# Raspberry 1 B, grave problemes d'installation **URL:** https://forum.yunohost.org/t/raspberry-1-b-grave-problemes-dinstallation/6026 **Category:** Support **Tags:** raspberrypi, french **Created:** [October 20, 2018, 4:33pm UTC](https://forum.yunohost.org/t/raspberry-1-b-grave-problemes-dinstallation/6026 "2018-10-20T16:33:31Z") **Posts on this page:** 20 **Page:** 1
### Author: ![jean](https://forum.yunohost.org/letter_avatar_proxy/v4/letter/j/fbc32d/32.png) [@jean](https://forum.yunohost.org/u/jean) #### Post date: [October 20, 2018, 4:33pm UTC](https://forum.yunohost.org/t/raspberry-1-b-grave-problemes-dinstallation/6026/1 "2018-10-20T16:33:31Z")
bonjour, je rencontre de gros problèmes lors de l’installation de Yunohost sur une raspberry modèle B. j’ai essayé le méthode recommandée mais cette version stable apparaît déjà avec des erreurs: les locales ne sont pas bonnes, metronome (je ne sais pas ce que c’est) ne fonctionne pas, l’accès via l’interface web me renvoie tellement d’erreurs, des créations de comptes admin inexistantes et du coup, impossible d’installer la moindre apps et le système plante car il n’est pas bien installé lui aussi. J’ai donc essayé manuellement à partir d’une installation propre de raspbian stretch et là aussi, c’est pareil, le système ne termine pas son installation et échoue. voici les logs > ``` > 1. [e[1me[34mINFOe[0m] Running upgrade_system > 2. Atteint:1 http://archive.raspberrypi.org/debian stretch InRelease > 3. Atteint:2 http://raspbian.raspberrypi.org/raspbian stretch InRelease > 25. [e[1me[34mINFOe[0m] Running install_script_dependencies > 26. Atteint:1 http://raspbian.raspberrypi.org/raspbian stretch InRelease > 27. Atteint:2 http://archive.raspberrypi.org/debian stretch InRelease > 28. Lecture des listes de paquets… > 29. Lecture des listes de paquets… > 30. Construction de l'arbre des dépendances… > 31. Lecture des informations d'état… > 32. apt-transport-https is already the newest version (1.4.8). > 33. dialog is already the newest version (1.3-20160828-2). > 34. gnupg is already the newest version (2.1.18-8~deb9u2). > 35. lsb-release is already the newest version (9.20161125+rpi1). > 36. lsb-release passé en « installé manuellement ». > 37. wget is already the newest version (1.18-5+deb9u2). > 38. whiptail is already the newest version (0.52.19-1). > 39. 0 mis à jour, 0 nouvellement installés, 0 à enlever et 0 non mis à jour. > 40. [e[1me[34mINFOe[0m] Running create_custom_config > 41. [e[1me[34mINFOe[0m] Running confirm_installation > 42. [e[1me[34mINFOe[0m] Running fix_locales > 43. [e[1me[34mINFOe[0m] Running setup_package_source > 44. [e[1me[34mINFOe[0m] Running apt_update > 45. Hit:1 http://raspbian.raspberrypi.org/raspbian stretch InRelease > 46. Hit:2 http://archive.raspberrypi.org/debian stretch InRelease > 47. Get:3 http://forge.yunohost.org/debian stretch InRelease [18.2 kB] > 48. Get:4 http://forge.yunohost.org/debian stretch/stable armhf Packages [4314 B] > 50. Reading package lists... > 51. [e[1me[34mINFOe[0m] Running register_debconf > 52. [e[1me[34mINFOe[0m] Running workaround_avahi_installation > 53. [e[1me[34mINFOe[0m] User avahi already exists (with uid uid=108(avahi) gid=112(avahi) groups=112(avahi)), skipping avahi workaround > 54. [e[1me[34mINFOe[0m] Running install_yunohost_packages > 235. After this operation, 456 MB of additional disk space will be used. > **563. apt-listchanges: Can't set locale; make sure $LC_* and $LANG are correct!** > 564. perl: warning: Setting locale failed. > 565. perl: warning: Please check that your locale settings: > 566. LANGUAGE = (unset), > 567. LC_ALL = "en_US.UTF-8", > 568. LANG = "fr_FR.UTF-8" > 569. are supported and installed on your system. > 570. perl: warning: Falling back to a fallback locale ("fr_FR.UTF-8"). > 571. locale: Cannot set LC_CTYPE to default locale: No such file or directory > 572. locale: Cannot set LC_MESSAGES to default locale: No such file or directory > 573. locale: Cannot set LC_ALL to default locale: No such file or directory > 1613. Adding 'diversion of /usr/lib/gnupg1/gpgkeys_curl to /usr/lib/gnupg1/gpgkeys_curl.non_curl by gnupg1-curl' > 1614. Adding 'diversion of /usr/lib/gnupg1/gpgkeys_hkp to /usr/lib/gnupg1/gpgkeys_hkp.non_curl by gnupg1-curl' > 1679. Selecting previously unselected package yunohost. > 1680. Preparing to unpack .../297-yunohost_3.2.2_all.deb ... > 1681. Unpacking yunohost (3.2.2) ... > 1682. Selecting previously unselected package yunohost-admin. > 1683. Preparing to unpack .../298-yunohost-admin_3.2.1_all.deb ... > 1684. Unpacking yunohost-admin (3.2.1) ... > 1685. Setting up python-dnspython (1.15.0-1) ... > 1686. Setting up bind9utils (1:9.10.3.dfsg.P4-12.3+deb9u4) ... > 1687. Setting up libhtml-tagset-perl (3.20-3) ... > 1688. Setting up python-idna (2.2-1) ... > 1689. Setting up libhiredis0.13:armhf (0.13.3-2) ... > 1690. Setting up libjs-jquery (3.1.1-2) ... > 1691. Setting up python-pip-whl (9.0.1-2+rpt2) ... > 1692. Setting up fail2ban (0.9.6-2) ... > 1693. Created symlink /etc/systemd/system/multi-user.target.wants/fail2ban.service → /lib/systemd/system/fail2ban.service. > 1694. Setting up lua-socket:armhf (3.0~rc1+git+ac3201d-3) ... > 1695. Setting up procmail (3.22-25+deb9u1) ... > 1696. Setting up libunbound2:armhf (1.6.0-3) ... > 1697. Setting up libfont-afm-perl (1.20-2) ... > 1698. Setting up python-crypto (2.6.1-7) ... > 1699. Setting up hddtemp (0.3-beta15-52) ... > 1700. locale: Cannot set LC_CTYPE to default locale: No such file or directory > 1701. locale: Cannot set LC_MESSAGES to default locale: No such file or directory > 1702. locale: Cannot set LC_ALL to default locale: No such file or directory > 1703. Setting up libarchive-zip-perl (1.59-1+deb9u1) ... > 1704. Setting up lua-ldap:armhf (1.1.0-1-geeac494-6) ... > 1705. Setting up libnss-myhostname:armhf (232-25+deb9u4) ... > 1706. First installation detected... > 1707. Checking NSS setup... > 1708. Setting up libencode-locale-perl (1.05-1) ... > 1709. Setting up libjemalloc1 (3.6.0-9.1) ... > 1710. Setting up lua-rex-pcre:armhf (2.7.2-4) ... > 1711. Setting up libtimedate-perl (2.3000-2) ... > 1712. Setting up liblcms2-2:armhf (2.8-4+deb9u1) ... > 1713. Setting up libnet-ip-perl (1.26-1) ... > 1714. Setting up libjbig0:armhf (2.1-3.1) ... > 1715. Setting up libopendkim11 (2.11.0~alpha-10+deb9u1) ... > 1716. Setting up fonts-dejavu-core (2.37-1) ... > 1717. Setting up python3-crypto (2.6.1-7) ... > 1718. Processing triggers for install-info (6.3.0.dfsg.1-1+b1) ... > 1719. Setting up postsrsd (1.4-1) ... > 1720. locale: Cannot set LC_CTYPE to default locale: No such file or directory > 1721. locale: Cannot set LC_MESSAGES to default locale: No such file or directory > 1722. locale: Cannot set LC_ALL to default locale: No such file or directory > **1723. postconf: fatal: open /etc/postfix/main.cf: No such file or directory** > 1724. postsrsd: Generating initial /etc/postsrsd.secret > 1725. groupadd: nscd did not terminate normally (signal 11) > 1726. groupadd: nscd did not terminate normally (signal 11) > 1727. groupadd: nscd did not terminate normally (signal 11) > 1728. useradd: nscd did not terminate normally (signal 11) > 1729. useradd: nscd did not terminate normally (signal 11) > 1730. useradd: nscd did not terminate normally (signal 11) > 1731. useradd: nscd did not terminate normally (signal 11) > 1732. usermod: nscd did not terminate normally (signal 11) > 1733. usermod: nscd did not terminate normally (signal 11) > 1734. usermod: nscd did not terminate normally (signal 11) > 1735. usermod: nscd did not terminate normally (signal 11) > 1736. chage: nscd did not terminate normally (signal 11) > 1737. chage: nscd did not terminate normally (signal 11) > 1738. Created symlink /etc/systemd/system/multi-user.target.wants/postsrsd.service → /lib/systemd/system/postsrsd.service. > 1739. Setting up libdbus-glib-1-2:armhf (0.108-2) ... > 1740. Setting up lua-zlib:armhf (0.2+git+1+9622739-2) ... > 1741. Setting up perl-openssl-defaults:armhf (3) ... > 1742. Setting up libblas-common (3.7.0-2) ... > 1743. Setting up socat (1.7.3.1-2+deb9u1) ... > 1744. Setting up lua-sec:armhf (0.6-3) ... > 1745. Setting up lsof (4.89+dfsg-0.1) ... > 1746. Setting up python-pyasn1 (0.1.9-2) ... > 1747. Setting up libgfortran3:armhf (6.3.0-18+rpi1+deb9u1) ... > 1748. Setting up nginx-common (1.10.3-1+deb9u1) ... > 1749. locale: Cannot set LC_CTYPE to default locale: No such file or directory > 1750. locale: Cannot set LC_MESSAGES to default locale: No such file or directory > 1751. locale: Cannot set LC_ALL to default locale: No such file or directory > 1752. Created symlink /etc/systemd/system/multi-user.target.wants/nginx.service → /lib/systemd/system/nginx.service. > 1753. Setting up iproute (1:4.9.0-1+deb9u1) ... > 1754. Setting up libio-html-perl (1.001-1) ... > 1755. Setting up libnginx-mod-http-subs-filter (1.10.3-1+deb9u1) ... > 1756. Setting up libonig4:armhf (6.1.3-2) ... > 1757. Setting up python-wheel (0.29.0-2) ... > 1758. Setting up dns-root-data (2017072601~deb9u1) ... > 1759. Setting up python3-pyparsing (2.1.10+dfsg1-1) ... > 1760. Setting up whois (5.2.17~deb9u1) ... > 1761. Setting up lua-filesystem:armhf (1.6.3-1) ... > 1762. Setting up libgc1c2:armhf (1:7.4.2-8) ... > 1763. Setting up python3-cycler (0.10.0-1) ... > 1764. Setting up python3-bottle (0.12.13-1) ... > 1765. Setting up libtiff5:armhf (4.0.8-2+deb9u2) ... > 1766. Setting up libnginx-mod-http-cache-purge (1.10.3-1+deb9u1) ... > 1767. Setting up ssl-cert (1.0.39) ... > 1768. locale: Cannot set LC_CTYPE to default locale: No such file or directory > 1769. locale: Cannot set LC_MESSAGES to default locale: No such file or directory > 1770. locale: Cannot set LC_ALL to default locale: No such file or directory > 1771. groupadd: nscd did not terminate normally (signal 11) > 1772. groupadd: nscd did not terminate normally (signal 11) > 1773. groupadd: nscd did not terminate normally (signal 11) > 1774. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 1807. update-alternatives: using /usr/lib/libblas/libblas.so.3 to provide /usr/lib/libblas.so.3 (libblas.so.3) in auto mode > 1808. Setting up python-six (1.10.0-3) ... > 1809. Setting up gir1.2-glib-2.0:armhf (1.50.0-1) ... > 1810. Setting up python-miniupnpc (1.9.20140610-4) ... > 1811. Setting up lua-expat:armhf (1.3.0-4) ... > 1812. Setting up liblwp-mediatypes-perl (6.02-1) ... > 1813. Setting up libunwind8 (1.1-4.1) ... > 1814. Setting up libmail-sendmail-perl (0.79.16-2) ... > 1815. Processing triggers for libc-bin (2.24-11+deb9u3) ... > 1816. Setting up libaio1:armhf (0.3.110-3) ... > 1817. Setting up libsocket6-perl (0.27-1+b1) ... > 1818. Setting up galera-3 (25.3.19-2+rpi1) ... > 1819. Setting up autotools-dev (20161112.1) ... > 1820. Setting up python-psutil (5.0.1-1) ... > 1821. Setting up librbl1 (2.11.0~alpha-10+deb9u1) ... > 1822. Setting up python3-pysnmp4 (4.3.2-2) ... > 1823. Setting up liburi-perl (1.71-1) ... > 1824. Setting up lua-event:armhf (0.4.3-2) ... > 1825. Setting up python3-systemd (233-1) ... > 1826. Setting up libnginx-mod-nchan (1.10.3-1+deb9u1) ... > 1827. Setting up libexttextcat-data (3.4.4-2) ... > 1828. Setting up php-common (1:49) ... > 1829. Created symlink /etc/systemd/system/timers.target.wants/phpsessionclean.timer → /lib/systemd/system/phpsessionclean.timer. > 1830. Setting up libjs-jquery-ui (1.12.1+dfsg-4) ... > 1831. Setting up libopendbx1 (1.4.6-11) ... > 1832. Setting up python-enum34 (1.1.6-1) ... > 1833. Processing triggers for systemd (232-25+deb9u4) ... > 1834. Setting up unscd (0.53-1+yunohost) ... > 1835. Ajout du groupe « unscd » (GID 116)... > 1836. groupadd: nscd did not terminate normally (signal 11) > 1837. groupadd: nscd did not terminate normally (signal 11) > 1838. groupadd: nscd did not terminate normally (signal 11) > 1839. Fait. > 1840. useradd: nscd did not terminate normally (signal 11) > 1841. useradd: nscd did not terminate normally (signal 11) > 1842. useradd: nscd did not terminate normally (signal 11) > 1843. useradd: nscd did not terminate normally (signal 11) > 1844. usermod: nscd did not terminate normally (signal 11) > 1845. usermod: nscd did not terminate normally (signal 11) > 1846. usermod: nscd did not terminate normally (signal 11) > 1847. usermod: nscd did not terminate normally (signal 11) > 1848. chage: nscd did not terminate normally (signal 11) > 1849. chage: nscd did not terminate normally (signal 11) > 1850. Created symlink /etc/systemd/system/multi-user.target.wants/unscd.service → /lib/systemd/system/unscd.service. > 1851. Setting up libltdl7:armhf (2.4.6-2) ... > 1852. Setting up libhtml-parser-perl (3.72-3) ... > 1853. Setting up libpython2.7:armhf (2.7.13-2+deb9u3) ... > 1854. Setting up libnginx-mod-http-auth-pam (1.10.3-1+deb9u1) ... > 1855. Setting up libluajit-5.1-2:armhf (2.0.4+dfsg-1) ... > 1856. Setting up libcgi-pm-perl (4.35-1) ... > 1857. Setting up libopts25:armhf (1:5.18.12-3) ... > 1858. Setting up sudo-ldap (1.8.19p1-2.1) ... > 1859. Setting up unattended-upgrades (0.93.1+nmu1) ... > 1860. locale: Cannot set LC_CTYPE to default locale: No such file or directory > 1861. locale: Cannot set LC_MESSAGES to default locale: No such file or directory > 1862. locale: Cannot set LC_ALL to default locale: No such file or directory > 1863. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > > 1864. Creating config file /etc/apt/apt.conf.d/20auto-upgrades with new version > 1865. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 1866. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > > 1867. Creating config file /etc/apt/apt.conf.d/50unattended-upgrades with new version > 1868. