Lenteurs depuis la MàJ vers buster/YNH4

Support
1

Matériel : vieux lenovo thinkcentre
Version de Yunohost : 4.0.8
J’ai accès à mon serveur : SSH en local ou en direct / par l’IP publique (statique)

Yo ! J’ai fait la mise à jour vers buster et YNH4, puis toutes les mises à jours possibles et même quelques downgrades qu’il me demandait (au niveau de php). Depuis je rencontre deux problèmes un peu relou :

  • l’interface admin est très très lente et assez capricieuse : une fois sur deux la version de YNH n’apparaît pas en bas et l’accès à un sous menu se solde par un pacman infini. La parade que j’ai trouvé c’est recharger la page autant de fois que nécessaire, me délogger/relogger 12 fois, à un moment ça passe…
  • l’accès par le réseau local est ultra lent ou carrément 504 erreur nginx, je soupçonnais que la route paramètrée dans mon routeur ne soit plus effective et que les requêtes passent par je sais pas où pour revenir dans le placard mais un simple traceroute me l’a démenti, c’est bien un composant de YNH qui pédale dans la semoule.

Quelqu’un a eu des soucis similaires ? Une solution ou je réinstalle tout :face_with_hand_over_mouth:

2

Salut,

effectivement ça a pas l’air normal …

naivement je commencerais par regarder un 'top' pour voir si il y a des processus qui bouffent tout le CPU ou la RAM …

3

Rien de fou : Nextcloud et MySQL qui prennent respectivement 3 et 5% de CPU et 2 et 3% de RAM…

4

Là par exemple je suis en local et l’admin ynh a refait des galipettes, airsonic ou wordpress font que des erreurs 504 et la console de vivaldi me renvoie :
The Content Security Policy 'upgrade-insecure-requests; default-src https: data: 'unsafe-inline' 'unsafe-eval'' was delivered in report-only mode, but does not specify a 'report-uri'; the policy will have no effect. Please either add a 'report-uri' directive, or deliver the policy via the 'Content-Security-Policy' header.

Pendant ce temps nextcloud rame à fond mais fonctionne et transmission par exemple est hyper réactif…

Au bout d’un quart d’heure, airsonic a changé de rengaine et renvoie des erreurs 500 puis refonctionne, l’interface admin est à nouveau cassée, puis tout remarche, bref c’est très instable. J’ai essayé de trouver des indices dans les logs de nginx mais rien d’alarmant…

5

Que donne les commandes suivantes :

free -m
iostat
6 
              total        used        free      shared  buff/cache   available
Mem:           7442        1507         119          97        5814        5542
Swap:          1999         886        1113

Linux 4.19.0-11-amd64 (centonze.noho.st)        26/10/2020      _x86_64_        (2 CPU)

avg-cpu:  %user   %nice %system %iowait  %steal   %idle
           7,98    0,00    1,19   23,58    0,00   67,24

Device             tps    kB_read/s    kB_wrtn/s    kB_read    kB_wrtn
sda              66,35      4111,66       830,38 2589048360  522874857
sdb               0,10         0,06        29,92      40193   18837364

sda c’est le DD interne
sdb c’est le SSD de backup, en USB (d’ailleurs au passage restic c’est super cool :smiley: )

7

Comment est configuré sdb ?

Là il y a quand même un iowait de 23%, ce qui semble beaucoup. Pour la ram, il y a largement ce qu’il faut.

8

sdb est formaté en ext4, monté au démarrage dans /media/stockage et après y’a restic qui fait ses sauvegardes dessus tranquillou, je sais pas ce que je peux te dire de plus à son propos…

9

Je suggère que tu testes l’écriture sur ton disque sda, car le iowait à 23% est vraiment bizarre.

dd if=/dev/zero of=/tmp/test1.img bs=1G count=1 oflag=dsync
dd if=/dev/zero of=/tmp/test2.img bs=512 count=1000 oflag=dsync
rm -f /tmp/test1.img
rm -f /tmp/test2.img
10

1073741824 octets (1,1 GB, 1,0 GiB) copiés, 38,2325 s, 28,1 MB/s

512000 octets (512 kB, 500 KiB) copiés, 233,826 s, 2,2 kB/s

Je suis pas sûr de bien piger de quoi tout ça est le symptôme/la cause… Mon DD est en train de clamser et ralentit tout le système ?

11

L’idée c’est de tester si c’est pas les disques qui sont trop lents et qui provoquent ces ralentissements (soit parce que tout le temps en train d’écrire, soit parce que usb, soit parce qu’en train de mourir. Dans ce genre de cas certaines commandes sont rapides et d’autres très lentes.

Tu peux faire un test pour vérifier la santé des disques avec l’outil smartmontools, dans certains cas cet outil peut détecter si le disque est en fin de vie.

La pour le premier dd 28MB/s me semble plutôt bas. Et concernant le deuxième je ne retrouve plus mon lien web pour l’interpréter (mais il me semble très bas)!

12

De mon côté :

  • sur une machine desktop avec disque ssd, dans un LXC, j’ai 73.9 kB/s
  • sur un rpi avec carte SD, j’ai 90.9 kB/s
  • (edit) sur un rpi vers un disque dur rotatif en USB (2.x je crois), j’ai 10.5 kB/s

Clairement 2.2kB/s (233s au total) ça parraît “pas optimal”

13

Ok donc mon DD est méga lent, ce qui peut être un signe de fin de vie, je vois le truc.
Ce que je ne m’explique pas c’est pourquoi ce problème apparaît soudainement après la màj vers buster, est-ce une belle coincidence ou les efforts que ça lui a demandé (plus les sauvegardes récentes) l’ont usé précipitamment ? C’est vrai que j’ai mis en place récemment mon backup et scanner tout le dd quotidiennement ça peut le fatiguer…

Maintenant, comment être sûr que le problème vient bien de là ? Et ensuite quelle solution pérenne apporter ? Un DD neuf va subir les mêmes contraintes et s’user vite aussi non ? Un SSD pour le système et un DD en plus pour les données ? J’ai un slot SATA occupé par le lecteur CD du pécé que je comptais remplacer par un DD de toutes façons

EDIT : j’ai lancé le test smartctl long, résultat à 21:11…

14

Jamais aucun résultat : tous les tests que j’ai pu lancer (long comme short) restent bloqués à 10% de la fin, l’état smart m’indique 13200h d’utilisation…

Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Aborted by host               10%     13203         -
# 2  Extended offline    Aborted by host               10%     13200         -

Le premier (sudo smartctl -t long /dev/sda) a tourné toute la nuit, le second (sudo smartctl -t short /dev/sda) toute la matinée.

sudo smartctl --attributes --log=selftest /dev/sda renvoie :

  1 Raw_Read_Error_Rate     0x002f   200   200   051    Pre-fail  Always       -       0
  3 Spin_Up_Time            0x0027   141   133   021    Pre-fail  Always       -       5950
  4 Start_Stop_Count        0x0032   087   087   000    Old_age   Always       -       13482
  5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x002e   200   200   000    Old_age   Always       -       0
  9 Power_On_Hours          0x0032   082   082   000    Old_age   Always       -       13204
 10 Spin_Retry_Count        0x0032   100   100   000    Old_age   Always       -       0
 11 Calibration_Retry_Count 0x0032   100   100   000    Old_age   Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       128
192 Power-Off_Retract_Count 0x0032   200   200   000    Old_age   Always       -       35
193 Load_Cycle_Count        0x0032   196   196   000    Old_age   Always       -       13482
194 Temperature_Celsius     0x0022   106   088   000    Old_age   Always       -       41
196 Reallocated_Event_Count 0x0032   200   200   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0032   200   200   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0030   200   200   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x0032   200   200   000    Old_age   Always       -       0
200 Multi_Zone_Error_Rate   0x0008   200   200   000    Old_age   Offline      -       0

J’imagine que s’il n’arrive jamais à terminer ça veut dire que le DD est rincé mais en même temps je ne vois rien d’alarmant dans le tableau d’état smart…

Maintenant pour cloner l’intégralité de ce DD sur un autre : vous avez une solution magique ? clonezilla ?

