definir le domaine principal que soit en ligne de commande ou portail.

I am having the exact same problem with a raspberry pi 5. I have tried through browser and console directly to raspberry pi, and I get the same prompt

Unable to reach DynDNS provider DynDNS.yunohost.org either YunoHost is not connected to the internet or dinette server is down

I am installing on a raspberry pi from my home in Japan.

J’ai exactement le même soucis.
Et l’activation de la DMZ sur l’adresse IP du RPI n’a rien changé.

This topic was automatically closed 30 days after the last reply. New replies are no longer allowed.