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 1869. Created symlink /etc/systemd/system/multi-user.target.wants/unattended-upgrades.service → /lib/systemd/system/unattended-upgrades.service. > 1870. Synchronizing state of unattended-upgrades.service with SysV service script with /lib/systemd/systemd-sysv-install. > 1871. Executing: /lib/systemd/systemd-sysv-install enable unattended-upgrades > 1872. Setting up libnginx-mod-http-dav-ext (1.10.3-1+deb9u1) ... > 1873. Setting up libdigest-hmac-perl (1.03+dfsg-1) ... > 1874. Setting up libnginx-mod-mail (1.10.3-1+deb9u1) ... > 1875. Setting up nslcd (0.9.7-2+deb9u1) ... > 1876. locale: Cannot set LC_CTYPE to default locale: No such file or directory > 1877. locale: Cannot set LC_MESSAGES to default locale: No such file or directory > 1878. locale: Cannot set LC_ALL to default locale: No such file or directory > 1879. Attention ! Impossible d'accéder au répertoire personnel que vous avez indiqué (/var/run/nslcd/) : No such file or directory. > 1880. Ajout de l'utilisateur système « nslcd » (UID 112) ... > 1881. Ajout du nouveau groupe « nslcd » (GID 117) ... > 1882. groupadd: nscd did not terminate normally (signal 11) > 1883. groupadd: nscd did not terminate normally (signal 11) > 1884. groupadd: nscd did not terminate normally (signal 11) > 1885. Ajout du nouvel utilisateur « nslcd » (UID 112) avec pour groupe d'appartenance « nslcd » ... > 1886. useradd: nscd did not terminate normally (signal 11) > 1887. useradd: nscd did not terminate normally (signal 11) > 1888. useradd: nscd did not terminate normally (signal 11) > 1889. useradd: nscd did not terminate normally (signal 11) > 1890. usermod: nscd did not terminate normally (signal 11) > 1891. usermod: nscd did not terminate normally (signal 11) > 1892. usermod: nscd did not terminate normally (signal 11) > 1893. usermod: nscd did not terminate normally (signal 11) > 1894. chage: nscd did not terminate normally (signal 11) > 1895. chage: nscd did not terminate normally (signal 11) > 1896. chfn: nscd did not terminate normally (signal 11) > 1897. chfn: nscd did not terminate normally (signal 11) > 1898. chfn: nscd did not terminate normally (signal 11) > **1899. Le répertoire personnel « /var/run/nslcd/ » n'a pas été créé**. > 1900. Setting up libfribidi0:armhf (0.19.7-1) ... > 1901. Setting up libxpm4:armhf (1:3.5.12-1) ... > 1902. Setting up dnsmasq-base (2.76-5+rpt1+deb9u1) ... > 1903. useradd: nscd did not terminate normally (signal 11) > 1904. useradd: nscd did not terminate normally (signal 11) > 1905. useradd: nscd did not terminate normally (signal 11) > 1906. useradd: nscd did not terminate normally (signal 11) > 1907. usermod: nscd did not terminate normally (signal 11) > 1908. usermod: nscd did not terminate normally (signal 11) > 1909. usermod: nscd did not terminate normally (signal 11) > 1910. usermod: nscd did not terminate normally (signal 11) > 1911. chage: nscd did not terminate normally (signal 11) > 1912. chage: nscd did not terminate normally (signal 11) > 1913. chfn: nscd did not terminate normally (signal 11) > 1914. chfn: nscd did not terminate normally (signal 11) > 1915. chfn: nscd did not terminate normally (signal 11) > 1916. Setting up libexpat1-dev:armhf (2.2.0-2+deb9u1) ... > 1917. Setting up ttf-bitstream-vera (1.10-8) ... > 1918. Setting up libxrender1:armhf (1:0.9.10-1) ... > 1919. Setting up python-greenlet (0.4.11-1) ... > 1920. Setting up libsensors4:armhf (1:3.4.0-4) ... > 1921. Processing triggers for man-db (2.7.6.1-2) ... > 1922. Setting up libnet-http-perl (6.12-1) ... > 1923. Setting up libnginx-mod-http-xslt-filter (1.10.3-1+deb9u1) ... > 1924. Setting up python3-websocket (0.37.0-2) ... > 1925. update-alternatives: using /usr/bin/python3-wsdump to provide /usr/bin/wsdump (wsdump) in auto mode > 1926. Setting up libpython2.7-dev:armhf (2.7.13-2+deb9u3) ... > 1927. Setting up python3-pystache (0.5.4-6) ... > 1928. Setting up liblua5.1-0:armhf (5.1.5-8.1) ... > 1929. Setting up libtcl8.6:armhf (8.6.6+dfsg-1) ... > 1930. Setting up libnginx-mod-http-upstream-fair (1.10.3-1+deb9u1) ... > 1931. Setting up javascript-common (11) ... > 1932. Processing triggers for dbus (1.10.26-0+deb9u1) ... > 1933. Setting up php7.0-common (7.0.30-0+deb9u1) ... > 1934. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 1935. locale: Cannot set LC_CTYPE to default locale: No such file or directory > 1936. locale: Cannot set LC_MESSAGES to default locale: No such file or directory > 1937. locale: Cannot set LC_ALL to default locale: No such file or directory > 1938. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 1939. Use of uninitialized value in subroutine entry at /usr/share/perl5/Debconf/Encoding.pm line 68, line 1. > > 1940. Creating config file /etc/php/7.0/mods-available/calendar.ini with new version > 1941. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 1942. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 1943. locale: Cannot set LC_CTYPE to default locale: No such file or directory > 1944. locale: Cannot set LC_MESSAGES to default locale: No such file or directory > 1945. locale: Cannot set LC_ALL to default locale: No such file or directory > 1946. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 1947. Use of uninitialized value in subroutine entry at /usr/share/perl5/Debconf/Encoding.pm line 68, line 1. > > 1948. Creating config file /etc/php/7.0/mods-available/ctype.ini with new version > 1949. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 1950. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 1951. locale: Cannot set LC_CTYPE to default locale: No such file or directory > 1952. locale: Cannot set LC_MESSAGES to default locale: No such file or directory > 1953. locale: Cannot set LC_ALL to default locale: No such file or directory > 1954. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 1955. Use of uninitialized value in subroutine entry at /usr/share/perl5/Debconf/Encoding.pm line 68, line 1. > > 1956. Creating config file /etc/php/7.0/mods-available/exif.ini with new version > 1957. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 1958. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 1959. locale: Cannot set LC_CTYPE to default locale: No such file or directory > 1960. locale: Cannot set LC_MESSAGES to default locale: No such file or directory > 1961. locale: Cannot set LC_ALL to default locale: No such file or directory > 1962. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 1963. Use of uninitialized value in subroutine entry at /usr/share/perl5/Debconf/Encoding.pm line 68, line 1. > > 1964. Creating config file /etc/php/7.0/mods-available/fileinfo.ini with new version > 1965. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 1966. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 1967. locale: Cannot set LC_CTYPE to default locale: No such file or directory > 1968. locale: Cannot set LC_MESSAGES to default locale: No such file or directory > 1969. locale: Cannot set LC_ALL to default locale: No such file or directory > 1970. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 1971. Use of uninitialized value in subroutine entry at /usr/share/perl5/Debconf/Encoding.pm line 68, line 1. > > 1972. Creating config file /etc/php/7.0/mods-available/ftp.ini with new version > 1973. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 1974. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 1975. locale: Cannot set LC_CTYPE to default locale: No such file or directory > 1976. locale: Cannot set LC_MESSAGES to default locale: No such file or directory > 1977. locale: Cannot set LC_ALL to default locale: No such file or directory > 1978. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 1979. Use of uninitialized value in subroutine entry at /usr/share/perl5/Debconf/Encoding.pm line 68, line 1. > > 1980. Creating config file /etc/php/7.0/mods-available/gettext.ini with new version > 1981. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 1982. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 1983. locale: Cannot set LC_CTYPE to default locale: No such file or directory > 1984. locale: Cannot set LC_MESSAGES to default locale: No such file or directory > 1985. locale: Cannot set LC_ALL to default locale: No such file or directory > 1986. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 1987. Use of uninitialized value in subroutine entry at /usr/share/perl5/Debconf/Encoding.pm line 68, line 1. > > 1988. Creating config file /etc/php/7.0/mods-available/iconv.ini with new version > 1989. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 1990. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 1991. locale: Cannot set LC_CTYPE to default locale: No such file or directory > 1992. locale: Cannot set LC_MESSAGES to default locale: No such file or directory > 1993. locale: Cannot set LC_ALL to default locale: No such file or directory > 1994. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 1995. Use of uninitialized value in subroutine entry at /usr/share/perl5/Debconf/Encoding.pm line 68, line 1. > > 1996. Creating config file /etc/php/7.0/mods-available/pdo.ini with new version > 1997. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 1998. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 1999. locale: Cannot set LC_CTYPE to default locale: No such file or directory > 2000. locale: Cannot set LC_MESSAGES to default locale: No such file or directory > 2001. locale: Cannot set LC_ALL to default locale: No such file or directory > 2002. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2003. Use of uninitialized value in subroutine entry at /usr/share/perl5/Debconf/Encoding.pm line 68, line 1. > > 2004. Creating config file /etc/php/7.0/mods-available/phar.ini with new version > 2005. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2006. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2007. locale: Cannot set LC_CTYPE to default locale: No such file or directory > 2008. locale: Cannot set LC_MESSAGES to default locale: No such file or directory > 2009. locale: Cannot set LC_ALL to default locale: No such file or directory > 2010. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2011. Use of uninitialized value in subroutine entry at /usr/share/perl5/Debconf/Encoding.pm line 68, line 1. > > 2012. Creating config file /etc/php/7.0/mods-available/posix.ini with new version > 2013. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2014. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2015. locale: Cannot set LC_CTYPE to default locale: No such file or directory > 2016. locale: Cannot set LC_MESSAGES to default locale: No such file or directory > 2017. locale: Cannot set LC_ALL to default locale: No such file or directory > 2018. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2019. Use of uninitialized value in subroutine entry at /usr/share/perl5/Debconf/Encoding.pm line 68, line 1. > > 2020. Creating config file /etc/php/7.0/mods-available/shmop.ini with new version > 2021. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2022. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2023. locale: Cannot set LC_CTYPE to default locale: No such file or directory > 2024. locale: Cannot set LC_MESSAGES to default locale: No such file or directory > 2025. locale: Cannot set LC_ALL to default locale: No such file or directory > 2026. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2027. Use of uninitialized value in subroutine entry at /usr/share/perl5/Debconf/Encoding.pm line 68, line 1. > > 2028. Creating config file /etc/php/7.0/mods-available/sockets.ini with new version > 2029. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2030. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2031. locale: Cannot set LC_CTYPE to default locale: No such file or directory > 2032. locale: Cannot set LC_MESSAGES to default locale: No such file or directory > 2033. locale: Cannot set LC_ALL to default locale: No such file or directory > 2034. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2035. Use of uninitialized value in subroutine entry at /usr/share/perl5/Debconf/Encoding.pm line 68, line 1. > > 2036. Creating config file /etc/php/7.0/mods-available/sysvmsg.ini with new version > 2037. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2038. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2039. locale: Cannot set LC_CTYPE to default locale: No such file or directory > 2040. locale: Cannot set LC_MESSAGES to default locale: No such file or directory > 2041. locale: Cannot set LC_ALL to default locale: No such file or directory > 2042. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2043. Use of uninitialized value in subroutine entry at /usr/share/perl5/Debconf/Encoding.pm line 68, line 1. > > 2044. Creating config file /etc/php/7.0/mods-available/sysvsem.ini with new version > 2045. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2046. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2047. locale: Cannot set LC_CTYPE to default locale: No such file or directory > 2048. locale: Cannot set LC_MESSAGES to default locale: No such file or directory > 2049. locale: Cannot set LC_ALL to default locale: No such file or directory > 2050. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2051. Use of uninitialized value in subroutine entry at /usr/share/perl5/Debconf/Encoding.pm line 68, line 1. > > 2052. Creating config file /etc/php/7.0/mods-available/sysvshm.ini with new version > 2053. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2054. