# Internet Cube asks me to perform post install \[Solution: Wait\]
**URL:** https://forum.yunohost.org/t/internet-cube-asks-me-to-perform-post-install-solution-wait/7832
**Category:** Support
**Tags:** english
**Created:** [April 29, 2019, 11:10am UTC](https://forum.yunohost.org/t/internet-cube-asks-me-to-perform-post-install-solution-wait/7832 "2019-04-29T11:10:48Z")
**Posts on this page:** 11
**Page:** 1
### Author:  [@anne](https://forum.yunohost.org/u/anne)
#### Post date: [April 29, 2019, 11:10am UTC](https://forum.yunohost.org/t/internet-cube-asks-me-to-perform-post-install-solution-wait/7832/1 "2019-04-29T11:10:48Z")
Hello!
I am trying to install an internet cube (on a Lime2, with a .cube file for the VPN) following the steps provided at [http://install.labriqueinter.net](http://install.labriqueinter.net)
Flashing the image goes well, as well as board startup. Still, when I connect to the web interface, it launches a yunohost update and then the postinstall phase: I have been told that this means that the additional elements of the internet cube have failed to install.
I tries a couple of times, same result.
How should I proceed to install an internet cube:
1. Try again the same steps, or some other (I have been told that tools are somewhat unstable at the moment)?
2. Should I go for yunohost and then add the right additional software to have a fully-fledged internet cube? What should I then install for this?
Thanks!
---
### Author:  [@Aleks](https://forum.yunohost.org/u/Aleks)
#### Post date: [April 29, 2019, 11:48am UTC](https://forum.yunohost.org/t/internet-cube-asks-me-to-perform-post-install-solution-wait/7832/2 "2019-04-29T11:48:49Z")
Hi there,
so from [install.labriqueinter.net](http://install.labriqueinter.net), you should have obtained an hypercube file.
You need to provide this hypercube file to the setup either by :
- using the appropriate argument in the install-sd.sh script when flashing the SD card (the script is available from here [https://repo.internetcu.be/](https://repo.internetcu.be/) (or similar page in french))
- or plugging an USB key containing the file before your first boot the board
After that, you should find the local IP of your board (e.g. with arp-scan) and go to [http://192.168.x.y:2468/install.html](http://192.168.x.y:2468/install.html) to find the installation debug page to follow the install process
Or another trick is to use this small page that uses black magic to do all this from your browser : [https://repo.internetcu.be/tools/](https://repo.internetcu.be/tools/)
The hypercube procedure is explained at the bottom of [https://repo.internetcu.be/](https://repo.internetcu.be/). Note that you should _not_ perform the yunohost postinstall yourself. It is done by the hypercube install process among other things
Hope it helps !
---
### Author:  [@pitchum](https://forum.yunohost.org/u/pitchum)
#### Post date: [April 30, 2019, 2:25pm UTC](https://forum.yunohost.org/t/internet-cube-asks-me-to-perform-post-install-solution-wait/7832/3 "2019-04-30T14:25:20Z")
I heard that there’s an issue with the latest image available.
I just tried by myself here and I encountered the following errors during the first Debian upgrade.
```auto
Setting up yunohost-admin (3.5.2) ...
unable to write 'random state'
dpkg: error processing package yunohost-admin (--configure):
subprocess installed post-installation script returned error exit status 1
Processing triggers for initramfs-tools (0.130) ...
update-initramfs: Generating /boot/initrd.img-4.14.84-sunxi
update-initramfs: Converting to u-boot format
Errors were encountered while processing:
yunohost-admin
W: --force-yes is deprecated, use one of the options starting with --allow instead.
E: Sub-process /usr/bin/dpkg returned an error code (1)
```
Please try the latest unofficial image named [internetcube-stretch-3.4.2-lime2-stable.img.tar.xz](https://repo.labriqueinter.net/images/internetcube-stretch-3.4.2-lime2-stable.img.tar.xz). Download that file and when flashing the SD card you’ll have to use option “-f”, like this:
```
bash install-sd.sh -2y install.hypercube -f internetcube-stretch-3.4.2-lime2-stable.img.tar.xz
```
---
### Author:  [@pitchum](https://forum.yunohost.org/u/pitchum)
#### Post date: [May 4, 2019, 6:48am UTC](https://forum.yunohost.org/t/internet-cube-asks-me-to-perform-post-install-solution-wait/7832/4 "2019-05-04T06:48:48Z")
@anne a new image has been uploaded yesterday, can you try again?