15

13200h = 1,5 an , dans les datacenter google les disques tiennent environ 5 ans.

Pour cloner tu peux utiliser la commande dd ou effectivement des trucs comme clonezilla

Que donne:

sudo smartctl --all /dev/sda | grep "SMART overall-health"

Si c’est pas marqué PASSED, c’est que le disque a un soucis.

Après on fait peut être fausse route, il faudrait peut être regarder du côté de dmesg.

Mais c’est sûr que le fait que le test ne finie jamais est mauvais signe. Un conseil: vérifies tes sauvegardes.

16

PASSED

Je checkerai les backups ce soir et en attendant je laisse tourner un test smart toute la journée, on sait jamais…

sudo dmesg renvoie quelques erreurs mais je suis bien incapable de les interpréter :

[    0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.19.0-11-amd64 root=UUID=4b70339b-8a53-4af5-8c8c-a24969e17806 ro quiet
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Enabled xstate features 0x3, context size is 576 bytes, using 'standard' format.
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009cfff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009d000-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000ce000-0x00000000000d3fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cff8ffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000cff90000-0x00000000cffaafff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000cffab000-0x00000000cffcefff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000cffcf000-0x00000000dfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000020dffffff] usable
[    0.000000] BIOS-e820: [mem 0x000000020e000000-0x000000020fffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.5 present.
[    0.000000] DMI: LENOVO 6137DV9/LENOVO, BIOS 5CKT63AUS 06/09/2010
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2992.585 MHz processor
[    0.002051] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.002053] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.002058] last_pfn = 0x20e000 max_arch_pfn = 0x400000000
[    0.002063] MTRR default type: uncachable
[    0.002063] MTRR fixed ranges enabled:
[    0.002065]   00000-9FFFF write-back
[    0.002065]   A0000-BFFFF uncachable
[    0.002066]   C0000-D3FFF write-protect
[    0.002067]   D4000-E3FFF uncachable
[    0.002067]   E4000-FFFFF write-protect
[    0.002068] MTRR variable ranges enabled:
[    0.002069]   0 base 000000000 mask F80000000 write-back
[    0.002070]   1 base 080000000 mask FC0000000 write-back
[    0.002071]   2 base 0C0000000 mask FE0000000 write-back
[    0.002072]   3 base 100000000 mask F00000000 write-back
[    0.002073]   4 base 200000000 mask F00000000 write-back
[    0.002074]   5 base 0D0000000 mask FF0000000 uncachable
[    0.002074]   6 disabled
[    0.003531] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.003620] e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved
[    0.003625] last_pfn = 0xcff90 max_arch_pfn = 0x400000000
[    0.010155] found SMP MP-table at [mem 0x000f6b20-0x000f6b2f]
[    0.017027] RAMDISK: [mem 0x3417b000-0x360b4fff]
[    0.017033] ACPI: Early table checksum verification disabled
[    0.017154] ACPI: RSDP 0x00000000000F68F0 000024 (v02 LENOVO)
[    0.017157] ACPI: XSDT 0x00000000CFF9D34D 0000B4 (v01 LENOVO TC-5C    0000013F  LTP 00000000)
[    0.017162] ACPI: TCPA 0x00000000CFFAABB9 000032 (v02 LENOVO TC-5C    0000013F PTL  00000000)
[    0.017165] ACPI: FACP 0x00000000CFFAABEB 0000F4 (v03 LENOVO TC-5C    0000013F PTL  00000002)
[    0.017170] ACPI: DSDT 0x00000000CFFA1423 009712 (v01 LENOVO TC-5C    0000013F MSFT 0100000E)
[    0.017172] ACPI: FACS 0x00000000CFFCEFC0 000040
[    0.017175] ACPI: FACS 0x00000000CFFCEFC0 000040
[    0.017177] ACPI: _MAR 0x00000000CFFAACDF 000030 (v01 LENOVO TC-5C    0000013F LOHR 00000001)
[    0.017180] ACPI: SLIC 0x00000000CFFAAD0F 000176 (v01 LENOVO TC-5C    0000013F  LTP 00000000)
[    0.017182] ACPI: MCFG 0x00000000CFFAAE85 00003C (v01 LENOVO TC-5C    0000013F  LTP 00000000)
[    0.017185] ACPI: HPET 0x00000000CFFAAEC1 000038 (v01 LENOVO TC-5C    0000013F  LTP 00000001)
[    0.017188] ACPI: APIC 0x00000000CFFAAEF9 000068 (v01 LENOVO TC-5C    0000013F  LTP 00000000)
[    0.017190] ACPI: BOOT 0x00000000CFFAAF61 000028 (v01 LENOVO TC-5C    0000013F  LTP 00000001)
[    0.017193] ACPI: ASF! 0x00000000CFFAAF89 000077 (v32 LENOVO TC-5C    0000013F PTL  00000001)
[    0.017196] ACPI: SSDT 0x00000000CFF9EC4D 00025F (v01 LENOVO TC-5C    0000013F INTL 20050228)
[    0.017199] ACPI: SSDT 0x00000000CFF9EBA7 0000A6 (v01 LENOVO TC-5C    0000013F INTL 20050228)
[    0.017201] ACPI: SSDT 0x00000000CFF9EB01 0000A6 (v01 LENOVO TC-5C    0000013F INTL 20050228)
[    0.017204] ACPI: SSDT 0x00000000CFF9EA5B 0000A6 (v01 LENOVO TC-5C    0000013F INTL 20050228)
[    0.017207] ACPI: SSDT 0x00000000CFF9E9B5 0000A6 (v01 LENOVO TC-5C    0000013F INTL 20050228)
[    0.017210] ACPI: SSDT 0x00000000CFF9E90F 0000A6 (v01 LENOVO TC-5C    0000013F INTL 20050228)
[    0.017212] ACPI: SSDT 0x00000000CFF9E869 0000A6 (v01 LENOVO TC-5C    0000013F INTL 20050228)
[    0.017215] ACPI: SSDT 0x00000000CFF9E7C3 0000A6 (v01 LENOVO TC-5C    0000013F INTL 20050228)
[    0.017218] ACPI: SSDT 0x00000000CFF9D401 0013C2 (v01 LENOVO TC-5C    0000013F INTL 20050228)
[    0.017226] ACPI: Local APIC address 0xfee00000
[    0.017303] No NUMA configuration found
[    0.017304] Faking a node at [mem 0x0000000000000000-0x000000020dffffff]
[    0.017308] NODE_DATA(0) allocated [mem 0x20dffa000-0x20dffefff]
[    0.017336] Zone ranges:
[    0.017337]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.017338]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.017339]   Normal   [mem 0x0000000100000000-0x000000020dffffff]
[    0.017340]   Device   empty
[    0.017341] Movable zone start for each node
[    0.017342] Early memory node ranges
[    0.017342]   node   0: [mem 0x0000000000001000-0x000000000009cfff]
[    0.017343]   node   0: [mem 0x0000000000100000-0x00000000cff8ffff]
[    0.017344]   node   0: [mem 0x0000000100000000-0x000000020dffffff]
[    0.017481] Zeroed struct page in unavailable ranges: 8404 pages
[    0.017482] Initmem setup node 0 [mem 0x0000000000001000-0x000000020dffffff]
[    0.017483] On node 0 totalpages: 1957676
[    0.017484]   DMA zone: 64 pages used for memmap
[    0.017484]   DMA zone: 21 pages reserved
[    0.017485]   DMA zone: 3996 pages, LIFO batch:0
[    0.017573]   DMA32 zone: 13247 pages used for memmap
[    0.017574]   DMA32 zone: 847760 pages, LIFO batch:63
[    0.037201]   Normal zone: 17280 pages used for memmap
[    0.037202]   Normal zone: 1105920 pages, LIFO batch:63
[    0.062152] Reserving Intel graphics memory at [mem 0xd8000000-0xdfffffff]
[    0.062261] ACPI: PM-Timer IO Port: 0x1008
[    0.062263] ACPI: Local APIC address 0xfee00000
[    0.062271] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.062272] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.062285] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.062287] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[    0.062289] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.062290] ACPI: IRQ0 used by override.
[    0.062291] ACPI: IRQ9 used by override.
[    0.062293] Using ACPI (MADT) for SMP configuration information
[    0.062294] ACPI: HPET id: 0xffffffff base: 0xfed00000
