Bonjour,
La mise à jour de Nexcloud est bloquée : https://paste.yunohost.org/raw/bagozezido
:~# inxi -Fazy
System:
Kernel: 5.10.0-14-amd64 x86_64 bits: 64 compiler: gcc v: 10.2.1
parameters: root=/dev/vda rw console=tty0 net.ifnames=0 biosdevname=0
Console: tty 0 Distro: Debian GNU/Linux 11 (bullseye)
Machine:
Type: Kvm System: QEMU product: Standard PC (i440FX + PIIX, 1996)
v: pc-i440fx-5.2 serial: N/A Chassis: type: 1 v: pc-i440fx-5.2 serial: N/A
Mobo: N/A model: N/A serial: N/A BIOS: SeaBIOS v: 1.14.0-2 date: 04/01/2014
CPU:
Info: Single Core model: QEMU Virtual version 2.5+ bits: 64 type: UP
arch: K7 Palomino+ family: 6 model-id: 6 stepping: 3 microcode: 1000065
L2 cache: 512 KiB
flags: lm nx pae sse sse2 sse3 bogomips: 5290
Speed: 2645 MHz min/max: N/A base/boost: 2000/2000 Core speed (MHz): 1: 2645
Vulnerabilities: Type: itlb_multihit status: Not affected
Type: l1tf status: Not affected
Type: mds status: Not affected
Type: meltdown status: Not affected
Type: spec_store_bypass status: Vulnerable
Type: spectre_v1
mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: Retpolines, STIBP: disabled, RSB filling
Type: srbds status: Not affected
Type: tsx_async_abort status: Not affected
Graphics:
Device-1: Cirrus Logic GD 5446 vendor: Red Hat QEMU Virtual Machine
driver: cirrus v: kernel alternate: cirrusfb bus ID: 00:02.0
chip ID: 1013:00b8 class ID: 0300
Display: server: No display server data found. Headless machine? tty: 80x24
Message: Advanced graphics data unavailable in console for root.
Audio:
Message: No Device data found.
Network:
Device-1: Intel 82371AB/EB/MB PIIX4 ACPI
vendor: Red Hat Qemu virtual machine type: network bridge
driver: piix4_smbus v: N/A modules: i2c_piix4 port: c0c0 bus ID: 00:01.3
chip ID: 8086:7113 class ID: 0680
Device-2: Red Hat Virtio network driver: virtio-pci v: 1 modules: virtio_pci
port: c0e0 bus ID: 00:03.0 chip ID: 1af4:1000 class ID: 0200
IF: eth0 state: up speed: -1 duplex: unknown mac: <filter>
Drives:
Local Storage: total: 25 GiB used: 9.09 GiB (36.4%)
SMART Message: Required tool smartctl not installed. Check --recommends
ID-1: /dev/vda maj-min: 254:0 model: N/A size: 25 GiB block size:
physical: 512 B logical: 512 B speed: <unknown> serial: N/A
Partition:
ID-1: / raw size: 25 GiB size: 24.99 GiB (99.95%) used: 9.09 GiB (36.4%)
fs: xfs block size: 512 B dev: /dev/vda maj-min: 254:0
Swap:
Kernel: swappiness: 5 (default 60) cache pressure: 50 (default 100)
ID-1: swap-1 type: file size: 1024 MiB used: 61 MiB (6.0%) priority: -2
file: /swapfile
Sensors:
Message: No sensors data was found. Is sensors configured?
Info:
Processes: 108 Uptime: 1h 06m wakeups: 6 Memory: 976.4 MiB
used: 676.1 MiB (69.3%) Init: systemd v: 247 runlevel: 5 Compilers:
gcc: 10.2.1 alt: 10 Packages: apt: 913 lib: 474 Shell: Bash v: 5.1.4
running in: tty 0 (SSH) inxi: 3.3.01
Une bonne âme a-t-elle une idée de quoi faire ?
J’ai bien passé :
# apt install php8.0-igbinary
# apt install php8.0-redis
Mais ça n’a rien changé