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2055. locale: Cannot set LC_CTYPE to default locale: No such file or directory > 2056. locale: Cannot set LC_MESSAGES to default locale: No such file or directory > 2057. locale: Cannot set LC_ALL to default locale: No such file or directory > 2058. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2059. Use of uninitialized value in subroutine entry at /usr/share/perl5/Debconf/Encoding.pm line 68, line 1. > > 2060. Creating config file /etc/php/7.0/mods-available/tokenizer.ini with new version > 2061. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2062. Setting up libconvert-asn1-perl (0.27-2) ... > 2063. Setting up libreadline5:armhf (5.2+dfsg-3) ... > 2064. Setting up php7.0-xml (7.0.30-0+deb9u1) ... > 2065. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2066. locale: Cannot set LC_CTYPE to default locale: No such file or directory > 2067. locale: Cannot set LC_MESSAGES to default locale: No such file or directory > 2068. locale: Cannot set LC_ALL to default locale: No such file or directory > 2069. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2070. Use of uninitialized value in subroutine entry at /usr/share/perl5/Debconf/Encoding.pm line 68, line 1. > > 2071. Creating config file /etc/php/7.0/mods-available/dom.ini with new version > 2072. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2073. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2074. locale: Cannot set LC_CTYPE to default locale: No such file or directory > 2075. locale: Cannot set LC_MESSAGES to default locale: No such file or directory > 2076. locale: Cannot set LC_ALL to default locale: No such file or directory > 2077. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2078. Use of uninitialized value in subroutine entry at /usr/share/perl5/Debconf/Encoding.pm line 68, line 1. > > 2079. Creating config file /etc/php/7.0/mods-available/simplexml.ini with new version > 2080. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2081. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2082. locale: Cannot set LC_CTYPE to default locale: No such file or directory > 2083. locale: Cannot set LC_MESSAGES to default locale: No such file or directory > 2084. locale: Cannot set LC_ALL to default locale: No such file or directory > 2085. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2086. Use of uninitialized value in subroutine entry at /usr/share/perl5/Debconf/Encoding.pm line 68, line 1. > > 2087. Creating config file /etc/php/7.0/mods-available/wddx.ini with new version > 2088. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2089. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2090. locale: Cannot set LC_CTYPE to default locale: No such file or directory > 2091. locale: Cannot set LC_MESSAGES to default locale: No such file or directory > 2092. locale: Cannot set LC_ALL to default locale: No such file or directory > 2093. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2094. Use of uninitialized value in subroutine entry at /usr/share/perl5/Debconf/Encoding.pm line 68, line 1. > > 2095. Creating config file /etc/php/7.0/mods-available/xml.ini with new version > 2096. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2097. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2098. locale: Cannot set LC_CTYPE to default locale: No such file or directory > 2099. locale: Cannot set LC_MESSAGES to default locale: No such file or directory > 2100. locale: Cannot set LC_ALL to default locale: No such file or directory > 2101. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2102. Use of uninitialized value in subroutine entry at /usr/share/perl5/Debconf/Encoding.pm line 68, line 1. > > 2103. Creating config file /etc/php/7.0/mods-available/xmlreader.ini with new version > 2104. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2105. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2106. locale: Cannot set LC_CTYPE to default locale: No such file or directory > 2107. locale: Cannot set LC_MESSAGES to default locale: No such file or directory > 2108. locale: Cannot set LC_ALL to default locale: No such file or directory > 2109. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2110. Use of uninitialized value in subroutine entry at /usr/share/perl5/Debconf/Encoding.pm line 68, line 1. > > 2111. Creating config file /etc/php/7.0/mods-available/xmlwriter.ini with new version > 2112. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2113. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2114. locale: Cannot set LC_CTYPE to default locale: No such file or directory > 2115. locale: Cannot set LC_MESSAGES to default locale: No such file or directory > 2116. locale: Cannot set LC_ALL to default locale: No such file or directory > 2117. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2118. Use of uninitialized value in subroutine entry at /usr/share/perl5/Debconf/Encoding.pm line 68, line 1. > > 2119. Creating config file /etc/php/7.0/mods-available/xsl.ini with new version > 2120. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2121. Setting up python-dbus (1.2.4-1) ... > 2122. Remove stale byte-compiled files... > 2123. Setting up postfix-sqlite (3.1.8-0+deb9u1) ... > 2124. grep: /etc/postfix/dynamicmaps.cf: No such file or directory > 2125. Adding sqlite map entry to /etc/postfix/dynamicmaps.cf > 2126. Setting up php7.0-intl (7.0.30-0+deb9u1) ... > 2127. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2128. locale: Cannot set LC_CTYPE to default locale: No such file or directory > 2129. locale: Cannot set LC_MESSAGES to default locale: No such file or directory > 2130. locale: Cannot set LC_ALL to default locale: No such file or directory > 2131. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2132. Use of uninitialized value in subroutine entry at /usr/share/perl5/Debconf/Encoding.pm line 68, line 1. > > 2133. Creating config file /etc/php/7.0/mods-available/intl.ini with new version > 2134. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2135. Setting up x11-common (1:7.7+19) ... > 2136. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2137. locale: Cannot set LC_CTYPE to default locale: No such file or directory > 2138. locale: Cannot set LC_MESSAGES to default locale: No such file or directory > 2139. locale: Cannot set LC_ALL to default locale: No such file or directory > 2140. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2141. update-rc.d: warning: start and stop actions are no longer supported; falling back to defaults > 2142. Setting up python-ipaddress (1.0.17-1) ... > 2143. Setting up python-argcomplete (1.8.1-1) ... > 2144. Setting up dirmngr (2.1.18-8~deb9u2) ... > 2145. Setting up python-pip (9.0.1-2+rpt2) ... > 2146. Setting up php-intl (1:7.0+49) ... > 2147. Setting up python2.7-dev (2.7.13-2+deb9u3) ... > 2148. Setting up libvbr2 (2.11.0~alpha-10+deb9u1) ... > 2149. Setting up python-all (2.7.13-2) ... > 2150. Setting up libfcgi-perl (0.78-2) ... > 2151. Setting up lua-lpeg:armhf (1.0.0-1) ... > 2152. Setting up metronome (3.11.1+yunohost-1) ... > 2153. groupadd: nscd did not terminate normally (signal 11) > 2154. groupadd: nscd did not terminate normally (signal 11) > 2155. groupadd: nscd did not terminate normally (signal 11) > 2156. useradd: nscd did not terminate normally (signal 11) > 2157. useradd: nscd did not terminate normally (signal 11) > 2158. useradd: nscd did not terminate normally (signal 11) > 2159. useradd: nscd did not terminate normally (signal 11) > 2160. usermod: nscd did not terminate normally (signal 11) > 2161. usermod: nscd did not terminate normally (signal 11) > 2162. usermod: nscd did not terminate normally (signal 11) > 2163. usermod: nscd did not terminate normally (signal 11) > 2164. chage: nscd did not terminate normally (signal 11) > 2165. chage: nscd did not terminate normally (signal 11) > 2166. chfn: nscd did not terminate normally (signal 11) > 2167. chfn: nscd did not terminate normally (signal 11) > 2168. chfn: nscd did not terminate normally (signal 11) > 2169. Adding user metronome to group ssl-cert > 2170. gpasswd: nscd did not terminate normally (signal 11) > 2171. gpasswd: nscd did not terminate normally (signal 11) > 2172. gpasswd: nscd did not terminate normally (signal 11) > 2173. Job for metronome.service failed because the control process exited with error code. > 2174. See "systemctl status metronome.service" and "journalctl -xe" for details. > 2175. invoke-rc.d: initscript metronome, action "start" failed. > 2176. e[0;1;31m●e[0m metronome.service - LSB: Metronome XMPP Server > 2177. Loaded: loaded (/etc/init.d/metronome; generated; vendor preset: enabled) > 2178. Active: e[0;1;31mfailede[0m (Result: exit-code) since Sat 2018-10-20 11:21:15 CEST; 224ms ago > 2179. Docs: man:systemd-sysv-generator(8) > 2180. Process: 31250 ExecStart=/etc/init.d/metronome start e[0;1;31m(code=exited, status=1/FAILURE)e[0m > > 2181. Oct 20 11:21:15 YunoHost systemd[1]: Starting LSB: Metronome XMPP Server... > 2182. Oct 20 11:21:15 YunoHost metronome[31250]: Starting Metronome XMPP Server: m…ion > 2183. Oct 20 11:21:15 YunoHost metronome[31250]: failed! > 2184. Oct 20 11:21:15 YunoHost systemd[1]: e[0;1;39mmetronome.service: Control process exi…us=1e[0m > 2185. Oct 20 11:21:15 YunoHost systemd[1]: e[0;1;31mFailed to start LSB: Metronome XMPP Server.e[0m > 2186. Oct 20 11:21:15 YunoHost systemd[1]: e[0;1;39mmetronome.service: Unit entered failed…ate.e[0m > 2187. Oct 20 11:21:15 YunoHost systemd[1]: e[0;1;39mmetronome.service: Failed with result …de'.e[0m > 2188. Hint: Some lines were ellipsized, use -l to show in full. > 2189. dpkg: error processing package metronome (--configure): > 2190. subprocess installed post-installation script returned error exit status 1 > 2191. Setting up libwww-robotrules-perl (6.01-1) ... > 2192. Setting up python3-tz (2016.7-0.3) ... > 2193. Setting up libnginx-mod-http-geoip (1.10.3-1+deb9u1) ... > 2194. Setting up libnginx-mod-http-ndk (1.10.3-1+deb9u1) ... > 2195. Setting up libmcrypt4 (2.5.8-3.3) ... > 2196. Setting up libauthen-sasl-perl (2.1600-1) ... > 2197. Setting up libdbi-perl (1.636-1+b1) ... > 2198. Setting up libpam-ldapd:armhf (0.9.7-2+deb9u1) ... > 2199. locale: Cannot set LC_CTYPE to default locale: No such file or directory > 2200. locale: Cannot set LC_MESSAGES to default locale: No such file or directory > 2201. locale: Cannot set LC_ALL to default locale: No such file or directory > 2202. Setting up python-gnupg (0.3.9-1) ... > 2203. Setting up autopoint (0.19.8.1-2) ... > 2204. Processing triggers for rsyslog (8.24.0-1) ... > 2205. Setting up liblzo2-2:armhf (2.08-1.2) ... > 2206. Setting up python3-pyinotify (0.9.6-1) ... > 2207. Setting up etckeeper (1.18.5-1) ... > 2208. locale: Cannot set LC_CTYPE to default locale: No such file or directory > 2209. locale: Cannot set LC_MESSAGES to default locale: No such file or directory > 2210. locale: Cannot set LC_ALL to default locale: No such file or directory > 2211. Initialized empty Git repository in /etc/.git/ > > **2212.*** Please tell me who you are.** > > 2213. Run > > 2214. git config --global user.email "you@example.com" > 2215. git config --global user.name "Your Name" > > 2216. to set your account's default identity. > 2217. Omit --global to set the identity only in this repository. > > **2218. fatal: unable to auto-detect email address (got 'root@YunoHost.(none)')** > 2219. etckeeper commit failed; run it by hand > 2220. Setting up postfix (3.1.8-0+deb9u1) ... > 2221. locale: Cannot set LC_CTYPE to default locale: No such file or directory > 2222. locale: Cannot set LC_MESSAGES to default locale: No such file or directory > 2223. locale: Cannot set LC_ALL to default locale: No such file or directory > 2224. Created symlink /etc/systemd/system/multi-user.target.wants/postfix.service → /lib/systemd/system/postfix.service. > 2225. Ajout du groupe « postfix » (GID 119)... > 2226. groupadd: nscd did not terminate normally (signal 11) > 2227. groupadd: nscd did not terminate normally (signal 11) > 2228. groupadd: nscd did not terminate normally (signal 11) > 2229. Fait. > 2230. Ajout de l'utilisateur système « postfix » (UID 115) ... > 2231. Ajout du nouvel utilisateur « postfix » (UID 115) avec pour groupe d'appartenance « postfix » ... > 2232. useradd: nscd did not terminate normally (signal 11) > 2233. useradd: nscd did not terminate normally (signal 11) > 2234. useradd: nscd did not terminate normally (signal 11) > 2235. useradd: nscd did not terminate normally (signal 11) > 2236. usermod: nscd did not terminate normally (signal 11) > 2237. usermod: nscd did not terminate normally (signal 11) > 2238. usermod: nscd did not terminate normally (signal 11) > 2239. usermod: nscd did not terminate normally (signal 11) > 2240. chage: nscd did not terminate normally (signal 11) > 2241. chage: nscd did not terminate normally (signal 11) > 2242. Le répertoire personnel « /var/spool/postfix » n'a pas été créé. > 2243. Ajout du groupe « postdrop » (GID 120)... > 2244. groupadd: nscd did not terminate normally (signal 11) > 2245. groupadd: nscd did not terminate normally (signal 11) > 2246. groupadd: nscd did not terminate normally (signal 11) > 2247. Fait. > 2248. setting myhostname: YunoHost > 2249. setting alias maps > 2250. setting alias database > 2251. mailname is not a fully qualified domain name. Not changing /etc/mailname. > 2252. setting destinations: $myhostname, /etc/mailname, YunoHost, localhost.localdomain, localhost > 2253. setting relayhost: > 2254. setting mynetworks: 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128 > 2255. setting mailbox_command > 2256. setting mailbox_size_limit: 0 > 2257. setting recipient_delimiter: + > 2258. setting inet_interfaces: all > 2259. setting inet_protocols: all > 2260. /etc/aliases does not exist, creating it. > 2261. WARNING: /etc/aliases exists, but does not have a root alias. > > 2262. Postfix (main.cf) is now set up with a default configuration. If you need to > 2263. make changes, edit /etc/postfix/main.cf (and others) as needed. To view > 2264. Postfix configuration values, see postconf(1). > > 2265. After modifying main.cf, be sure to run 'service postfix reload'. > > 2266. Running newaliases > 2267. Setting up python3-dateutil (2.5.3-2) ... > 2268. Setting up python-xdg (0.25-4) ... > 2269. Setting up mailutils-common (1:3.1.1-1) ... > 2270. Setting up libnginx-mod-http-perl (1.10.3-1+deb9u1) ... > 2271. dpkg: dependency problems prevent configuration of yunohost: > 2272. yunohost depends on metronome; however: > 2273. Package metronome is not configured yet. > 2274. Package metronome which provides metronome is not configured yet. > > 2275. dpkg: error processing package yunohost (--configure): > 2276. dependency problems - leaving unconfigured > 2277. Setting up fonts-lyx (2.2.2-1) ... > 2278. Setting up python-ldap (2.4.28-0.1) ... > 2279. Setting up libgssapi-perl (0.28-2+b4) ... > 2280. Setting up libwebp6:armhf (0.5.2-1) ... > 2281. Setting up libnginx-mod-http-lua (1.10.3-1+deb9u1) ... > 2282. Setting up libfile-stripnondeterminism-perl (0.034-1) ... > 2283. Setting up libnginx-mod-http-uploadprogress (1.10.3-1+deb9u1) ... > 2284. Setting up php7.0-mysql (7.0.30-0+deb9u1) ... > 2285. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2286. locale: Cannot set LC_CTYPE to default locale: No such file or directory > 2287. locale: Cannot set LC_MESSAGES to default locale: No such file or directory > 2288. locale: Cannot set LC_ALL to default locale: No such file or directory > 2289. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2290. Use of uninitialized value in subroutine entry at /usr/share/perl5/Debconf/Encoding.pm line 68, line 1. > > 2291. Creating config file /etc/php/7.0/mods-available/mysqlnd.ini with new version > 2292. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2293. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2294. locale: Cannot set LC_CTYPE to default locale: No such file or directory > 2295. locale: Cannot set LC_MESSAGES to default locale: No such file or directory > 2296. locale: Cannot set LC_ALL to default locale: No such file or directory > 2297. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2298. Use of uninitialized value in subroutine entry at /usr/share/perl5/Debconf/Encoding.pm line 68, line 1. > > 2299. Creating config file /etc/php/7.0/mods-available/mysqli.ini with new version > 2300. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2301. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2302. locale: Cannot set LC_CTYPE to default locale: No such file or directory > 2303. locale: Cannot set LC_MESSAGES to default locale: No such file or directory > 2304. locale: Cannot set LC_ALL to default locale: No such file or directory > 2305. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2306. Use of uninitialized value in subroutine entry at /usr/share/perl5/Debconf/Encoding.pm line 68, line 1. > > 2307. Creating config file /etc/php/7.0/mods-available/pdo_mysql.ini with new version > 2308. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2309. Setting up libtool (2.4.6-2) ... > 2310. Setting up postfix-pcre (3.1.8-0+deb9u1) ... > 2311. Adding pcre map entry to /etc/postfix/dynamicmaps.cf > 2312. Setting up libgsasl7 (1.8.0-8+b1) ... > 2313. Setting up libpython-dev:armhf (2.7.13-2) ... > 2314. Setting up libnginx-mod-http-fancyindex (1.10.3-1+deb9u1) ... > 2315. Setting up python-setuptools (33.1.1-1) ... > 2316. Setting up python-urllib3 (1.19.1-1) ... > 2317. Setting up python-yaml (3.12-1) ... > 2318. Setting up jq (1.5+dfsg-1.3) ... > 2319. Setting up php7.0-ldap (7.0.30-0+deb9u1) ... > 2320. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2321. locale: Cannot set LC_CTYPE to default locale: No such file or directory > 2322. locale: Cannot set LC_MESSAGES to default locale: No such file or directory > 2323. locale: Cannot set LC_ALL to default locale: No such file or directory > 2324. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2325. Use of uninitialized value in subroutine entry at /usr/share/perl5/Debconf/Encoding.pm line 68, line 1. > > 2326. Creating config file /etc/php/7.0/mods-available/ldap.ini with new version > 2327. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2328. Setting up fontconfig-config (2.11.0-6.7) ... > 2329. locale: Cannot set LC_CTYPE to default locale: No such file or directory > 2330. locale: Cannot set LC_MESSAGES to default locale: No such file or directory > 2331. locale: Cannot set LC_ALL to default locale: No such file or directory > 2332. Setting up libhttp-date-perl (6.02-1) ... > 2333. Setting up php7.0-readline (7.0.30-0+deb9u1) ... > 2334. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2335. locale: Cannot set LC_CTYPE to default locale: No such file or directory > 2336. locale: Cannot set LC_MESSAGES to default locale: No such file or directory > 2337. locale: Cannot set LC_ALL to default locale: No such file or directory > 2338. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2339. Use of uninitialized value in subroutine entry at /usr/share/perl5/Debconf/Encoding.pm line 68, line 1. > > 2340. Creating config file /etc/php/7.0/mods-available/readline.ini with new version > 2341. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2342. Setting up redis-tools (3:3.2.6-3+deb9u1) ... > 2343. Setting up libodbc1:armhf (2.3.4-1) ... > 2344. Setting up php7.0-opcache (7.0.30-0+deb9u1) ... > 2345. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2346. locale: Cannot set LC_CTYPE to default locale: No such file or directory > 2347. locale: Cannot set LC_MESSAGES to default locale: No such file or directory > 2348. locale: Cannot set LC_ALL to default locale: No such file or directory > 2349. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2350. Use of uninitialized value in subroutine entry at /usr/share/perl5/Debconf/Encoding.pm line 68, line 1. > > 2351. Creating config file /etc/php/7.0/mods-available/opcache.ini with new version > 2352. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2353. Setting up python-chardet (2.3.0-2) ... > 2354. Setting up libnginx-mod-stream (1.10.3-1+deb9u1) ... > 2355. Setting up mariadb-server-core-10.1 (10.1.23-9+deb9u1) ... > 2356. Setting up php7.0-mbstring (7.0.30-0+deb9u1) ... > 2357. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2358. locale: Cannot set LC_CTYPE to default locale: No such file or directory > 2359. locale: Cannot set LC_MESSAGES to default locale: No such file or directory > 2360. locale: Cannot set LC_ALL to default locale: No such file or directory > 2361. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2362. Use of uninitialized value in subroutine entry at /usr/share/perl5/Debconf/Encoding.pm line 68, line 1. > > 2363. Creating config file /etc/php/7.0/mods-available/mbstring.ini with new version > 2364. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2365. Setting up python-matplotlib-data (2.0.0+dfsg1-2) ... > 2366. Setting up libhtml-template-perl (2.95-2) ... > 2367. Setting up libltdl-dev:armhf (2.4.6-2) ... > 2368. Setting up libio-socket-inet6-perl (2.72-2) ... > 2369. Setting up python-gevent (1.1.2-1) ... > 2370. Setting up rspamd (1.7.6.1+yunohost) ... > 2371. groupadd: nscd did not terminate normally (signal 11) > 2372. groupadd: nscd did not terminate normally (signal 11) > 2373. groupadd: nscd did not terminate normally (signal 11) > 2374. useradd: nscd did not terminate normally (signal 11) > 2375. useradd: nscd did not terminate normally (signal 11) > 2376. useradd: nscd did not terminate normally (signal 11) > 2377. useradd: nscd did not terminate normally (signal 11) > 2378. chage: nscd did not terminate normally (signal 11) > 2379. chage: nscd did not terminate normally (signal 11) > 2380. chfn: nscd did not terminate normally (signal 11) > 2381. chfn: nscd did not terminate normally (signal 11) > 2382. chfn: nscd did not terminate normally (signal 11) > 2383. Created symlink /etc/systemd/system/multi-user.target.wants/rspamd.service → /lib/systemd/system/rspamd.service. > 2384. Setting up gettext (0.19.8.1-2) ... > 2385. Setting up python-jinja2 (2.8-1) ... > 2386. Setting up libnet-ssleay-perl (1.80-1) ... > 2387. Setting up libarchive13:armhf (3.2.2-2) ... > 2388. Setting up libexttextcat-2.0-0:armhf (3.4.4-2) ... > 2389. Setting up libnginx-mod-http-echo (1.10.3-1+deb9u1) ... > 2390. Setting up mariadb-client-core-10.1 (10.1.23-9+deb9u1) ... > 2391. Setting up python-dev (2.7.13-2) ... > 2392. Setting up lua-json (1.3.3-2) ... > 2393. Setting up libopendbx1-sqlite3 (1.4.6-11) ... > 2394. Setting up gnupg1-curl (1.4.21-4+deb9u1) ... > 2395. Setting up libmemcachedutil2:armhf (1.0.18-4.1) ... > 2396. Setting up liblapack3 (3.7.0-2) ... > 2397. update-alternatives: using /usr/lib/lapack/liblapack.so.3 to provide /usr/lib/liblapack.so.3 (liblapack.so.3) in auto mode > 2398. Setting up libxss1:armhf (1:1.2.2-1) ... > 2399. Setting up libpython-all-dev:armhf (2.7.13-2) ... > 2400. Setting up nslcd-utils (0.9.7-2+deb9u1) ... > 2401. Setting up ntp (1:4.2.8p10+dfsg-3+deb9u2) ... > 2402. groupadd: nscd did not terminate normally (signal 11) > 2403. groupadd: nscd did not terminate normally (signal 11) > 2404. groupadd: nscd did not terminate normally (signal 11) > 2405. useradd: nscd did not terminate normally (signal 11) > 2406. useradd: nscd did not terminate normally (signal 11) > 2407. useradd: nscd did not terminate normally (signal 11) > 2408. useradd: nscd did not terminate normally (signal 11) > 2409. usermod: nscd did not terminate normally (signal 11) > 2410. usermod: nscd did not terminate normally (signal 11) > 2411. usermod: nscd did not terminate normally (signal 11) > 2412. usermod: nscd did not terminate normally (signal 11) > 2413. chage: nscd did not terminate normally (signal 11) > 2414. chage: nscd did not terminate normally (signal 11) > 2415. Setting up libwebpmux2:armhf (0.5.2-1) ... > 2416. Setting up php7.0-mcrypt (7.0.30-0+deb9u1) ... > 2417. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2418. locale: Cannot set LC_CTYPE to default locale: No such file or directory > 2419. locale: Cannot set LC_MESSAGES to default locale: No such file or directory > 2420. locale: Cannot set LC_ALL to default locale: No such file or directory > 2421. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2422. Use of uninitialized value in subroutine entry at /usr/share/perl5/Debconf/Encoding.pm line 68, line 1. > > 2423. Creating config file /etc/php/7.0/mods-available/mcrypt.ini with new version > 2424. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2425. Setting up autoconf (2.69-10) ... > 2426. Setting up libjs-lodash (4.16.6+dfsg-2) ... > 2427. Setting up php7.0-curl (7.0.30-0+deb9u1) ... > 2428. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2429. locale: Cannot set LC_CTYPE to default locale: No such file or directory > 2430. locale: Cannot set LC_MESSAGES to default locale: No such file or directory > 2431. locale: Cannot set LC_ALL to default locale: No such file or directory > 2432. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2433. Use of uninitialized value in subroutine entry at /usr/share/perl5/Debconf/Encoding.pm line 68, line 1. > > 2434. Creating config file /etc/php/7.0/mods-available/curl.ini with new version > 2435. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2436. Setting up libnet-dns-perl (1.07-1) ... > 2437. Setting up libio-socket-ssl-perl (2.044-1) ... > 2438. Setting up php-xml (1:7.0+49) ... > 2439. Setting up libcgi-fast-perl (1:2.12-1) ... > 2440. Setting up libhtml-tree-perl (5.03-2) ... > 2441. Setting up haveged (1.9.1-5+deb9u1) ... > 2442. Created symlink /etc/systemd/system/default.target.wants/haveged.service → /lib/systemd/system/haveged.service. > 2443. Setting up intltool-debian (0.35.0+20060710.4) ... > 2444. Setting up libnss-ldapd:armhf (0.9.7-2+deb9u1) ... > 2445. locale: Cannot set LC_CTYPE to default locale: No such file or directory > 2446. locale: Cannot set LC_MESSAGES to default locale: No such file or directory > 2447. locale: Cannot set LC_ALL to default locale: No such file or directory > 2448. Setting up python-gi (3.22.0-2) ... > 2449. Setting up python3-docker (1.9.0-1) ... > 2450. Setting up php-ldap (1:7.0+49) ... > 2451. Setting up dnsmasq (2.76-5+rpt1+deb9u1) ... > 2452. Created symlink /etc/systemd/system/multi-user.target.wants/dnsmasq.service → /lib/systemd/system/dnsmasq.service. > 2453. Setting up postfix-ldap (3.1.8-0+deb9u1) ... > 2454. Adding ldap map entry to /etc/postfix/dynamicmaps.cf > 2455. Setting up php-mbstring (1:7.0+49) ... > 2456. Setting up python-all-dev (2.7.13-2) ... > 2457. Setting up lm-sensors (1:3.4.0-4) ... > 2458. Created symlink /etc/systemd/system/multi-user.target.wants/lm-sensors.service → /lib/systemd/system/lm-sensors.service. > 2459. Setting up glances (2.7.1.1-2) ... > 2460. groupadd: nscd did not terminate normally (signal 11) > 2461. groupadd: nscd did not terminate normally (signal 11) > 2462. groupadd: nscd did not terminate normally (signal 11) > 2463. Creating system user 'glances'useradd: nscd did not terminate normally (signal 11) > 2464. useradd: nscd did not terminate normally (signal 11) > 2465. useradd: nscd did not terminate normally (signal 11) > 2466. useradd: nscd did not terminate normally (signal 11) > 2467. usermod: nscd did not terminate normally (signal 11) > 2468. usermod: nscd did not terminate normally (signal 11) > 2469. usermod: nscd did not terminate normally (signal 11) > 2470. usermod: nscd did not terminate normally (signal 11) > 2471. chage: nscd did not terminate normally (signal 11) > 2472. chage: nscd did not terminate normally (signal 11) > 2473. . > 2474. Setting up php7.0-json (7.0.30-0+deb9u1) ... > 2475. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2476. locale: Cannot set LC_CTYPE to default locale: No such file or directory > 2477. locale: Cannot set LC_MESSAGES to default locale: No such file or directory > 2478. locale: Cannot set LC_ALL to default locale: No such file or directory > 2479. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2480. Use of uninitialized value in subroutine entry at /usr/share/perl5/Debconf/Encoding.pm line 68, line 1. > > 2481. Creating config file /etc/php/7.0/mods-available/json.ini with new version > 2482. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2483. Setting up guile-2.0-libs:armhf (2.0.13+1-4) ... > 2484. Setting up automake (1:1.15-6) ... > 2485. update-alternatives: using /usr/bin/automake-1.15 to provide /usr/bin/automake (automake) in auto mode > 2486. Setting up python-cryptography (1.7.1-3+b2) ... > 2487. Setting up libmail-spf-perl (2.9.0-4) ... > 2488. Setting up libfile-listing-perl (6.04-1) ... > 2489. Setting up libwebpdemux2:armhf (0.5.2-1) ... > 2490. dpkg: dependency problems prevent configuration of yunohost-admin: > 2491. yunohost-admin depends on yunohost (>= 2.7.6); however: > 2492. Package yunohost is not configured yet. > > 2493. dpkg: error processing package yunohost-admin (--configure): > 2494. dependency problems - leaving unconfigured > 2495. Setting up slapd (2.4.44+dfsg-5+deb9u1) ... > 2496. locale: Cannot set LC_CTYPE to default locale: No such file or directory > 2497. locale: Cannot set LC_MESSAGES to default locale: No such file or directory > 2498. locale: Cannot set LC_ALL to default locale: No such file or directory > 2499. groupadd: nscd did not terminate normally (signal 11) > 2500. groupadd: nscd did not terminate normally (signal 11) > 2501. groupadd: nscd did not terminate normally (signal 11) > 2502. Creating new user openldap... useradd: nscd did not terminate normally (signal 11) > 2503. useradd: nscd did not terminate normally (signal 11) > 2504. useradd: nscd did not terminate normally (signal 11) > 2505. useradd: nscd did not terminate normally (signal 11) > 2506. chage: nscd did not terminate normally (signal 11) > 2507. chage: nscd did not terminate normally (signal 11) > 2508. chfn: nscd did not terminate normally (signal 11) > 2509. chfn: nscd did not terminate normally (signal 11) > 2510. chfn: nscd did not terminate normally (signal 11) > 2511. done. > 2512. Creating initial configuration... done. > 2513. Creating LDAP directory... done. > 2514. Setting up python-requests (2.12.4-1) ... > 2515. Setting up libhttp-message-perl (6.11-1) ... > 2516. Setting up python-gevent-websocket (0.9.3-1) ... > 2517. Setting up php-mcrypt (1:7.0+49) ... > 2518. Setting up libnet-ldap-perl (1:0.6500+dfsg-1) ... > 2519. Setting up libdbd-mysql-perl (4.041-2) ... > 2520. Setting up postfix-policyd-spf-perl (2.010-2) ... > 2521. groupadd: nscd did not terminate normally (signal 11) > 2522. groupadd: nscd did not terminate normally (signal 11) > 2523. groupadd: nscd did not terminate normally (signal 11) > 2524. useradd: nscd did not terminate normally (signal 11) > 2525. useradd: nscd did not terminate normally (signal 11) > 2526. useradd: nscd did not terminate normally (signal 11) > 2527. useradd: nscd did not terminate normally (signal 11) > 2528. usermod: nscd did not terminate normally (signal 11) > 2529. usermod: nscd did not terminate normally (signal 11) > 2530. usermod: nscd did not terminate normally (signal 11) > 2531. usermod: nscd did not terminate normally (signal 11) > 2532. chage: nscd did not terminate normally (signal 11) > 2533. chage: nscd did not terminate normally (signal 11) > 2534. Setting up python-apt (1.1.0~beta5) ... > 2535. Setting up redis-server (3:3.2.6-3+deb9u1) ... > 2536. groupadd: nscd did not terminate normally (signal 11) > 2537. groupadd: nscd did not terminate normally (signal 11) > 2538. groupadd: nscd did not terminate normally (signal 11) > 2539. useradd: nscd did not terminate normally (signal 11) > 2540. useradd: nscd did not terminate normally (signal 11) > 2541. useradd: nscd did not terminate normally (signal 11) > 2542. useradd: nscd did not terminate normally (signal 11) > 2543. usermod: nscd did not terminate normally (signal 11) > 2544. usermod: nscd did not terminate normally (signal 11) > 2545. usermod: nscd did not terminate normally (signal 11) > 2546. usermod: nscd did not terminate normally (signal 11) > 2547. chage: nscd did not terminate normally (signal 11) > 2548. chage: nscd did not terminate normally (signal 11) > 2549. Created symlink /etc/systemd/system/redis.service → /lib/systemd/system/redis-server.service. > 2550. Created symlink /etc/systemd/system/multi-user.target.wants/redis-server.service → /lib/systemd/system/redis-server.service. > 2551. Setting up libkyotocabinet16v5:armhf (1.2.76-4.2+rpi1) ... > 2552. Setting up python3-influxdb (3.0.0-1) ... > 2553. Setting up php-mysql (1:7.0+49) ... > 2554. Setting up libhttp-negotiate-perl (6.00-2) ... > 2555. Setting up python-secretstorage (2.3.1-2) ... > 2556. Setting up dovecot-core (1:2.2.27-3+deb9u2) ... > 2557. groupadd: nscd did not terminate normally (signal 11) > 2558. groupadd: nscd did not terminate normally (signal 11) > 2559. groupadd: nscd did not terminate normally (signal 11) > 2560. useradd: nscd did not terminate normally (signal 11) > 2561. useradd: nscd did not terminate normally (signal 11) > 2562. useradd: nscd did not terminate normally (signal 11) > 2563. useradd: nscd did not terminate normally (signal 11) > 2564. usermod: nscd did not terminate normally (signal 11) > 2565. usermod: nscd did not terminate normally (signal 11) > 2566. usermod: nscd did not terminate normally (signal 11) > 2567. usermod: nscd did not terminate normally (signal 11) > 2568. chage: nscd did not terminate normally (signal 11) > 2569. chage: nscd did not terminate normally (signal 11) > 2570. chfn: nscd did not terminate normally (signal 11) > 2571. chfn: nscd did not terminate normally (signal 11) > 2572. chfn: nscd did not terminate normally (signal 11) > 2573. groupadd: nscd did not terminate normally (signal 11) > 2574. groupadd: nscd did not terminate normally (signal 11) > 2575. groupadd: nscd did not terminate normally (signal 11) > 2576. useradd: nscd did not terminate normally (signal 11) > 2577. useradd: nscd did not terminate normally (signal 11) > 2578. useradd: nscd did not terminate normally (signal 11) > 2579. useradd: nscd did not terminate normally (signal 11) > 2580. usermod: nscd did not terminate normally (signal 11) > 2581. usermod: nscd did not terminate normally (signal 11) > 2582. usermod: nscd did not terminate normally (signal 11) > 2583. usermod: nscd did not terminate normally (signal 11) > 2584. chage: nscd did not terminate normally (signal 11) > 2585. chage: nscd did not terminate normally (signal 11) > 2586. chfn: nscd did not terminate normally (signal 11) > 2587. chfn: nscd did not terminate normally (signal 11) > 2588. chfn: nscd did not terminate normally (signal 11) > 2589. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2590. locale: Cannot set LC_CTYPE to default locale: No such file or directory > 2591. locale: Cannot set LC_MESSAGES to default locale: No such file or directory > 2592. locale: Cannot set LC_ALL to default locale: No such file or directory > 2593. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2594. Use of uninitialized value in subroutine entry at /usr/share/perl5/Debconf/Encoding.pm line 68, line 1. > > 2595. Creating config file /etc/dovecot/dovecot.conf with new version > 2596. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2597. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2598. locale: Cannot set LC_CTYPE to default locale: No such file or directory > 2599. locale: Cannot set LC_MESSAGES to default locale: No such file or directory > 2600. locale: Cannot set LC_ALL to default locale: No such file or directory > 2601. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2602. Use of uninitialized value in subroutine entry at /usr/share/perl5/Debconf/Encoding.pm line 68, line 1. > > 2603. Creating config file /etc/dovecot/dovecot-dict-auth.conf.ext with new version > 2604. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2605. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2606. locale: Cannot set LC_CTYPE to default locale: No such file or directory > 2607. locale: Cannot set LC_MESSAGES to default locale: No such file or directory > 2608. locale: Cannot set LC_ALL to default locale: No such file or directory > 2609. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2610. Use of uninitialized value in subroutine entry at /usr/share/perl5/Debconf/Encoding.pm line 68, line 1. > > 2611. Creating config file /etc/dovecot/dovecot-dict-sql.conf.ext with new version > 2612. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2613. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2614. locale: Cannot set LC_CTYPE to default locale: No such file or directory > 2615. locale: Cannot set LC_MESSAGES to default locale: No such file or directory > 2616. locale: Cannot set LC_ALL to default locale: No such file or directory > 2617. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2618. Use of uninitialized value in subroutine entry at /usr/share/perl5/Debconf/Encoding.pm line 68, line 1. > > 2619. Creating config file /etc/dovecot/dovecot-sql.conf.ext with new version > 2620. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2621. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2622. locale: Cannot set LC_CTYPE to default locale: No such file or directory > 2623. locale: Cannot set LC_MESSAGES to default locale: No such file or directory > 2624. locale: Cannot set LC_ALL to default locale: No such file or directory > 2625. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2626. Use of uninitialized value in subroutine entry at /usr/share/perl5/Debconf/Encoding.pm line 68, line 1. > > 2627. Creating config file /etc/dovecot/conf.d/10-auth.conf with new version > 2628. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2629. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2630. locale: Cannot set LC_CTYPE to default locale: No such file or directory > 2631. locale: Cannot set LC_MESSAGES to default locale: No such file or directory > 2632. locale: Cannot set LC_ALL to default locale: No such file or directory > 2633. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2634. Use of uninitialized value in subroutine entry at /usr/share/perl5/Debconf/Encoding.pm line 68, line 1. > > 2635. Creating config file /etc/dovecot/conf.d/10-director.conf with new version > 2636. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2637. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2638. locale: Cannot set LC_CTYPE to default locale: No such file or directory > 2639. locale: Cannot set LC_MESSAGES to default locale: No such file or directory > 2640. locale: Cannot set LC_ALL to default locale: No such file or directory > 2641. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2642. Use of uninitialized value in subroutine entry at /usr/share/perl5/Debconf/Encoding.pm line 68, line 1. > > 2643. Creating config file /etc/dovecot/conf.d/10-logging.conf with new version > 2644. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2645. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2646. locale: Cannot set LC_CTYPE to default locale: No such file or directory > 2647. locale: Cannot set LC_MESSAGES to default locale: No such file or directory > 2648. locale: Cannot set LC_ALL to default locale: No such file or directory > 2649. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2650. Use of uninitialized value in subroutine entry at /usr/share/perl5/Debconf/Encoding.pm line 68, line 1. > > 2651. Creating config file /etc/dovecot/conf.d/10-mail.conf with new version > 2652. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2653. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2654. locale: Cannot set LC_CTYPE to default locale: No such file or directory > 2655. locale: Cannot set LC_MESSAGES to default locale: No such file or directory > 2656. locale: Cannot set LC_ALL to default locale: No such file or directory > 2657. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2658. Use of uninitialized value in subroutine entry at /usr/share/perl5/Debconf/Encoding.pm line 68, line 1. > > 2659. Creating config file /etc/dovecot/conf.d/10-master.conf with new version > 2660. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2661. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2662. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2663. locale: Cannot set LC_CTYPE to default locale: No such file or directory > 2664. locale: Cannot set LC_MESSAGES to default locale: No such file or directory > 2665. locale: Cannot set LC_ALL to default locale: No such file or directory > 2666. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2667. Use of uninitialized value in subroutine entry at /usr/share/perl5/Debconf/Encoding.pm line 68, line 1. > > 2668. Creating config file /etc/dovecot/conf.d/10-tcpwrapper.conf with new version > 2669. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2670. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2671. locale: Cannot set LC_CTYPE to default locale: No such file or directory > 2672. locale: Cannot set LC_MESSAGES to default locale: No such file or directory > 2673. locale: Cannot set LC_ALL to default locale: No such file or directory > 2674. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2675. Use of uninitialized value in subroutine entry at /usr/share/perl5/Debconf/Encoding.pm line 68, line 1. > > 2676. Creating config file /etc/dovecot/conf.d/15-lda.conf with new version > 2677. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2678. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2679. locale: Cannot set LC_CTYPE to default locale: No such file or directory > 2680. locale: Cannot set LC_MESSAGES to default locale: No such file or directory > 2681. locale: Cannot set LC_ALL to default locale: No such file or directory > 2682. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2683. Use of uninitialized value in subroutine entry at /usr/share/perl5/Debconf/Encoding.pm line 68, line 1. > > 2684. Creating config file /etc/dovecot/conf.d/15-mailboxes.conf with new version > 2685. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2686. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2687. locale: Cannot set LC_CTYPE to default locale: No such file or directory > 2688. locale: Cannot set LC_MESSAGES to default locale: No such file or directory > 2689. locale: Cannot set LC_ALL to default locale: No such file or directory > 2690. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2691. Use of uninitialized value in subroutine entry at /usr/share/perl5/Debconf/Encoding.pm line 68, line 1. > > 2692. Creating config file /etc/dovecot/conf.d/90-acl.conf with new version > 2693. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2694. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2695. locale: Cannot set LC_CTYPE to default locale: No such file or directory > 2696. locale: Cannot set LC_MESSAGES to default locale: No such file or directory > 2697. locale: Cannot set LC_ALL to default locale: No such file or directory > 2698. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2699. Use of uninitialized value in subroutine entry at /usr/share/perl5/Debconf/Encoding.pm line 68, line 1. > > 2700. Creating config file /etc/dovecot/conf.d/90-plugin.conf with new version > 2701. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2702. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2703. locale: Cannot set LC_CTYPE to default locale: No such file or directory > 2704. locale: Cannot set LC_MESSAGES to default locale: No such file or directory > 2705. locale: Cannot set LC_ALL to default locale: No such file or directory > 2706. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2707. Use of uninitialized value in subroutine entry at /usr/share/perl5/Debconf/Encoding.pm line 68, line 1. > > 2708. Creating config file /etc/dovecot/conf.d/90-quota.conf with new version > 2709. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2710. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2711. locale: Cannot set LC_CTYPE to default locale: No such file or directory > 2712. locale: Cannot set LC_MESSAGES to default locale: No such file or directory > 2713. locale: Cannot set LC_ALL to default locale: No such file or directory > 2714. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2715. Use of uninitialized value in subroutine entry at /usr/share/perl5/Debconf/Encoding.pm line 68, line 1. > > 2716. Creating config file /etc/dovecot/conf.d/auth-checkpassword.conf.ext with new version > 2717. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2718. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2719. locale: Cannot set LC_CTYPE to default locale: No such file or directory > 2720. locale: Cannot set LC_MESSAGES to default locale: No such file or directory > 2721. locale: Cannot set LC_ALL to default locale: No such file or directory > 2722. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2723. Use of uninitialized value in subroutine entry at /usr/share/perl5/Debconf/Encoding.pm line 68, line 1. > > 2724. Creating config file /etc/dovecot/conf.d/auth-deny.conf.ext with new version > 2725. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2726. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2727. locale: Cannot set LC_CTYPE to default locale: No such file or directory > 2728. locale: Cannot set LC_MESSAGES to default locale: No such file or directory > 2729. locale: Cannot set LC_ALL to default locale: No such file or directory > 2730. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2731. Use of uninitialized value in subroutine entry at /usr/share/perl5/Debconf/Encoding.pm line 68, line 1. > > 2732. Creating config file /etc/dovecot/conf.d/auth-dict.conf.ext with new version > 2733. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2734. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2735. locale: Cannot set LC_CTYPE to default locale: No such file or directory > 2736. locale: Cannot set LC_MESSAGES to default locale: No such file or directory > 2737. locale: Cannot set LC_ALL to default locale: No such file or directory > 2738. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2739. Use of uninitialized value in subroutine entry at /usr/share/perl5/Debconf/Encoding.pm line 68, line 1. > > 2740. Creating config file /etc/dovecot/conf.d/auth-master.conf.ext with new version > 2741. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2742. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2743. locale: Cannot set LC_CTYPE to default locale: No such file or directory > 2744. locale: Cannot set LC_MESSAGES to default locale: No such file or directory > 2745. locale: Cannot set LC_ALL to default locale: No such file or directory > 2746. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2747. Use of uninitialized value in subroutine entry at /usr/share/perl5/Debconf/Encoding.pm line 68, line 1. > > 2748. Creating config file /etc/dovecot/conf.d/auth-passwdfile.conf.ext with new version > 2749. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2750. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2751. locale: Cannot set LC_CTYPE to default locale: No such file or directory > 2752. locale: Cannot set LC_MESSAGES to default locale: No such file or directory > 2753. locale: Cannot set LC_ALL to default locale: No such file or directory > 2754. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2755. Use of uninitialized value in subroutine entry at /usr/share/perl5/Debconf/Encoding.pm line 68, line 1. > > 2756. Creating config file /etc/dovecot/conf.d/auth-sql.conf.ext with new version > 2757. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2758. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2759. locale: Cannot set LC_CTYPE to default locale: No such file or directory > 2760. locale: Cannot set LC_MESSAGES to default locale: No such file or directory > 2761. locale: Cannot set LC_ALL to default locale: No such file or directory > 2762. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2763. Use of uninitialized value in subroutine entry at /usr/share/perl5/Debconf/Encoding.pm line 68, line 1. > > 2764. Creating config file /etc/dovecot/conf.d/auth-static.conf.ext with new version > 2765. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2766. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2767. locale: Cannot set LC_CTYPE to default locale: No such file or directory > 2768. locale: Cannot set LC_MESSAGES to default locale: No such file or directory > 2769. locale: Cannot set LC_ALL to default locale: No such file or directory > 2770. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2771. Use of uninitialized value in subroutine entry at /usr/share/perl5/Debconf/Encoding.pm line 68, line 1. > > 2772. Creating config file /etc/dovecot/conf.d/auth-system.conf.ext with new version > 2773. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2774. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2775. locale: Cannot set LC_CTYPE to default locale: No such file or directory > 2776. locale: Cannot set LC_MESSAGES to default locale: No such file or directory > 2777. locale: Cannot set LC_ALL to default locale: No such file or directory > 2778. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2779. Use of uninitialized value in subroutine entry at /usr/share/perl5/Debconf/Encoding.pm line 68, line 1. > > 2780. Creating config file /etc/dovecot/conf.d/auth-vpopmail.conf.ext with new version > 2781. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2782. Created symlink /etc/systemd/system/multi-user.target.wants/dovecot.service → /lib/systemd/system/dovecot.service. > 2783. Setting up libmailutils5:armhf (1:3.1.1-1) ... > 2784. Setting up moulinette (3.2.0) ... > 2785. Setting up libfontconfig1:armhf (2.11.0-6.7) ... > 2786. Setting up libdbd-ldap-perl (0.20-1) ... > 2787. Setting up mariadb-client-10.1 (10.1.23-9+deb9u1) ... > 2788. Setting up python3-pil:armhf (4.0.0-4) ... > 2789. Setting up libnet-smtp-ssl-perl (1.04-1) ... > 2790. Setting up libhtml-format-perl (2.12-1) ... > 2791. Setting up dovecot-lmtpd (1:2.2.27-3+deb9u2) ... > 2792. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2793. locale: Cannot set LC_CTYPE to default locale: No such file or directory > 2794. locale: Cannot set LC_MESSAGES to default locale: No such file or directory > 2795. locale: Cannot set LC_ALL to default locale: No such file or directory > 2796. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2797. Use of uninitialized value in subroutine entry at /usr/share/perl5/Debconf/Encoding.pm line 68, line 1. > > 2798. Creating config file /etc/dovecot/conf.d/20-lmtp.conf with new version > 2799. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2800. Setting up python-keyring (10.1-1) ... > 2801. Setting up po-debconf (1.0.20) ... > 2802. Setting up libhttp-cookies-perl (6.01-1) ... > 2803. Setting up python-openssl (16.2.0-1) ... > 2804. Setting up python3-numpy (1:1.12.1-3) ... > 2805. Setting up opendkim-tools (2.11.0~alpha-10+deb9u1) ... > 2806. Setting up dovecot-ldap (1:2.2.27-3+deb9u2) ... > 2807. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2808. locale: Cannot set LC_CTYPE to default locale: No such file or directory > 2809. locale: Cannot set LC_MESSAGES to default locale: No such file or directory > 2810. locale: Cannot set LC_ALL to default locale: No such file or directory > 2811. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2812. Use of uninitialized value in subroutine entry at /usr/share/perl5/Debconf/Encoding.pm line 68, line 1. > > 2813. Creating config file /etc/dovecot/dovecot-ldap.conf.ext with new version > 2814. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2815. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2816. locale: Cannot set LC_CTYPE to default locale: No such file or directory > 2817. locale: Cannot set LC_MESSAGES to default locale: No such file or directory > 2818. locale: Cannot set LC_ALL to default locale: No such file or directory > 2819. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2820. Use of uninitialized value in subroutine entry at /usr/share/perl5/Debconf/Encoding.pm line 68, line 1. > > 2821. Creating config file /etc/dovecot/conf.d/auth-ldap.conf.ext with new version > 2822. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2823. Setting up libgd3:armhf (2.2.4-2+deb9u2) ... > 2824. Setting up php-curl (1:7.0+49) ... > 2825. Setting up libhttp-daemon-perl (6.01-1) ... > 2826. Setting up php7.0-cli (7.0.30-0+deb9u1) ... > 2827. update-alternatives: using /usr/bin/php7.0 to provide /usr/bin/php (php) in auto mode > 2828. update-alternatives: using /usr/bin/phar7.0 to provide /usr/bin/phar (phar) in auto mode > 2829. update-alternatives: using /usr/bin/phar.phar7.0 to provide /usr/bin/phar.phar (phar.phar) in auto mode > 2830. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2831. locale: Cannot set LC_CTYPE to default locale: No such file or directory > 2832. locale: Cannot set LC_MESSAGES to default locale: No such file or directory > 2833. locale: Cannot set LC_ALL to default locale: No such file or directory > 2834. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2835. Use of uninitialized value in subroutine entry at /usr/share/perl5/Debconf/Encoding.pm line 68, line 1. > > 2836. Creating config file /etc/php/7.0/cli/php.ini with new version > 2837. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2838. Setting up mailutils (1:3.1.1-1) ... > 2839. update-alternatives: using /usr/bin/frm.mailutils to provide /usr/bin/frm (frm) in auto mode > 2840. update-alternatives: using /usr/bin/from.mailutils to provide /usr/bin/from (from) in auto mode > 2841. update-alternatives: using /usr/bin/messages.mailutils to provide /usr/bin/messages (messages) in auto mode > 2842. update-alternatives: using /usr/bin/movemail.mailutils to provide /usr/bin/movemail (movemail) in auto mode > 2843. update-alternatives: using /usr/bin/readmsg.mailutils to provide /usr/bin/readmsg (readmsg) in auto mode > 2844. update-alternatives: using /usr/bin/dotlock.mailutils to provide /usr/bin/dotlock (dotlock) in auto mode > 2845. update-alternatives: using /usr/bin/mail.mailutils to provide /usr/bin/mailx (mailx) in auto mode > 2846. Setting up dovecot-sieve (1:2.2.27-3+deb9u2) ... > 2847. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2848. locale: Cannot set LC_CTYPE to default locale: No such file or directory > 2849. locale: Cannot set LC_MESSAGES to default locale: No such file or directory > 2850. locale: Cannot set LC_ALL to default locale: No such file or directory > 2851. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2852. Use of uninitialized value in subroutine entry at /usr/share/perl5/Debconf/Encoding.pm line 68, line 1. > > 2853. Creating config file /etc/dovecot/conf.d/90-sieve.conf with new version > 2854. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2855. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2856. locale: Cannot set LC_CTYPE to default locale: No such file or directory > 2857. locale: Cannot set LC_MESSAGES to default locale: No such file or directory > 2858. locale: Cannot set LC_ALL to default locale: No such file or directory > 2859. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2860. Use of uninitialized value in subroutine entry at /usr/share/perl5/Debconf/Encoding.pm line 68, line 1. > > 2861. Creating config file /etc/dovecot/conf.d/90-sieve-extprograms.conf with new version > 2862. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2863. Setting up php7.0-fpm (7.0.30-0+deb9u1) ... > 2864. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2865. locale: Cannot set LC_CTYPE to default locale: No such file or directory > 2866. locale: Cannot set LC_MESSAGES to default locale: No such file or directory > 2867. locale: Cannot set LC_ALL to default locale: No such file or directory > 2868. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2869. Use of uninitialized value in subroutine entry at /usr/share/perl5/Debconf/Encoding.pm line 68, line 1. > > 2870. Creating config file /etc/php/7.0/fpm/php.ini with new version > 2871. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2872. Created symlink /etc/systemd/system/multi-user.target.wants/php7.0-fpm.service → /lib/systemd/system/php7.0-fpm.service. > 2873. Setting up php-fpm (1:7.0+49) ... > 2874. Setting up dovecot-imapd (1:2.2.27-3+deb9u2) ... > 2875. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2876. locale: Cannot set LC_CTYPE to default locale: No such file or directory > 2877. locale: Cannot set LC_MESSAGES to default locale: No such file or directory > 2878. locale: Cannot set LC_ALL to default locale: No such file or directory > 2879. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2880. Use of uninitialized value in subroutine entry at /usr/share/perl5/Debconf/Encoding.pm line 68, line 1. > > 2881. Creating config file /etc/dovecot/conf.d/20-imap.conf with new version > 2882. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2883. Setting up php-pear (1:1.10.1+submodules+notgz-9) ... > 2884. Setting up libhtml-form-perl (6.03-1) ... > 2885. Setting up libxft2:armhf (2.3.2-1) ... > 2886. Setting up mariadb-server-10.1 (10.1.23-9+deb9u1) ... > 2887. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2888. locale: Cannot set LC_CTYPE to default locale: No such file or directory > 2889. locale: Cannot set LC_MESSAGES to default locale: No such file or directory > 2890. locale: Cannot set LC_ALL to default locale: No such file or directory > 2891. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2892. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2893. Created symlink /etc/systemd/system/mysql.service → /lib/systemd/system/mariadb.service. > 2894. Created symlink /etc/systemd/system/mysqld.service → /lib/systemd/system/mariadb.service. > 2895. Created symlink /etc/systemd/system/multi-user.target.wants/mariadb.service → /lib/systemd/system/mariadb.service. > 2896. Setting up python3-matplotlib (2.0.0+dfsg1-2) ... > 2897. Setting up libmailtools-perl (2.18-1) ... > 2898. Setting up php-php-gettext (1.0.12-0.1) ... > 2899. Setting up libtk8.6:armhf (8.6.6-1) ... > 2900. Setting up libnginx-mod-http-image-filter (1.10.3-1+deb9u1) ... > 2901. Setting up php7.0-gd (7.0.30-0+deb9u1) ... > 2902. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2903. locale: Cannot set LC_CTYPE to default locale: No such file or directory > 2904. locale: Cannot set LC_MESSAGES to default locale: No such file or directory > 2905. locale: Cannot set LC_ALL to default locale: No such file or directory > 2906. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2907. Use of uninitialized value in subroutine entry at /usr/share/perl5/Debconf/Encoding.pm line 68, line 1. > > 2908. Creating config file /etc/php/7.0/mods-available/gd.ini with new version > 2909. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2910. Setting up tk8.6-blt2.5 (2.5.3+dfsg-3) ... > 2911. Setting up mariadb-server (10.1.23-9+deb9u1) ... > 2912. Setting up php-gd (1:7.0+49) ... > 2913. Setting up php-gettext (1.0.12-0.1) ... > 2914. Setting up blt (2.5.3+dfsg-3) ... > 2915. Setting up nginx-extras (1.10.3-1+deb9u1) ... > 2916. Setting up ssowat (3.2.0) ... > 2917. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2918. Setting up python3-tk:armhf (3.5.3-1) ... > 2919. Processing triggers for dovecot-core (1:2.2.27-3+deb9u2) ... > 2920. Setting up dovecot-managesieved (1:2.2.27-3+deb9u2) ... > 2921. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2922. locale: Cannot set LC_CTYPE to default locale: No such file or directory > 2923. locale: Cannot set LC_MESSAGES to default locale: No such file or directory > 2924. locale: Cannot set LC_ALL to default locale: No such file or directory > 2925. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2926. Use of uninitialized value in subroutine entry at /usr/share/perl5/Debconf/Encoding.pm line 68, line 1. > > 2927. Creating config file /etc/dovecot/conf.d/20-managesieve.conf with new version > 2928. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8) > 2929. Setting up dovecot-antispam (2.0+20170109-1) ... > 2930. Processing triggers for dovecot-core (1:2.2.27-3+deb9u2) ... > 2931. Setting up dh-autoreconf (14) ... > 2932. Setting up liblwp-protocol-https-perl (6.06-2) ... > 2933. Setting up dh-strip-nondeterminism (0.034-1) ... > 2934. Setting up libwww-perl (6.15-1) ... > 2935. Setting up debhelper (10.2.5) ... > 2936. Setting up equivs (2.0.9+nmu1) ... > 2937. Processing triggers for libc-bin (2.24-11+deb9u3) ... > 2938. Processing triggers for systemd (232-25+deb9u4) ... > 2939. Processing triggers for rsyslog (8.24.0-1) ... > 2940. Processing triggers for php7.0-fpm (7.0.30-0+deb9u1) ... > 2941. Errors were encountered while processing: > 2942. metronome > 2943. yunohost > 2944. yunohost-admin > 2945. W: --force-yes is deprecated, use one of the options starting with --allow instead. > 2946. E: Sub-process /usr/bin/dpkg returned an error code (1) > 2947. [e[1me[31mFAILe[0m] Installation of Yunohost packages failed > 2948. [e[1me[34mINFOe[0m] Installation logs are available in /var/log/yunohost-installation_20181020_105238.log > > ``` bon, ça fait un long post pour un premier 🙂 merci d’avance ---
### Author: ![jean](https://forum.yunohost.org/letter_avatar_proxy/v4/letter/j/fbc32d/32.png) [@jean](https://forum.yunohost.org/u/jean) #### Post date: [October 20, 2018, 4:36pm UTC](https://forum.yunohost.org/t/raspberry-1-b-grave-problemes-dinstallation/6026/2 "2018-10-20T16:36:38Z")
Je précise que ce n’est pas un problème hardware à priori. j’ai utilisé plusieurs cartes SD et plusieurs Raspberry pi avec le même résultat ---
### Author: ![LaBaude](https://forum.yunohost.org/letter_avatar_proxy/v4/letter/l/8e8cbc/32.png) [@LaBaude](https://forum.yunohost.org/u/LaBaude) #### Post date: [October 20, 2018, 5:09pm UTC](https://forum.yunohost.org/t/raspberry-1-b-grave-problemes-dinstallation/6026/3 "2018-10-20T17:09:08Z")
Salut Jean et bienvenu ! Visiblement t’as effectivement un problème de locales pour commencer. As-tu paramétré tes locales dans `raspi-config` avant de mettre Yuno lors de ton installation propre de Raspian ? Si ce n’est pas le cas il faut que tu le fasses et met tout en `en_US.UTF-8`, ça simplifie les problèmes en général. (Une fois que tout sera réglé tu pourras mettre aussi la locale FR) ---
### Author: ![jean](https://forum.yunohost.org/letter_avatar_proxy/v4/letter/j/fbc32d/32.png) [@jean](https://forum.yunohost.org/u/jean) #### Post date: [October 20, 2018, 5:48pm UTC](https://forum.yunohost.org/t/raspberry-1-b-grave-problemes-dinstallation/6026/4 "2018-10-20T17:48:59Z")
Bonsoir @LaBaude J’ai effectivement changer les locales dans raspi-config avant l’installation. mais à mon avis, il faut chercher le problème ailleurs vu que l’image fourni par l’équipe avec Yunohost pré-installé renvoie déjà les mêmes erreurs et que dans le cas d’une installation manuelle elles n’apparaissent qu’après que le script veut les forcer. peut-être voir avec ça ? > ## Problèmes avec Locale > > Si vous vivez aux États-Unis et voyez le message d’erreur [_Cannot set LC\_ALL to default locale: No such file or directory_], vous n’êtes pas le premier. Vous pouvez provoquer l’erreur en faisant **Set Locale** via SSH, puis en tapant la commande _locale_ . Curieusement, l’erreur n’est visible que lorsque vous exécutez **Set Locale** dans _raspi-config_ , puis que remarquez que la localisation est toujours sur en\_GB. Si vous recherchez des répertoires nommés _locales_ > > # find / -type d -name locales > > /usr/share/i18n/locales > /usr/share/doc/locales > /usr/share/bug/locales > > # > > lisez _/usr/share/doc/locales/README.Debian_ vous découvrirez que Debian vise que “Chaque _locale_ définie par l’utilisateur doit être fournie en un seul fichier et placée dans le répertoire _/usr/local/share/i18n/locales/_ . La liste des _locales_ utilisateurs définies doit être placée, une par ligne, dans le fichier _/usr/local/share/i18n/SUPPORTED_ . > > Quelque part entre Debian et Raspbian quelqu’un a décidé de les déplacer vers _/usr/share/i18n/_ . Peut-être qu’ils ne pouvaient pas épeler _locale_ et ont juste décidé de les laisser de côté, mais ils n’ont modifié aucun des processus qui recherchent l’emplacement d’origine ce qui explique le message _No such file or directory_ . Bizarre que ma vieille copie de Debian fonctionne très bien, mais la structure de répertoire est le même que dans Raspbian et il n’y a pas de liens symboliques. Dans tous les cas, faire des liens symboliques résout le problème pour l’utilisateur _root_ . Le problème existe toujours pour l’utilisateur _pi_ , et l’erreur peut également être générée par l’exécution de _sudo locale_ > > # mkdir -p /usr/local/share/i18n > > # ln -s /usr/share/i18n/locales /usr/local/share/i18n/locales > > # ln -s /usr/share/i18n/SUPPORTED /usr/local/share/i18n/SUPPORTED > > # > > Vérifiez que l’exécution de la commande _locales_ en root ne génère plus d’erreur. > Redémarrez et vérifiez que l’exécution de la commande comme _pi_ , _sudo_ , ou _root_ ne génère plus d’erreur. trouvé [ici](https://www.framboise314.fr/raspbian-tout-un-tas-de-trucs/) il semble que raspbian soit différent dans la gestion des locales que debian. cela dit, le vrai problème, c’est que le script de yunohost échoue à l’installation et ce n’est pas vraiment sûr que ça vienne de là… ---
### Author: ![yolateng0](https://forum.yunohost.org/user_avatar/forum.yunohost.org/yolateng0/32/163_2.png) [@yolateng0](https://forum.yunohost.org/u/yolateng0) #### Post date: [October 20, 2018, 6:35pm UTC](https://forum.yunohost.org/t/raspberry-1-b-grave-problemes-dinstallation/6026/5 "2018-10-20T18:35:35Z")
Tu as mis le doigt sur une problématique présente depuis la release 3.1 de yunohost sur RaspberryPi . j ai ce souci sur une raspi B+ (visiblement sur certains vps et dédié aussi). dans mon cas je n ai pas de log à partir de Metronome et peu sur nginx etc… Il me semble que cela s oriente sur Moulinette ou LDAP à mon sens. ---
### Author: ![frju365](https://forum.yunohost.org/user_avatar/forum.yunohost.org/frju365/32/7108_2.png) [@frju365](https://forum.yunohost.org/u/frju365) #### Post date: [October 20, 2018, 7:42pm UTC](https://forum.yunohost.org/t/raspberry-1-b-grave-problemes-dinstallation/6026/6 "2018-10-20T19:42:37Z")
Bonjour et bienvenue ! Peux-tu tenter `sudo apt install locales-all && sudo dpkg --configure -a` ? Je précise que cette méthode à résolu mon problème. ---
### Author: ![jean](https://forum.yunohost.org/letter_avatar_proxy/v4/letter/j/fbc32d/32.png) [@jean](https://forum.yunohost.org/u/jean) #### Post date: [October 21, 2018, 7:05am UTC](https://forum.yunohost.org/t/raspberry-1-b-grave-problemes-dinstallation/6026/7 "2018-10-21T07:05:33Z")
bonjour @yolateng0 le souci dont tu parles c’est les locales ou le fait de ne pas pouvoir installer yunohost? parce que bon, les locales c’est gênant mais moins que de ne pas pouvoir utiliser le serveur 😅 en tout cas merci pour ta réponse. ---
### Author: ![jean](https://forum.yunohost.org/letter_avatar_proxy/v4/letter/j/fbc32d/32.png) [@jean](https://forum.yunohost.org/u/jean) #### Post date: [October 21, 2018, 7:10am UTC](https://forum.yunohost.org/t/raspberry-1-b-grave-problemes-dinstallation/6026/8 "2018-10-21T07:10:09Z")
bonjour @frju365 quand tu parles de problème résolu, c’est pour les locales seulement ou pour l’installation de yunohost? Je rappelle que là, je n’ai pas réussi à l’installer pour l’instant… ---