[    0.062300] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[    0.062316] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.062318] PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
[    0.062318] PM: Registered nosave memory: [mem 0x000a0000-0x000cdfff]
[    0.062319] PM: Registered nosave memory: [mem 0x000ce000-0x000d3fff]
[    0.062319] PM: Registered nosave memory: [mem 0x000d4000-0x000dffff]
[    0.062320] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.062321] PM: Registered nosave memory: [mem 0xcff90000-0xcffaafff]
[    0.062322] PM: Registered nosave memory: [mem 0xcffab000-0xcffcefff]
[    0.062322] PM: Registered nosave memory: [mem 0xcffcf000-0xdfffffff]
[    0.062323] PM: Registered nosave memory: [mem 0xe0000000-0xf7ffffff]
[    0.062323] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.062324] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[    0.062325] PM: Registered nosave memory: [mem 0xfec00000-0xfec0ffff]
[    0.062325] PM: Registered nosave memory: [mem 0xfec10000-0xfedfffff]
[    0.062326] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.062326] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[    0.062327] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.062329] [mem 0xe0000000-0xf7ffffff] available for PCI devices
[    0.062330] Booting paravirtualized kernel on bare hardware
[    0.062333] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.188365] random: get_random_bytes called from start_kernel+0x93/0x52a with crng_init=0
[    0.188371] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1
[    0.188932] percpu: Embedded 45 pages/cpu s144408 r8192 d31720 u1048576
[    0.188937] pcpu-alloc: s144408 r8192 d31720 u1048576 alloc=1*2097152
[    0.188938] pcpu-alloc: [0] 0 1 
[    0.188959] Built 1 zonelists, mobility grouping on.  Total pages: 1927064
[    0.188960] Policy zone: Normal
[    0.188962] Kernel command line: BOOT_IMAGE=/vmlinuz-4.19.0-11-amd64 root=UUID=4b70339b-8a53-4af5-8c8c-a24969e17806 ro quiet
[    0.205125] Calgary: detecting Calgary via BIOS EBDA area
[    0.205127] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.259429] Memory: 7584668K/7830704K available (10252K kernel code, 1241K rwdata, 3320K rodata, 1592K init, 2272K bss, 246036K reserved, 0K cma-reserved)
[    0.259540] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.259550] Kernel/User page tables isolation: enabled
[    0.259604] ftrace: allocating 31915 entries in 125 pages
[    0.273321] rcu: Hierarchical RCU implementation.
[    0.273323] rcu: 	RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=2.
[    0.273324] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.276237] NR_IRQS: 33024, nr_irqs: 440, preallocated irqs: 16
[    0.277878] Console: colour VGA+ 80x25
[    0.277882] console [tty0] enabled
[    0.277898] ACPI: Core revision 20180810
[    0.278074] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.278084] hpet clockevent registered
[    0.278088] APIC: Switch to symmetric I/O mode setup
[    0.278536] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.298087] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2b22e8f53fc, max_idle_ns: 440795332651 ns
[    0.298098] Calibrating delay loop (skipped), value calculated using timer frequency.. 5985.17 BogoMIPS (lpj=11970340)
[    0.298100] pid_max: default: 32768 minimum: 301
[    0.298128] Security Framework initialized
[    0.298129] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.298147] AppArmor: AppArmor initialized
[    0.300596] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.302218] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.302289] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.302342] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.302603] process: using mwait in idle threads
[    0.302607] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[    0.302608] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
[    0.302610] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.302611] Spectre V2 : Mitigation: Full generic retpoline
[    0.302612] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.302612] Speculative Store Bypass: Vulnerable
[    0.302640] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[    0.302785] Freeing SMP alternatives memory: 24K
[    0.418173] smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU     E8400  @ 3.00GHz (family: 0x6, model: 0x17, stepping: 0xa)
[    0.418298] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[    0.418305] ... version:                2
[    0.418306] ... bit width:              40
[    0.418306] ... generic registers:      2
[    0.418307] ... value mask:             000000ffffffffff
[    0.418308] ... max period:             000000007fffffff
[    0.418308] ... fixed-purpose events:   3
[    0.418309] ... event mask:             0000000700000003
[    0.418356] rcu: Hierarchical SRCU implementation.
[    0.418906] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.418944] smp: Bringing up secondary CPUs ...
[    0.419047] x86: Booting SMP configuration:
[    0.419047] .... node  #0, CPUs:      #1
[    0.421769] smp: Brought up 1 node, 2 CPUs
[    0.421769] smpboot: Max logical packages: 1
[    0.421769] smpboot: Total of 2 processors activated (11970.34 BogoMIPS)
[    0.422563] devtmpfs: initialized
[    0.422563] x86/mm: Memory block size: 128MB
[    0.422563] PM: Registering ACPI NVS region [mem 0xcffab000-0xcffcefff] (147456 bytes)
[    0.422563] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.422563] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.422563] pinctrl core: initialized pinctrl subsystem
[    0.422563] NET: Registered protocol family 16
[    0.422563] audit: initializing netlink subsys (disabled)
[    0.426094] audit: type=2000 audit(1603109070.148:1): state=initialized audit_enabled=0 res=1
[    0.426193] cpuidle: using governor ladder
[    0.426196] cpuidle: using governor menu
[    0.426221] Simple Boot Flag at 0x36 set to 0x80
[    0.426231] ACPI: bus type PCI registered
[    0.426232] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.426293] PCI: MMCONFIG for domain 0000 [bus 00-10] at [mem 0xf8000000-0xf90fffff] (base 0xf8000000)
[    0.426295] PCI: MMCONFIG at [mem 0xf8000000-0xf90fffff] reserved in E820
[    0.426304] PCI: Using configuration type 1 for base access
[    0.426326] mtrr: your CPUs had inconsistent variable MTRR settings
[    0.426326] mtrr: probably your BIOS does not setup all CPUs.
[    0.426326] mtrr: corrected configuration.
[    0.426935] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.426935] ACPI: Added _OSI(Module Device)
[    0.426935] ACPI: Added _OSI(Processor Device)
[    0.426935] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.426935] ACPI: Added _OSI(Processor Aggregator Device)
[    0.426935] ACPI: Added _OSI(Linux-Dell-Video)
[    0.426935] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.428765] ACPI: 10 ACPI AML tables successfully acquired and loaded
[    0.431253] ACPI: Dynamic OEM Table Load:
[    0.431259] ACPI: SSDT 0xFFFF922E44F88200 0001DD (v01 LENOVO TC-5C    0000013F INTL 20050228)
[    0.431463] ACPI: Dynamic OEM Table Load:
[    0.431467] ACPI: SSDT 0xFFFF922E44F85800 00067D (v01 LENOVO TC-5C    0000013F INTL 20050228)