---
### Author:  [@anne](https://forum.yunohost.org/u/anne)
#### Post date: [May 10, 2019, 10:28pm UTC](https://forum.yunohost.org/t/internet-cube-asks-me-to-perform-post-install-solution-wait/7832/5 "2019-05-10T22:28:44Z")
Thanks @pitchum!
Still, after installing, connecting the lime to power and ethernet, on the web page I am prompted to start the postinstall. Seems like the issue is not resolved?
_Edit_
I didn’t notice at first that the new image was unofficial. Since the link you provided do not work, I tried with [https://repo.labriqueinter.net/internetcube-stretch-latest-lime2.img.tar.xz](https://repo.labriqueinter.net/internetcube-stretch-latest-lime2.img.tar.xz) and I still have the issue.
---
### Author:  [@Aleks](https://forum.yunohost.org/u/Aleks)
#### Post date: [May 11, 2019, 2:42pm UTC](https://forum.yunohost.org/t/internet-cube-asks-me-to-perform-post-install-solution-wait/7832/6 "2019-05-11T14:42:08Z")
> [@Aleks](#):
>
> After that, you should find the local IP of your board (e.g. with arp-scan) and go to [http://192.168.x.y:2468/install.html](http://192.168.x.y:2468/install.html) to find the installation debug page to follow the install process
Did you do that …?
---
### Author:  [@pitchum](https://forum.yunohost.org/u/pitchum)
#### Post date: [May 11, 2019, 7:01pm UTC](https://forum.yunohost.org/t/internet-cube-asks-me-to-perform-post-install-solution-wait/7832/7 "2019-05-11T19:01:49Z")
@anne, same question as @Aleks: did you open [http://192.168.x.y:2468/install.html](http://192.168.x.y:2468/install.html) after booting the cube for the first time?
It’s a web page showing the progress of the cube installation.
This is a very important step that lasts approximately 30 minutes and that must not be interrupted.
I guess it’s too late to view this page but if you can access your cube via SSH you may be able to read log files located in _/var/log/hypercube/_.
---
### Author:  [@anne](https://forum.yunohost.org/u/anne)
#### Post date: [May 14, 2019, 10:45pm UTC](https://forum.yunohost.org/t/internet-cube-asks-me-to-perform-post-install-solution-wait/7832/8 "2019-05-14T22:45:19Z")
Forgot that, so I did it again and install process went right (apart from the known roundcube issue), clearly I wasn’t waiting enough and forgot to check the install webpage. So it seems that my issue wasn’t related to tools instability. Sorry and thank you so much!
---
### Author:  [@pitchum](https://forum.yunohost.org/u/pitchum)
#### Post date: [May 16, 2019, 6:53am UTC](https://forum.yunohost.org/t/internet-cube-asks-me-to-perform-post-install-solution-wait/7832/9 "2019-05-16T06:53:48Z")
The roundcube issue will be fixed in 2 days now: [roundcube\_ynh PR-64](https://github.com/YunoHost-Apps/roundcube_ynh/pull/60)
---
### Author:  [@Aleks](https://forum.yunohost.org/u/Aleks)
#### Post date: [May 16, 2019, 1:31pm UTC](https://forum.yunohost.org/t/internet-cube-asks-me-to-perform-post-install-solution-wait/7832/10 "2019-05-16T13:31:15Z")
> [@pitchum](#):
>
> in 2 days now
(At least in testing 😅)
---
### Author:  [@Aleks](https://forum.yunohost.org/u/Aleks)
#### Post date: [January 18, 2023, 8:24pm UTC](https://forum.yunohost.org/t/internet-cube-asks-me-to-perform-post-install-solution-wait/7832/11 "2023-01-18T20:24:06Z")