# Support of Raspberry Pi 5 B

**URL:** https://forum.yunohost.org/t/support-of-raspberry-pi-5-b/31081
**Category:** Support
**Tags:** install, english
**Created:** [September 10, 2024, 7:52pm UTC](https://forum.yunohost.org/t/support-of-raspberry-pi-5-b/31081 "2024-09-10T19:52:13Z")
**Posts on this page:** 4
**Page:** 1

<div class="post-metadata">

### Author: ![Rpi\_5\_user](https://forum.yunohost.org/letter_avatar_proxy/v4/letter/r/e480ec/32.png) [@Rpi\_5\_user](https://forum.yunohost.org/u/Rpi_5_user)
#### Post date: [September 10, 2024, 7:52pm UTC](https://forum.yunohost.org/t/support-of-raspberry-pi-5-b/31081/1 "2024-09-10T19:52:13Z")

</div>

### My YunoHost server

**Hardware:** Raspberry Pi 5 B  
**YunoHost version:** 11.2.8 & 12  
**I have access to my server :** through a screen  
**Are you in a special context or did you perform some particular tweaking on your YunoHost instance ?** : yes  
**If yes, please explain:** trying to use YunoHost on a non-officially supported device

### Description of my issue

Hello everyone! I just bought a brand new Raspberry Pi 5 B, hoping to launch Yunohost on it. But now it’s not working at all :

`bios message : the installed OS does not indicate support for Raspberry Pi 5`  
`Update the OS or set os_check=0 in config.txt to skip this check`

So I put the `os_check=0` as asked and then the Raspberry pi boot to something (because I don’t see the bios anymore) but the screen is fully black. And so it’s not working).

when I try the beta that supports Bookworm, the OS isn’t even detected by the bios. (I install it via Balena Etcher on a 1tb microSD card) Do you know what can I do to solve this problem ? Thank you a lot \<3

---

<div class="post-metadata">

### Author: ![tituspijean](https://forum.yunohost.org/user_avatar/forum.yunohost.org/tituspijean/32/3584_2.png) [@tituspijean](https://forum.yunohost.org/u/tituspijean)
#### Post date: [September 10, 2024, 9:38pm UTC](https://forum.yunohost.org/t/support-of-raspberry-pi-5-b/31081/2 "2024-09-10T21:38:45Z")

</div>

Welcome!

Raspberry Pi 5 is unfortunately [not compatible](https://www.raspberrypi.com/software/operating-systems/#raspberry-pi-os-legacy-64-bit) with Debian 11, on which YunoHost 11 is based.

However I see you tried YunoHost 12 too, but there is currently no built image for it. Can you try installing Debian 12 with its image, then follow the [`curl | bash` method](https://forum.yunohost.org/t/beta-stage-testing-for-yunohost-12-0-bookworm-and-bullseye-bookworm-migration/30496#p-138583-inbox_tray-installing-a-fresh-yunohost-on-top-of-a-fresh-debian-12bookworm-7)?

---

<div class="post-metadata">

### Author: ![Rpi\_5\_user](https://forum.yunohost.org/letter_avatar_proxy/v4/letter/r/e480ec/32.png) [@Rpi\_5\_user](https://forum.yunohost.org/u/Rpi_5_user)
#### Post date: [September 14, 2024, 4:56pm UTC](https://forum.yunohost.org/t/support-of-raspberry-pi-5-b/31081/3 "2024-09-14T16:56:25Z")

</div>

Thank you really much!

I installed the Raspberry Pi OS based on Debian 12 bookworm, then install Yunohost with the `curl` method. Everything goes well, but I had one problem :

I installed Yunohost a first time, then config a local server, then a \*.nohost.me. I had config problem with debian, so I reinstalled the OS. When I installed Yunohost back, it was impossible to connect to the \*.nohost.me server in the postinstall steps.  
I had to create a local one, the connect to the \*.nohost.me.

Is it an intended behavior?

In every case, thank you a lot!

---

<div class="post-metadata">

### Author: ![system](https://forum.yunohost.org/uploads/default/original/2X/f/f59fe8e3ee6b100b4f574d30d6e30479c68b89f0.png) [@system](https://forum.yunohost.org/u/system)
#### Post date: [October 14, 2024, 4:56pm UTC](https://forum.yunohost.org/t/support-of-raspberry-pi-5-b/31081/4 "2024-10-14T16:56:57Z")

</div>

This topic was automatically closed 30 days after the last reply. New replies are no longer allowed.