[    0.431880] ACPI: Dynamic OEM Table Load:
[    0.431885] ACPI: SSDT 0xFFFF922E44F89000 00016E (v01 LENOVO TC-5C    0000013F INTL 20050228)
[    0.432032] ACPI: Dynamic OEM Table Load:
[    0.432036] ACPI: SSDT 0xFFFF922E44F640C0 000085 (v01 LENOVO TC-5C    0000013F INTL 20050228)
[    0.432344] ACPI: Interpreter enabled
[    0.432357] ACPI: (supports S0 S3 S4 S5)
[    0.432358] ACPI: Using IOAPIC for interrupt routing
[    0.432376] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.432542] ACPI: Enabled 13 GPEs in block 00 to 3F
[    0.438323] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
[    0.438327] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.438364] ACPI BIOS Error (bug): Failure creating [\_SB.PCI0._OSC.CAPB], AE_ALREADY_EXISTS (20180810/dsfield-183)
[    0.438406] ACPI Error: Method parse/execution failed \_SB.PCI0._OSC, AE_ALREADY_EXISTS (20180810/psparse-516)
[    0.438447] acpi PNP0A03:00: _OSC failed (AE_ALREADY_EXISTS); disabling ASPM
[    0.438456] acpi PNP0A03:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-10] only partially covers this bridge
[    0.438796] acpi PNP0A03:00: host bridge window expanded to [mem 0xe0000000-0xfffffffe window]; [mem 0xfed40000-0xfed4ffff window] ignored
[    0.438994] PCI host bridge to bus 0000:00
[    0.438995] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.438997] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.438998] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[    0.438999] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[    0.439000] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[    0.439001] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfffffffe window]
[    0.439002] pci_bus 0000:00: root bus resource [io  0x0d00-0xfdff window]
[    0.439004] pci_bus 0000:00: root bus resource [bus 00-3f]
[    0.439010] pci 0000:00:00.0: [8086:2e10] type 00 class 0x060000
[    0.439028] DMAR: Disabling IOMMU for graphics on this chipset
[    0.439029] DMAR: Forcing write-buffer flush capability
[    0.439104] pci 0000:00:01.0: [8086:2e11] type 01 class 0x060400
[    0.439137] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.439218] pci 0000:00:02.0: [8086:2e12] type 00 class 0x030000
[    0.439226] pci 0000:00:02.0: reg 0x10: [mem 0xfc000000-0xfc3fffff 64bit]
[    0.439231] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.439234] pci 0000:00:02.0: reg 0x20: [io  0x1c70-0x1c77]
[    0.439321] pci 0000:00:02.1: [8086:2e13] type 00 class 0x038000
[    0.439329] pci 0000:00:02.1: reg 0x10: [mem 0xfc400000-0xfc4fffff 64bit]
[    0.439429] pci 0000:00:03.0: [8086:2e14] type 00 class 0x078000
[    0.439455] pci 0000:00:03.0: reg 0x10: [mem 0xfc624000-0xfc62400f 64bit]
[    0.439538] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[    0.439618] pci 0000:00:03.2: [8086:2e16] type 00 class 0x010185
[    0.439631] pci 0000:00:03.2: reg 0x10: [io  0x1c88-0x1c8f]
[    0.439635] pci 0000:00:03.2: reg 0x14: [io  0x1c7c-0x1c7f]
[    0.439639] pci 0000:00:03.2: reg 0x18: [io  0x1c80-0x1c87]
[    0.439644] pci 0000:00:03.2: reg 0x1c: [io  0x1c78-0x1c7b]
[    0.439648] pci 0000:00:03.2: reg 0x20: [io  0x1c40-0x1c4f]
[    0.439741] pci 0000:00:03.3: [8086:2e17] type 00 class 0x070002
[    0.439752] pci 0000:00:03.3: reg 0x10: [io  0x1c90-0x1c97]
[    0.439756] pci 0000:00:03.3: reg 0x14: [mem 0xfc626000-0xfc626fff]
[    0.439932] pci 0000:00:19.0: [8086:10de] type 00 class 0x020000
[    0.439953] pci 0000:00:19.0: reg 0x10: [mem 0xfc600000-0xfc61ffff]
[    0.439961] pci 0000:00:19.0: reg 0x14: [mem 0xfc627000-0xfc627fff]
[    0.439970] pci 0000:00:19.0: reg 0x18: [io  0x1820-0x183f]
[    0.440035] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[    0.440125] pci 0000:00:1a.0: [8086:3a67] type 00 class 0x0c0300
[    0.440172] pci 0000:00:1a.0: reg 0x20: [io  0x1840-0x185f]
[    0.440289] pci 0000:00:1a.1: [8086:3a68] type 00 class 0x0c0300
[    0.440336] pci 0000:00:1a.1: reg 0x20: [io  0x1860-0x187f]
[    0.440455] pci 0000:00:1a.2: [8086:3a69] type 00 class 0x0c0300
[    0.440502] pci 0000:00:1a.2: reg 0x20: [io  0x1880-0x189f]
[    0.440626] pci 0000:00:1a.7: [8086:3a6c] type 00 class 0x0c0320
[    0.440647] pci 0000:00:1a.7: reg 0x10: [mem 0xfc628000-0xfc6283ff]
[    0.440725] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[    0.440815] pci 0000:00:1b.0: [8086:3a6e] type 00 class 0x040300
[    0.440839] pci 0000:00:1b.0: reg 0x10: [mem 0xfc620000-0xfc623fff 64bit]
[    0.440924] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.441011] pci 0000:00:1d.0: [8086:3a64] type 00 class 0x0c0300
[    0.441058] pci 0000:00:1d.0: reg 0x20: [io  0x18a0-0x18bf]
[    0.441176] pci 0000:00:1d.1: [8086:3a65] type 00 class 0x0c0300
[    0.441223] pci 0000:00:1d.1: reg 0x20: [io  0x18c0-0x18df]
[    0.441343] pci 0000:00:1d.2: [8086:3a66] type 00 class 0x0c0300
[    0.441391] pci 0000:00:1d.2: reg 0x20: [io  0x18e0-0x18ff]
[    0.441515] pci 0000:00:1d.7: [8086:3a6a] type 00 class 0x0c0320
[    0.441536] pci 0000:00:1d.7: reg 0x10: [mem 0xfc629000-0xfc6293ff]
[    0.441613] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.441700] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[    0.441846] pci 0000:00:1f.0: [8086:3a14] type 00 class 0x060100
[    0.442014] pci 0000:00:1f.2: [8086:3a02] type 00 class 0x010601
[    0.442036] pci 0000:00:1f.2: reg 0x10: [io  0x1ca8-0x1caf]
[    0.442044] pci 0000:00:1f.2: reg 0x14: [io  0x1c9c-0x1c9f]
[    0.442053] pci 0000:00:1f.2: reg 0x18: [io  0x1ca0-0x1ca7]
[    0.442062] pci 0000:00:1f.2: reg 0x1c: [io  0x1c98-0x1c9b]
[    0.442070] pci 0000:00:1f.2: reg 0x20: [io  0x1c00-0x1c1f]
[    0.442079] pci 0000:00:1f.2: reg 0x24: [mem 0xfc62a000-0xfc62a7ff]
[    0.442130] pci 0000:00:1f.2: PME# supported from D3hot
[    0.442216] pci 0000:00:1f.3: [8086:3a60] type 00 class 0x0c0500
[    0.442237] pci 0000:00:1f.3: reg 0x10: [mem 0xfc62b000-0xfc62b0ff 64bit]
[    0.442260] pci 0000:00:1f.3: reg 0x20: [io  0x1c20-0x1c3f]
[    0.442387] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
[    0.442405] pci 0000:01:00.0: reg 0x10: [io  0x2000-0x20ff]
[    0.442422] pci 0000:01:00.0: reg 0x18: [mem 0xfc500000-0xfc500fff 64bit]
[    0.442433] pci 0000:01:00.0: reg 0x20: [mem 0xfc900000-0xfc903fff 64bit pref]
[    0.442492] pci 0000:01:00.0: supports D1 D2
[    0.442493] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.442565] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.442567] pci 0000:00:01.0:   bridge window [io  0x2000-0x2fff]
[    0.442569] pci 0000:00:01.0:   bridge window [mem 0xfc500000-0xfc5fffff]
[    0.442571] pci 0000:00:01.0:   bridge window [mem 0xfc900000-0xfc9fffff 64bit pref]
[    0.442590] pci_bus 0000:11: extended config space not accessible
[    0.442639] pci 0000:00:1e.0: PCI bridge to [bus 11] (subtractive decode)
[    0.442649] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.442650] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.442651] pci 0000:00:1e.0:   bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
[    0.442652] pci 0000:00:1e.0:   bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
[    0.442653] pci 0000:00:1e.0:   bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
[    0.442655] pci 0000:00:1e.0:   bridge window [mem 0xe0000000-0xfffffffe window] (subtractive decode)