### Author: ![ppr](https://forum.yunohost.org/letter_avatar_proxy/v4/letter/p/8c91f0/32.png) [@ppr](https://forum.yunohost.org/u/ppr) #### Post date: [October 21, 2018, 7:52am UTC](https://forum.yunohost.org/t/raspberry-1-b-grave-problemes-dinstallation/6026/9 "2018-10-21T07:52:22Z")
Bonjour @jean , J’avais écrit quelques lignes ici [https://avignu.wiki.tuxfamily.org/doku.php?id=documentation:yunohost-stretch-v3.x.x.x-rpi](https://avignu.wiki.tuxfamily.org/doku.php?id=documentation:yunohost-stretch-v3.x.x.x-rpi) pour installer YunoHost sur Raspberry Pi sur une base Raspbian 9 Stretch. Il faut savoir que sur une Raspberry Pi 1B, une fois les installations de Raspbian puis de YunoHost terminées, et avant de passer à la post-installation, il faut laisser ta framboise se reposer quelques minutes afin de lui laisser le temps de tout bien démarrer l’ensemble des services. D’expérience, si on enchaîne directement avec la post-installation, du fait des petites ressources de la carte, il se peut qu’il y ait des commandes non prises en compte, particulièrement lors de la définition du nom de domaine et du mot de passe administrateur. Si tu as déjà essayé de réaliser une installation qui n’a pas abouti avec un nom de domaine fourni pas YunoHost (`*.ynh.fr` ; `*.nohost.me` ; `*.noho.st`), alors il te faudra sans doute repasser par ici [Nohost domain recovery - Suppression de domaine en nohost.me, noho.st et ynh.fr](https://forum.yunohost.org/t/nohost-domain-recovery-suppression-de-domaine-en-nohost-me-noho-st-et-ynh-fr/442) préalablement à une nouvelle post-installation. ppr ---
### Author: ![jean](https://forum.yunohost.org/letter_avatar_proxy/v4/letter/j/fbc32d/32.png) [@jean](https://forum.yunohost.org/u/jean) #### Post date: [October 21, 2018, 10:52am UTC](https://forum.yunohost.org/t/raspberry-1-b-grave-problemes-dinstallation/6026/10 "2018-10-21T10:52:51Z")
merci beaucoup @ppr et de répondre un dimanche qui plus est je me suis effectivement servi d’un autre de tes tutos pour l’installation (celui de jessie, malheureusement…) je vais reprendre l’installation point par point et je te tiendrai au courant mais ça me rassure que quelqu’un ait réussi. d’autre part, si l’un d’entre vous peut essayer, lui aussi, l’image préinstallée de yunohost fournie par l’équipe… elle ne semble pas fonctionnelle et c’est important de faire remonter l’info. mais si je suis tout seul… ---
### Author: ![LaBaude](https://forum.yunohost.org/letter_avatar_proxy/v4/letter/l/8e8cbc/32.png) [@LaBaude](https://forum.yunohost.org/u/LaBaude) #### Post date: [October 21, 2018, 8:57pm UTC](https://forum.yunohost.org/t/raspberry-1-b-grave-problemes-dinstallation/6026/11 "2018-10-21T20:57:29Z")
Re @jean, J’ai un Rpi 3B+ (nettement plus puissant que le 1B je crois) et l’image préinstallé de Yuno fonctionne même si justement y’a des problèmes de locales. Perso je les ai installés plusieurs fois, les 3.0.0 et 3.1.0. Chacune ayant leurs petits soucis, la 3.0 n’étendait pas la partition entre autre. Et la 3.1 à ces problèmes de locales. Mais enfin globalement ça fonctionne. Bon courage en tout cas ! ---
### Author: ![banquise](https://forum.yunohost.org/user_avatar/forum.yunohost.org/banquise/32/12895_2.png) [@banquise](https://forum.yunohost.org/u/banquise) #### Post date: [October 24, 2018, 9:07am UTC](https://forum.yunohost.org/t/raspberry-1-b-grave-problemes-dinstallation/6026/12 "2018-10-24T09:07:23Z")
Bonjour Jean, Je te rassure, tu n’es pas seul ! J’ai migré sur stretch exactement en même temps que toi et J’ai eu exactement le même problème que toi sur un raspberry pi zero. =\> Problème avec metronome, qui est une dépendance de yunohost et yunohost-admin L’erreur du service metronome était une “Illegal Instruction”. Étant donné que ça ne se produit pas sur raspberry pi 2/3, peut-être est-ce dû à une différence d’architecture armv6/armv7 ? C’est ce que j’ai supposé et j’ai pu poursuivre la migration après avoir compilé moi-même metronome et l’avoir marqué en “hold” (sudo apt-mark hold metronome). Cependant, après la fin de la migration, certains services semblaient ne pas fonctionner / être mal configurés (malgré des regen-conf). J’ai alors fini par craquer et repartir d’une raspbian stretch lite vierge, appliquer les scripts d’install (toujours en recompilant moi-même metronome et en le marquant “on hold”), réinstaller les apps, puis restaurer mes utilisateurs grâce à un backup. Depuis ça fonctionne sans problème ! 🙂 (À part rspamd que je n’ai de toute façon jamais réussi à faire marcher sur pi-zero… 😛 ) ---
### Author: ![yolateng0](https://forum.yunohost.org/user_avatar/forum.yunohost.org/yolateng0/32/163_2.png) [@yolateng0](https://forum.yunohost.org/u/yolateng0) #### Post date: [October 30, 2018, 10:08am UTC](https://forum.yunohost.org/t/raspberry-1-b-grave-problemes-dinstallation/6026/13 "2018-10-30T10:08:11Z")
salut, Le problème est présent également sur RaspberryPi B+ pour ma part. J’ai testé aussi les démarches de regen-conf, hold non-hold… Ta démarche semble la bonne…malheureusement en réinstalle complète…; ---
### Author: ![An0u](https://forum.yunohost.org/user_avatar/forum.yunohost.org/an0u/32/2194_2.png) [@An0u](https://forum.yunohost.org/u/An0u) #### Post date: [June 18, 2019, 9:23am UTC](https://forum.yunohost.org/t/raspberry-1-b-grave-problemes-dinstallation/6026/15 "2019-06-18T09:23:10Z")
Salut, Tu peux expliquer comment t’as compilé metronome toi-même? J’ai le même problème avec mon installation de YunoHost sur mon RaspberryPi B , et j’ai pas réussi à le faire fair marcher. ---
### Author: ![ppr](https://forum.yunohost.org/letter_avatar_proxy/v4/letter/p/8c91f0/32.png) [@ppr](https://forum.yunohost.org/u/ppr) #### Post date: [June 18, 2019, 8:08pm UTC](https://forum.yunohost.org/t/raspberry-1-b-grave-problemes-dinstallation/6026/16 "2019-06-18T20:08:12Z")
Bonsoir, Si ton Raspberry Pi est un modèle 1B, alors ça peut être un peu léger comme configuration pour faire tourner plusieurs applications, je pense entre autres à NextCloud. N’hésite pas si tu as de la place à augmenter un peu le swap dans ce cas là ([While installing Roundcube](https://forum.yunohost.org/t/while-installing-roundcube/7472/12)). Sinon, c’est un peu “vieux” et certainement plus à jour car normalement `metronome` devrait maintenant s’installer correctement, mais tu peux essayer quelque chose du genre sans aucune garantie : **Avant tout, il faut faire une sauvegarde de tout ce qui est possible : configurations, fichiers, exports de l’agenda, des contacts, etc, etc, etc.** [https://avignu.wiki.tuxfamily.org/doku.php?id=documentation:raspberrypi:yunohost-jessie-v2.7.x-rpi#installer\_metronome\_manuellement](https://avignu.wiki.tuxfamily.org/doku.php?id=documentation:raspberrypi:yunohost-jessie-v2.7.x-rpi#installer_metronome_manuellement) ppr ---
### Author: ![koolok](https://forum.yunohost.org/letter_avatar_proxy/v4/letter/k/c57346/32.png) [@koolok](https://forum.yunohost.org/u/koolok) #### Post date: [July 5, 2019, 9:12pm UTC](https://forum.yunohost.org/t/raspberry-1-b-grave-problemes-dinstallation/6026/17 "2019-07-05T21:12:14Z")
Bonjour, je me permet de revenir à la charge. Je suis aussi sur rapberry 1B+. J’ai utiliser l’image proposer par l’équipe et j’ai le même problème avec Metronome (j’ai remplacé l’url de mon instance par xxx): > Setting up metronome (3.11.8+yunohost-2) … > Job for metronome.service failed because the control process exited with error code. > See “systemctl status metronome.service” and “journalctl -xe” for details. > invoke-rc.d: initscript metronome, action “start” failed. > ● metronome.service - LSB: Metronome XMPP Server > Loaded: loaded (/etc/init.d/metronome; generated; vendor preset: enabled) > Active: failed (Result: exit-code) since Fri 2019-07-05 21:58:44 BST; 211ms ago > Docs: man:systemd-sysv-generator(8) > Process: 23879 ExecStart=/etc/init.d/metronome start (code=exited, status=1/FAILURE) > > Jul 05 21:58:44 xxx systemd[1]: Starting LSB: Metronome XMPP Server… > Jul 05 21:58:44 xxx metronome[23879]: Starting Metronome XMPP Server: metronomeIl…tion > Jul 05 21:58:44 xxx metronome[23879]: failed! > Jul 05 21:58:44 xxx systemd[1]: metronome.service: Control process exited, code=…tus=1 > Jul 05 21:58:44 xxx systemd[1]: Failed to start LSB: Metronome XMPP Server. > Jul 05 21:58:44 xxx systemd[1]: metronome.service: Unit entered failed state. > Jul 05 21:58:44 xxx systemd[1]: metronome.service: Failed with result ‘exit-code’. > Hint: Some lines were ellipsized, use -l to show in full. > dpkg: error processing package metronome (–configure): > subprocess installed post-installation script returned error exit status 1 > Errors were encountered while processing: > metronome > E: Sub-process /usr/bin/dpkg returned an error code (1) J’ai bien essayer de faire un “apt-get dist-upgrade” ([comme indiqué ici](https://forum.yunohost.org/t/yunohost-3-4-testing-call-for-feedback/6537/27)) sans succes. J’ai aussi essayé de le compilé mais …: > root@raspberrypi:~/metronome# dpkg-buildpackage -rfakeroot -uc -b -d > dpkg-buildpackage: warning: using a gain-root-command while being root > dpkg-buildpackage: info: source package metronome > dpkg-buildpackage: info: source version 3.11.8 > dpkg-buildpackage: info: source distribution stable > dpkg-buildpackage: info: source changed by Alexandre Aubin [alex.aubin@mailoo.org](mailto:alex.aubin@mailoo.org) > dpkg-buildpackage: info: host architecture armhf > dpkg-source --before-build metronome > dpkg-source: info: applying do-not-make-localhost-cert.patch > fakeroot debian/rules clean > dh --with quilt clean > dh: Compatibility levels before 9 are deprecated (level 7 in use) > dh: unable to load addon quilt: Can’t locate Debian/Debhelper/Sequence/quilt.pm in @INC (you may need to install the Debian::Debhelper::Sequence::quilt module) (@INC contains: /etc/perl /usr/local/lib/arm-linux-gnueabihf/perl/5.24.1 /usr/local/share/perl/5.24.1 /usr/lib/arm-linux-gnueabihf/perl5/5.24 /usr/share/perl5 /usr/lib/arm-linux-gnueabihf/perl/5.24 /usr/share/perl/5.24 /usr/local/lib/site\_perl /usr/lib/arm-linux-gnueabihf/perl-base) at (eval 4) line 2. > BEGIN failed–compilation aborted at (eval 4) line 2. > > debian/rules:7: recipe for target ‘clean’ failed > make: \*\*\* [clean] Error 2 > dpkg-buildpackage: error: fakeroot debian/rules clean gave error exit status 2 ---
### Author: ![yolateng0](https://forum.yunohost.org/user_avatar/forum.yunohost.org/yolateng0/32/163_2.png) [@yolateng0](https://forum.yunohost.org/u/yolateng0) #### Post date: [July 6, 2019, 7:52pm UTC](https://forum.yunohost.org/t/raspberry-1-b-grave-problemes-dinstallation/6026/18 "2019-07-06T19:52:56Z")
salut quels soucis présents depuis quelque temps sur l’image prposée pour les raspberrypi de première génération > [@Erreur installation metronome, yunohost, yunohost-admin](https://forum.yunohost.org/t/erreur-installation-metronome-yunohost-yunohost-admin/7435/4): > > Bonsoir, J’ai collé le log d’erreur dans le paste de yunohost, ici : [https://paste.yunohost.org/akiranikax.erl](https://paste.yunohost.org/akiranikax.erl) Je me lance en parallèle dans l’installation “from scratch” en suivant le tuto indiqué … Merci ! ---
### Author: ![ppr](https://forum.yunohost.org/letter_avatar_proxy/v4/letter/p/8c91f0/32.png) [@ppr](https://forum.yunohost.org/u/ppr) #### Post date: [July 7, 2019, 5:05am UTC](https://forum.yunohost.org/t/raspberry-1-b-grave-problemes-dinstallation/6026/19 "2019-07-07T05:05:18Z")
Bonjour, Comme j’ai une Raspberry 1B, je vais voir pour adapter ce tuto dès que j’aurai un peu de temps : [https://avignu.wiki.tuxfamily.org/doku.php?id=documentation:raspberrypi:yunohost-jessie-v2.7.x-rpi](https://avignu.wiki.tuxfamily.org/doku.php?id=documentation:raspberrypi:yunohost-jessie-v2.7.x-rpi) **Il est possible d’essayer de l’adapter** avec cette adresse pour avoir la dernière Raspbian Stretch Lite : [https://downloads.raspberrypi.org/raspbian\_lite/archive/2019-06-24-07:07/](https://downloads.raspberrypi.org/raspbian_lite/archive/2019-06-24-07:07/) Ainsi de vérifier non pas que `jessie` remplace bien `stable`, mais que `stretch` remplace bien ` stable` afin de ne pas passer en ` buster` dans le sources-list. Enfin, d’envoyer cette commande pour installer YunoHost : > curl [https://install.yunohost.org](https://install.yunohost.org) | bash ppr ---
### Author: ![ppr](https://forum.yunohost.org/letter_avatar_proxy/v4/letter/p/8c91f0/32.png) [@ppr](https://forum.yunohost.org/u/ppr) #### Post date: [July 21, 2019, 1:29pm UTC](https://forum.yunohost.org/t/raspberry-1-b-grave-problemes-dinstallation/6026/20 "2019-07-21T13:29:36Z")
Bonjour @jean et @koolok , J’ai essayé de mettre à jour rapidement un tuto pour réaliser une installation à la main YunoHost “from scratch” depuis un Raspberry Pi sur une base Raspbian Stretch [https://avignu.wiki.tuxfamily.org/doku.php?id=documentation:raspberrypi:yunohost-stretch-v3.x-rpi\_de\_zero](https://avignu.wiki.tuxfamily.org/doku.php?id=documentation:raspberrypi:yunohost-stretch-v3.x-rpi_de_zero) C’est tout frais et non relu mais les grandes lignes sont là. Attention tout de même car les Raspberry Pi avec de faibles ressources, comme les 1 ou 1B, mettent un petit quart d’heure suite à l’installation de YunoHost pour démarrer tous les services comme il faut. C’est donc bien d’attendre 10 à 15 minutes avant d’envoyer la post-installation. ppr ---
### Author: ![banquise](https://forum.yunohost.org/user_avatar/forum.yunohost.org/banquise/32/12895_2.png) [@banquise](https://forum.yunohost.org/u/banquise) #### Post date: [September 9, 2019, 8:04pm UTC](https://forum.yunohost.org/t/raspberry-1-b-grave-problemes-dinstallation/6026/21 "2019-09-09T20:04:44Z")
Salut, Désolé pour le contre-temps, je viens de voir ce message. Pour compiler metronome moi-même, j’ai simplement suivi cette procédure : [https://metronome.im/building](https://metronome.im/building) Une fois installé, je l’ai mis “on hold” ce qui a permis de finir le post-install. Depuis, je le recompile régulièrement afin de suivre la version que YunoHost embarque. [Next page](https://forum.yunohost.org/t/raspberry-1-b-grave-problemes-dinstallation/6026.md?page=2)