[    0.442656] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xfdff window] (subtractive decode)
[    0.442885] ACPI: PCI Interrupt Link [LNKA] (IRQs *3 4 5 6 7 10 11 12 14 15)
[    0.442928] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[    0.442971] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[    0.443013] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.443057] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.443101] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.443146] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.443190] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.443212] platform INT0800:00: failed to claim resource 0: [mem 0xff800000-0xffffffff]
[    0.443245] acpi INT0800:00: platform device creation failed: -16
[    0.443891] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.443891] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.443891] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.443891] vgaarb: loaded
[    0.443891] pps_core: LinuxPPS API ver. 1 registered
[    0.443891] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.443891] PTP clock support registered
[    0.443891] EDAC MC: Ver: 3.0.0
[    0.443891] PCI: Using ACPI for IRQ routing
[    0.443891] PCI: pci_cache_line_size set to 64 bytes
[    0.443891] Expanded resource Reserved due to conflict with PCI Bus 0000:00
[    0.443891] e820: reserve RAM buffer [mem 0x0009d000-0x0009ffff]
[    0.443891] e820: reserve RAM buffer [mem 0xcff90000-0xcfffffff]
[    0.443891] e820: reserve RAM buffer [mem 0x20e000000-0x20fffffff]
[    0.443891] HPET: 8 timers in total, 2 timers will be used for per-cpu timer
[    0.443891] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 24, 25, 0, 0, 0, 0
[    0.443891] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.446102] hpet: hpet2 irq 24 for MSI
[    0.446113] hpet: hpet3 irq 25 for MSI
[    0.446113] clocksource: Switched to clocksource tsc-early
[    0.458131] VFS: Disk quotas dquot_6.6.0
[    0.458150] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.458281] AppArmor: AppArmor Filesystem Enabled
[    0.458301] pnp: PnP ACPI init
[    0.458543] system 00:00: [io  0x0500-0x057f] has been reserved
[    0.458545] system 00:00: [io  0x0800-0x080f] has been reserved
[    0.458547] system 00:00: [io  0x1000-0x107f] has been reserved
[    0.458548] system 00:00: [io  0x1180-0x11bf] has been reserved
[    0.458550] system 00:00: [io  0x04d0-0x04d1] has been reserved
[    0.458551] system 00:00: [io  0xfe00] has been reserved
[    0.458553] system 00:00: [mem 0xfed14000-0xfed17fff] has been reserved
[    0.458555] system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.458556] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.458558] system 00:00: [mem 0xfed12000-0xfed12fff] has been reserved
[    0.458559] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.458561] system 00:00: [mem 0xfef00000-0xfeffffff] has been reserved
[    0.458562] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.458564] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.458565] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.458567] system 00:00: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.458568] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.458574] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.458625] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.458891] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.459186] pnp 00:03: [dma 2]
[    0.459215] pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active)
[    0.459508] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.459545] pnp 00:05: Plug and Play ACPI device, IDs WEC1000 PNP0c31 (active)
[    0.459573] pnp: PnP ACPI: found 6 devices
[    0.465518] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.465528] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.465531] pci 0000:00:01.0:   bridge window [io  0x2000-0x2fff]
[    0.465533] pci 0000:00:01.0:   bridge window [mem 0xfc500000-0xfc5fffff]
[    0.465535] pci 0000:00:01.0:   bridge window [mem 0xfc900000-0xfc9fffff 64bit pref]
[    0.465539] pci 0000:00:1e.0: PCI bridge to [bus 11]
[    0.465550] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.465551] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff window]
[    0.465552] pci_bus 0000:00: resource 6 [mem 0x000d4000-0x000d7fff window]
[    0.465554] pci_bus 0000:00: resource 7 [mem 0x000d8000-0x000dbfff window]
[    0.465555] pci_bus 0000:00: resource 8 [mem 0x000dc000-0x000dffff window]
[    0.465556] pci_bus 0000:00: resource 9 [mem 0xe0000000-0xfffffffe window]
[    0.465557] pci_bus 0000:00: resource 10 [io  0x0d00-0xfdff window]
[    0.465558] pci_bus 0000:01: resource 0 [io  0x2000-0x2fff]
[    0.465559] pci_bus 0000:01: resource 1 [mem 0xfc500000-0xfc5fffff]
[    0.465561] pci_bus 0000:01: resource 2 [mem 0xfc900000-0xfc9fffff 64bit pref]
[    0.465562] pci_bus 0000:11: resource 4 [io  0x0000-0x0cf7 window]
[    0.465563] pci_bus 0000:11: resource 5 [mem 0x000a0000-0x000bffff window]
[    0.465564] pci_bus 0000:11: resource 6 [mem 0x000d4000-0x000d7fff window]
[    0.465566] pci_bus 0000:11: resource 7 [mem 0x000d8000-0x000dbfff window]
[    0.465567] pci_bus 0000:11: resource 8 [mem 0x000dc000-0x000dffff window]
[    0.465568] pci_bus 0000:11: resource 9 [mem 0xe0000000-0xfffffffe window]
[    0.465569] pci_bus 0000:11: resource 10 [io  0x0d00-0xfdff window]
[    0.465637] NET: Registered protocol family 2
[    0.465785] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes)
[    0.465827] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    0.466016] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.466330] TCP: Hash tables configured (established 65536 bind 65536)
[    0.466375] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.466420] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.466492] NET: Registered protocol family 1
[    0.466497] NET: Registered protocol family 44
[    0.466507] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.468048] PCI: CLS 32 bytes, default 64
[    0.468082] Unpacking initramfs...
[    0.949414] Freeing initrd memory: 31976K
[    0.949466] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.949469] software IO TLB: mapped [mem 0xcbf90000-0xcff90000] (64MB)
[    0.950201] Initialise system trusted keyrings
[    0.950211] Key type blacklist registered
[    0.950268] workingset: timestamp_bits=40 max_order=21 bucket_order=0
[    0.951842] zbud: loaded
[    0.958093] random: fast init done
[    1.142291] Key type asymmetric registered
[    1.142293] Asymmetric key parser 'x509' registered
[    1.142303] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[    1.142327] io scheduler noop registered
[    1.142328] io scheduler deadline registered
[    1.142360] io scheduler cfq registered (default)
[    1.142361] io scheduler mq-deadline registered
[    1.142654] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    1.142669] intel_idle: does not run on family 6 model 23
[    1.142734] Monitor-Mwait will be used to enter C-1 state
[    1.142740] Monitor-Mwait will be used to enter C-2 state
[    1.142743] tsc: Marking TSC unstable due to TSC halts in idle
[    1.143576] clocksource: Switched to clocksource hpet
[    1.143703] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.164354] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    1.184942] 0000:00:03.3: ttyS1 at I/O 0x1c90 (irq = 17, base_baud = 115200) is a 16550A
[    1.185130] Linux agpgart interface v0.103
[    1.185247] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    1.185248] AMD IOMMUv2 functionality not available on this system
[    1.185409] i8042: PNP: No PS/2 controller found.
[    1.185466] mousedev: PS/2 mouse device common for all mice
[    1.185496] rtc_cmos 00:01: RTC can wake from S4
[    1.185645] rtc_cmos 00:01: registered as rtc0
[    1.185664] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    1.185688] ledtrig-cpu: registered to indicate activity on CPUs
[    1.186159] NET: Registered protocol family 10
[    1.192493] Segment Routing with IPv6
[    1.192510] mip6: Mobile IPv6
[    1.192513] NET: Registered protocol family 17
[    1.192542] mpls_gso: MPLS GSO support
[    1.192634] mce: Using 6 MCE banks
[    1.192667] microcode: sig=0x1067a, pf=0x1, revision=0xa07
[    1.192708] microcode: Microcode Update Driver: v2.2.
[    1.192832] registered taskstats version 1
[    1.192833] Loading compiled-in X.509 certificates
[    1.236647] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1'
[    1.236660] Loaded X.509 cert 'Debian Secure Boot Signer 2020: 00b55eb3b9'
[    1.236673] zswap: loaded using pool lzo/zbud
[    1.236761] AppArmor: AppArmor sha1 policy hashing enabled
[    1.237122] rtc_cmos 00:01: setting system clock to 2020-10-19 12:04:31 UTC (1603109071)
[    1.237153] Unstable clock detected, switching default tracing clock to "global"
               If you want to keep using the local clock, then add:
                 "trace_clock=local"
               on the kernel command line
[    1.238961] Freeing unused kernel image memory: 1592K
[    1.250117] Write protecting the kernel read-only data: 16384k
[    1.250843] Freeing unused kernel image memory: 2028K
[    1.251087] Freeing unused kernel image memory: 776K
[    1.261741] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.261795] x86/mm: Checking user space page tables
[    1.272263] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.272264] Run /init as init process
[    1.357490] r8169 0000:01:00.0: can't disable ASPM; OS doesn't have ASPM control
[    1.362352] SCSI subsystem initialized
[    1.367738] FDC 0 is a post-1991 82077
[    1.367795] libphy: r8169: probed
[    1.368293] r8169 0000:01:00.0 eth0: RTL8168e/8111e, 50:3e:aa:0b:4c:f7, XID 2c200000, IRQ 26
[    1.368294] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    1.374241] libata version 3.00 loaded.
[    1.408698] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[    1.408699] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    1.408889] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[    1.411458] ahci 0000:00:1f.2: version 3.0
[    1.411654] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0xb impl SATA mode
[    1.411656] ahci 0000:00:1f.2: flags: 64bit ncq sntf led clo pmp pio slum part sxs 
[    1.414805] i801_smbus 0000:00:1f.3: enabling device (0001 -> 0003)
[    1.414925] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    1.417852] scsi host0: ahci
[    1.418548] scsi host1: ahci
[    1.418750] scsi host2: ahci
[    1.418947] scsi host3: ahci
[    1.419416] ACPI: bus type USB registered
[    1.419438] usbcore: registered new interface driver usbfs
[    1.419447] usbcore: registered new interface driver hub
[    1.419597] usbcore: registered new device driver usb
[    1.420497] ACPI Warning: SystemIO range 0x0000000000001028-0x000000000000102F conflicts with OpRegion 0x0000000000001000-0x000000000000102F (\_SB.PCI0.LPC0.PMIO) (20180810/utaddress-213)
[    1.420502] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    1.420504] ACPI Warning: SystemIO range 0x0000000000001180-0x00000000000011AF conflicts with OpRegion 0x0000000000001180-0x00000000000011AF (\_SB.PCI0.LPC0.GPOX) (20180810/utaddress-213)
[    1.420507] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    1.420530] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    1.425771] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.427172] ehci-pci: EHCI PCI platform driver
[    1.427335] ehci-pci 0000:00:1a.7: EHCI Host Controller
[    1.427341] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
[    1.427353] ehci-pci 0000:00:1a.7: debug port 1
[    1.429912] uhci_hcd: USB Universal Host Controller Interface driver
[    1.431271] ehci-pci 0000:00:1a.7: cache line size of 32 is not supported
[    1.438952] ehci-pci 0000:00:1a.7: irq 18, io mem 0xfc628000
[    1.439238] scsi host4: ahci
[    1.439856] scsi host5: ahci
[    1.439936] ata1: SATA max UDMA/133 abar m2048@0xfc62a000 port 0xfc62a100 irq 28
[    1.439939] ata2: SATA max UDMA/133 abar m2048@0xfc62a000 port 0xfc62a180 irq 28
[    1.439940] ata3: DUMMY
[    1.439943] ata4: SATA max UDMA/133 abar m2048@0xfc62a000 port 0xfc62a280 irq 28
[    1.439943] ata5: DUMMY
[    1.439944] ata6: DUMMY
[    1.450290] r8169 0000:01:00.0 enp1s0: renamed from eth0
[    1.454125] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    1.454205] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[    1.454208] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.454210] usb usb1: Product: EHCI Host Controller
[    1.454211] usb usb1: Manufacturer: Linux 4.19.0-11-amd64 ehci_hcd
[    1.454213] usb usb1: SerialNumber: 0000:00:1a.7
[    1.454358] hub 1-0:1.0: USB hub found
[    1.454364] hub 1-0:1.0: 6 ports detected
[    1.454526] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    1.454532] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 2
[    1.454539] uhci_hcd 0000:00:1a.0: detected 2 ports
[    1.454570] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001840
[    1.454623] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19
[    1.454624] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.454625] usb usb2: Product: UHCI Host Controller
[    1.454626] usb usb2: Manufacturer: Linux 4.19.0-11-amd64 uhci_hcd
[    1.454628] usb usb2: SerialNumber: 0000:00:1a.0
[    1.454730] hub 2-0:1.0: USB hub found
[    1.454738] hub 2-0:1.0: 2 ports detected
[    1.454937] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    1.454942] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 3
[    1.454952] ehci-pci 0000:00:1d.7: debug port 1
[    1.458859] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
[    1.458918] ehci-pci 0000:00:1d.7: irq 16, io mem 0xfc629000
[    1.474124] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    1.474185] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[    1.474187] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.474189] usb usb3: Product: EHCI Host Controller
[    1.474191] usb usb3: Manufacturer: Linux 4.19.0-11-amd64 ehci_hcd
[    1.474192] usb usb3: SerialNumber: 0000:00:1d.7
[    1.474311] hub 3-0:1.0: USB hub found
[    1.474316] hub 3-0:1.0: 6 ports detected
[    1.474459] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    1.474465] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[    1.474470] uhci_hcd 0000:00:1a.1: detected 2 ports
[    1.474499] uhci_hcd 0000:00:1a.1: irq 17, io base 0x00001860
[    1.474554] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19
[    1.474556] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.474557] usb usb4: Product: UHCI Host Controller
[    1.474558] usb usb4: Manufacturer: Linux 4.19.0-11-amd64 uhci_hcd
[    1.474559] usb usb4: SerialNumber: 0000:00:1a.1
[    1.474651] hub 4-0:1.0: USB hub found
[    1.474658] hub 4-0:1.0: 2 ports detected
[    1.474854] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[    1.474859] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[    1.474865] uhci_hcd 0000:00:1a.2: detected 2 ports
[    1.474882] uhci_hcd 0000:00:1a.2: irq 18, io base 0x00001880
[    1.475407] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19
[    1.475409] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.475410] usb usb5: Product: UHCI Host Controller
[    1.475411] usb usb5: Manufacturer: Linux 4.19.0-11-amd64 uhci_hcd
[    1.475412] usb usb5: SerialNumber: 0000:00:1a.2
[    1.475505] hub 5-0:1.0: USB hub found
[    1.475512] hub 5-0:1.0: 2 ports detected
[    1.475872] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    1.475876] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[    1.475882] uhci_hcd 0000:00:1d.0: detected 2 ports
[    1.475900] uhci_hcd 0000:00:1d.0: irq 16, io base 0x000018a0
[    1.475947] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19
[    1.475949] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.475950] usb usb6: Product: UHCI Host Controller
[    1.475951] usb usb6: Manufacturer: Linux 4.19.0-11-amd64 uhci_hcd
[    1.475952] usb usb6: SerialNumber: 0000:00:1d.0
[    1.476038] hub 6-0:1.0: USB hub found
[    1.476044] hub 6-0:1.0: 2 ports detected
[    1.476347] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    1.476351] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[    1.476357] uhci_hcd 0000:00:1d.1: detected 2 ports
[    1.476375] uhci_hcd 0000:00:1d.1: irq 17, io base 0x000018c0
[    1.476854] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19
[    1.476855] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.476857] usb usb7: Product: UHCI Host Controller
[    1.476858] usb usb7: Manufacturer: Linux 4.19.0-11-amd64 uhci_hcd
[    1.476859] usb usb7: SerialNumber: 0000:00:1d.1
[    1.476950] hub 7-0:1.0: USB hub found
[    1.476956] hub 7-0:1.0: 2 ports detected
[    1.477150] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    1.477155] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[    1.477160] uhci_hcd 0000:00:1d.2: detected 2 ports
[    1.477178] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018e0
[    1.477342] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19
[    1.477344] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.477345] usb usb8: Product: UHCI Host Controller
[    1.477346] usb usb8: Manufacturer: Linux 4.19.0-11-amd64 uhci_hcd
[    1.477347] usb usb8: SerialNumber: 0000:00:1d.2
[    1.477432] hub 8-0:1.0: USB hub found
[    1.477438] hub 8-0:1.0: 2 ports detected
[    1.631461] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 1c:6f:65:03:ac:f8
[    1.631463] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[    1.631510] e1000e 0000:00:19.0 eth0: MAC: 8, PHY: 8, PBA No: FFFFFF-0FF
[    1.632269] e1000e 0000:00:19.0 enp0s25: renamed from eth0
[    1.752532] ata4: SATA link down (SStatus 0 SControl 300)
[    1.810115] usb 3-2: new high-speed USB device number 2 using ehci-pci
[    1.914125] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.914148] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.914445] ata2.00: ATAPI: ATAPI   DVD D  DH16D5S, VL34, max UDMA/100
[    1.915361] ata1.00: ATA-8: WDC WD5000AAVS-22G9B1, 05.04C05, max UDMA/133
[    1.915363] ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 32), AA
[    1.915621] ata2.00: configured for UDMA/100
[    1.916261] ata1.00: configured for UDMA/133
[    1.916449] scsi 0:0:0:0: Direct-Access     ATA      WDC WD5000AAVS-2 4C05 PQ: 0 ANSI: 5
[    1.919314] scsi 1:0:0:0: CD-ROM            ATAPI    DVD D  DH16D5S   VL34 PQ: 0 ANSI: 5
[    1.952635] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[    1.952643] sd 0:0:0:0: [sda] Write Protect is off
[    1.952645] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.952658] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.966342]  sda: sda1 sda2 < sda5 sda6 >
[    1.966763] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.967960] usb 3-2: New USB device found, idVendor=152d, idProduct=1576, bcdDevice= 2.04
[    1.967962] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.967963] usb 3-2: Product: JMS579
[    1.967964] usb 3-2: Manufacturer: JMicron
[    1.967965] usb 3-2: SerialNumber: 987654321029
[    1.972247] usbcore: registered new interface driver usb-storage
[    1.974147] scsi host6: uas
[    1.974256] usbcore: registered new interface driver uas
[    1.975097] scsi 6:0:0:0: Direct-Access     LDLC F6+ M.2 480          0204 PQ: 0 ANSI: 6
[    1.975695] sr 1:0:0:0: [sr0] scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray
[    1.975697] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.975927] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    1.977476] sd 6:0:0:0: [sdb] 937703088 512-byte logical blocks: (480 GB/447 GiB)
[    1.977478] sd 6:0:0:0: [sdb] 4096-byte physical blocks
[    1.977844] sd 6:0:0:0: [sdb] Write Protect is off
[    1.977846] sd 6:0:0:0: [sdb] Mode Sense: 5f 00 00 08
[    1.978345] sd 6:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.978720] sd 6:0:0:0: [sdb] Optimal transfer size 33553920 bytes not a multiple of physical block size (4096 bytes)
[    1.981485]  sdb: sdb1
[    1.985970] sd 6:0:0:0: [sdb] Attached SCSI disk
[    2.466043] PM: Image not found (code -22)
[    2.617804] cryptd: max_cpu_qlen set to 1000
[    2.781745] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[    4.374670] random: crng init done
[    5.173634] systemd[1]: Inserted module 'autofs4'
[    5.347576] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[    5.366174] systemd[1]: Detected architecture x86-64.
[    5.570947] systemd[1]: Set hostname to <centonze.noho.st>.
[    9.248128] systemd[1]: /etc/systemd/system/matrix-synapse.service:13: RuntimeDirectory= path is not normalized, ignoring: 
[    9.383392] systemd[1]: /lib/systemd/system/fail2ban.service:12: PIDFile= references path below legacy directory /var/run/, updating /var/run/fail2ban/fail2ban.pid → /run/fail2ban/fail2ban.pid; please update the unit file accordingly.
[    9.394918] systemd[1]: /lib/systemd/system/dovecot.service:9: PIDFile= references path below legacy directory /var/run/, updating /var/run/dovecot/master.pid → /run/dovecot/master.pid; please update the unit file accordingly.
[    9.459127] systemd[1]: /etc/systemd/system/coturn-synapse.service:10: PIDFile= references path below legacy directory /var/run/, updating /var/run/coturn-synapse/turnserver.pid → /run/coturn-synapse/turnserver.pid; please update the unit file accordingly.
[    9.701538] systemd[1]: Listening on Journal Audit Socket.
[    9.702755] systemd[1]: Created slice system-postgresql.slice.
[    9.702983] systemd[1]: Created slice system-getty.slice.
[   10.053583] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro
[   10.459993] systemd[1]: Started Journal Service.
[   10.713464] systemd-journald[218]: Received request to flush runtime journal from PID 1
[   10.999596] Adding 1048572k swap on /swap_flarum.  Priority:-2 extents:9 across:1662972k FS
[   12.110231] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/PNP0C0C:00/input/input0
[   12.110250] ACPI: Power Button [PWRB]
[   12.110295] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[   12.110303] ACPI: Power Button [PWRF]
[   12.373520] iTCO_vendor_support: vendor-support=0
[   12.375747] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[   12.375787] iTCO_wdt: Found a ICH10DO TCO device (Version=2, TCOBASE=0x1060)
[   12.375874] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   12.428583] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   12.428623] sr 1:0:0:0: Attached scsi generic sg1 type 5
[   12.428655] sd 6:0:0:0: Attached scsi generic sg2 type 0
[   12.620381] input: PC Speaker as /devices/platform/pcspkr/input/input2
[   13.056221] tpm_tis 00:05: 1.2 TPM (device-id 0xFE, rev-id 70)
[   13.065738] tpm tpm0: TPM is disabled/deactivated (0x6)
[   13.082555] pci 0000:00:00.0: Intel Q45/Q43 Chipset
[   13.082569] pci 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[   13.083697] pci 0000:00:00.0: detected 131072K stolen memory
[   13.083772] [drm] Replacing VGA console driver
[   13.087750] Console: switching to colour dummy device 80x25
[   13.088603] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   13.088603] [drm] Driver supports precise vblank timestamp query.
[   13.090080] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[   13.095652] [drm] RC6 disabled, disabling runtime PM support
[   13.096090] [drm] Initialized i915 1.6.0 20180719 for 0000:00:02.0 on minor 0
[   13.096206] ACPI: Video Device [IGD0] (multi-head: yes  rom: no  post: no)
[   13.096314] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:00/input/input3
[   13.121567] [drm] Cannot find any crtc or sizes
[   13.138580] [drm] Cannot find any crtc or sizes
[   13.216746] intel_powerclamp: No package C-state available
[   13.246467] intel_powerclamp: No package C-state available
[   13.248191] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[   13.394951] Adding 999420k swap on /dev/sda5.  Priority:-3 extents:1 across:999420k FS
[   13.961258] snd_hda_codec_analog hdaudioC0D2: autoconfig for AD1882: line_outs=1 (0x12/0x0/0x0/0x0/0x0) type:line
[   13.961261] snd_hda_codec_analog hdaudioC0D2:    speaker_outs=1 (0x13/0x0/0x0/0x0/0x0)
[   13.961262] snd_hda_codec_analog hdaudioC0D2:    hp_outs=1 (0x11/0x0/0x0/0x0/0x0)
[   13.961264] snd_hda_codec_analog hdaudioC0D2:    mono: mono_out=0x0
[   13.961265] snd_hda_codec_analog hdaudioC0D2:    inputs:
[   13.961266] snd_hda_codec_analog hdaudioC0D2:      Front Mic=0x14
[   13.961268] snd_hda_codec_analog hdaudioC0D2:      Rear Mic=0x17
[   13.961269] snd_hda_codec_analog hdaudioC0D2:      Line=0x15
[   13.961270] snd_hda_codec_analog hdaudioC0D2:      CD=0x18
[   13.971944] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input4
[   13.973198] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
[   13.974577] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[   13.974633] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[   13.974685] input: HDA Intel Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[   13.974735] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[   14.120823] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[   15.050971] audit: type=1400 audit(1603109085.312:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=368 comm="apparmor_parser"
[   15.050974] audit: type=1400 audit(1603109085.312:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=368 comm="apparmor_parser"
[   15.051647] audit: type=1400 audit(1603109085.312:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=367 comm="apparmor_parser"
[   15.051649] audit: type=1400 audit(1603109085.312:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=367 comm="apparmor_parser"
[   15.051651] audit: type=1400 audit(1603109085.312:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=367 comm="apparmor_parser"
[   15.136752] audit: type=1400 audit(1603109085.396:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/haveged" pid=370 comm="apparmor_parser"
[   15.195673] audit: type=1400 audit(1603109085.456:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/postsrsd" pid=369 comm="apparmor_parser"
[   15.216576] audit: type=1400 audit(1603109085.476:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ntpd" pid=371 comm="apparmor_parser"
[   17.882296] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[   20.962993] e1000e: enp0s25 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[   20.963138] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready
[   30.250369] sctp: Hash tables configured (bind 256/256)
[  778.184162] perf: interrupt took too long (2507 > 2500), lowering kernel.perf_event_max_sample_rate to 79750
[ 1478.867326] perf: interrupt took too long (3137 > 3133), lowering kernel.perf_event_max_sample_rate to 63750
[ 7023.088775] device-mapper: uevent: version 1.0.3
[ 7023.089177] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com
[ 7031.378947] SGI XFS with ACLs, security attributes, realtime, no debug enabled
[ 7031.473227] JFS: nTxBlock = 8192, nTxLock = 65536
[ 7031.622743] QNX4 filesystem 0.2.3 registered.
[ 7031.762108] raid6: sse2x1   gen()  4876 MB/s
[ 7031.830103] raid6: sse2x1   xor()  5011 MB/s
[ 7031.898109] raid6: sse2x2   gen()  5646 MB/s
[ 7031.966102] raid6: sse2x2   xor()  6050 MB/s
[ 7032.034102] raid6: sse2x4   gen()  9071 MB/s
[ 7032.102102] raid6: sse2x4   xor()  6732 MB/s
[ 7032.102103] raid6: using algorithm sse2x4 gen() 9071 MB/s
[ 7032.102104] raid6: .... xor() 6732 MB/s, rmw enabled
[ 7032.102105] raid6: using ssse3x2 recovery algorithm
[ 7032.121761] xor: measuring software checksum speed
[ 7032.158098]    prefetch64-sse: 12267.000 MB/sec
[ 7032.198098]    generic_sse: 10852.000 MB/sec
[ 7032.198098] xor: using function: prefetch64-sse (12267.000 MB/sec)
[ 7032.451003] Btrfs loaded, crc32c=crc32c-generic
[ 7032.494242] fuse init (API version 7.27)
[167278.322828] floppy0: unexpected interrupt 
[167278.322875] floppy0: sensei repl[0]=80 
[503611.544073] perf: interrupt took too long (3932 > 3921), lowering kernel.perf_event_max_sample_rate to 50750
17

Mes backups sont tous nickels, mais aucun test SMART n’arrive au bout. Les lenteurs sont de pire en pire et le DD ne s’arrête jamais de faire du boucan comme s’il était en permanence sollicité… Je vais migrer tout sur un autre DD et on verra bien.

Si en attendant quelqu’un pense à un autre truc à tester je suis toujours preneur !

18

Dans le doute j’ai mis un petit coup de htop, je trouve qu’il y a énormément de threads sql. C’est peut être normal j’en sais rien, mais ça pourrait expliquer cette activité incessante du disque non ?

htop
htop1910×1031 263 KB

19

Si tu soupçonnes une faille ou un soucis sur une app, tu peux essayer de désactiver chaque app séparément et observer.

20

Désactiver une app tu veux dire la désinstaller ou y’a une fonction exprès ?

À vrai dire, le fait que l’interface admin soit aussi foireuse je soupçonne un truc qui ait mal vécu la migration vers YNH4… Mais j’ai toujours lu que réinstaller tout c’était le mal absolu alors j’essaie de dépanner avant :smiley: