de pire en ire, je mets en deux fois les résultats
root@amphibie:/tmp/install_script# ./install_yunohostv2
Failure !
The following error was caught during YunoHost installation :
Installation of Yunohost packages failed
Installation logs are located in /var/log/yunohost-installation.log
root@amphibie:/tmp/install_script#
root@amphibie:/tmp/install_script#
root@amphibie:/tmp/install_script# cd /tmp/install_script
root@amphibie:/tmp/install_script#
root@amphibie:/tmp/install_script#
root@amphibie:/tmp/install_script# yunohost tools postinstall
Domaine principal : chezlagrenouille.nohost.me
Nouveau mot de passe d’administration :
Confirmez le nouveau mot de passe d’administration :
Installation de YunoHost…
Erreur : Sous-domaine DynDNS indisponible
root@amphibie:/tmp/install_script#
root@amphibie:~# yunohost tools postinstall
Domaine principal : chezlagrenouille.nohost.me
Nouveau mot de passe d’administration :
Confirmez le nouveau mot de passe d’administration :
Installation de YunoHost…
Erreur : Sous-domaine DynDNS indisponible
/////////erreurs////////////
cat /var/log/yunohost-installation.log
full name instead.
160504 9:53:06 [Note] /usr/sbin/mysqld (mysqld 5.5.49-0+deb8u1) starting as process 16574 …
Paramétrage de ntp (1:4.2.6.p5+dfsg-7+deb8u1) …
update-rc.d: warning: start and stop actions are no longer supported; falling back to defaults
Paramétrage de libperl5.20 (5.20.2-3+deb8u4) …
Paramétrage de libslp1:amd64 (1.2.1-10+deb8u1) …
Paramétrage de slapd (2.4.40+dfsg-1+deb8u2) …
Creating new user openldap… done.
Creating initial configuration… done.
Creating LDAP directory… done.
Paramétrage de nslcd (0.9.4-3+deb8u1) …
hostname: Name or service not known
hostname: Name or service not known
Attention ! Impossible d’accéder au répertoire personnel que vous avez indiqué (/var/run/nslcd/) : Aucun fichier ou dossier de ce type.
Ajout de l’utilisateur système « nslcd » (UID 121) …
Ajout du nouveau groupe « nslcd » (GID 129) …
Ajout du nouvel utilisateur « nslcd » (UID 121) avec pour groupe d’appartenance « nslcd » …
Le répertoire personnel « /var/run/nslcd/ » n’a pas été créé.
Paramétrage de libnss-ldapd:amd64 (0.9.4-3+deb8u1) …
/etc/nsswitch.conf: enable LDAP lookups for group
/etc/nsswitch.conf: enable LDAP lookups for passwd
/etc/nsswitch.conf: enable LDAP lookups for shadow
Paramétrage de libpam-ldapd:amd64 (0.9.4-3+deb8u1) …
Paramétrage de htop (1.0.3-1) …
Paramétrage de vim-runtime (2:7.4.488-7) …
Processing /usr/share/vim/addons/doc
Paramétrage de vim (2:7.4.488-7) …
update-alternatives: utilisation de « /usr/bin/vim.basic » pour fournir « /usr/bin/vim » (vim) en mode automatique
update-alternatives: utilisation de « /usr/bin/vim.basic » pour fournir « /usr/bin/vimdiff » (vimdiff) en mode automatique
update-alternatives: utilisation de « /usr/bin/vim.basic » pour fournir « /usr/bin/rvim » (rvim) en mode automatique
update-alternatives: utilisation de « /usr/bin/vim.basic » pour fournir « /usr/bin/rview » (rview) en mode automatique
update-alternatives: utilisation de « /usr/bin/vim.basic » pour fournir « /usr/bin/vi » (vi) en mode automatique
update-alternatives: utilisation de « /usr/bin/vim.basic » pour fournir « /usr/bin/view » (view) en mode automatique
update-alternatives: utilisation de « /usr/bin/vim.basic » pour fournir « /usr/bin/ex » (ex) en mode automatique
Paramétrage de unrar (1:5.2.7-0.1) …
update-alternatives: utilisation de « /usr/bin/unrar-nonfree » pour fournir « /usr/bin/unrar » (unrar) en mode automatique
Paramétrage de zoo (2.10-27+b1) …
Paramétrage de arj (3.10.22-13) …
Paramétrage de libiconv-hook1 (0.0.20021209-10) …
Paramétrage de fail2ban (0.8.13-1) …
Paramétrage de gettext (0.19.3-2) …
Paramétrage de curl (7.38.0-4+deb8u3) …
Paramétrage de dnsmasq (2.72-3+deb8u1) …
Paramétrage de postfix-ldap (2.11.3-1) …
Adding ldap map entry to /etc/postfix/dynamicmaps.cf
Paramétrage de libnetaddr-ip-perl (4.075+dfsg-1+b1) …
Paramétrage de libdigest-hmac-perl (1.03+dfsg-1) …
Paramétrage de libsocket6-perl (0.25-1+b1) …
Paramétrage de libio-socket-inet6-perl (2.72-1) …
Paramétrage de libnet-ip-perl (1.26-1) …
Paramétrage de libnet-dns-perl (0.81-2) …
Paramétrage de libmail-spf-perl (2.9.0-3) …
Paramétrage de libsys-hostname-long-perl (1.4-3) …
Paramétrage de postfix-policyd-spf-perl (2.010-1) …
Paramétrage de postfix-pcre (2.11.3-1) …
Adding pcre map entry to /etc/postfix/dynamicmaps.cf
Paramétrage de libconvert-asn1-perl (0.27-1) …
Paramétrage de libnet-ldap-perl (1:0.6400+dfsg-2) …
Paramétrage de libdbd-ldap-perl (0.20-1) …
Paramétrage de ldap-utils (2.4.40+dfsg-1+deb8u2) …
Paramétrage de sudo-ldap (1.8.10p3-1+deb8u3) …
Paramétrage de yunohost-config-slapd (2.2.0) …
hostname: Name or service not known
config file testing succeeded
Paramétrage de unattended-upgrades (0.83.3.2+deb8u1) …
update-rc.d: warning: start and stop actions are no longer supported; falling back to defaults
Paramétrage de udisks (1.0.5-1+b1) …
Paramétrage de udisks-glue (1.3.5-1) …
Paramétrage de yunohost-config-others (2.2.0) …
hostname: Name or service not known
Generating a 2048 bit RSA private key
…+++
…+++
writing new private key to ‘/usr/share/yunohost/yunohost-config/ssl/yunoCA/ca/cakey.pem’
Generating a 2048 bit RSA private key
…+++
…+++
writing new private key to ‘/usr/share/yunohost/yunohost-config/ssl/yunoCA/certs/yunohost_key.pem’
Using configuration from /usr/share/yunohost/yunohost-config/ssl/yunoCA/openssl.cnf
Check that the request matches the signature
Signature ok
Certificate Details:
Serial Number: 1 (0x1)
Validity
Not Before: May 4 07:53:53 2016 GMT
Not After : May 4 07:53:53 2018 GMT
Subject:
commonName = yunohost.org
X509v3 extensions:
X509v3 Basic Constraints:
CA:FALSE
Netscape Comment:
OpenSSL Generated Certificate
X509v3 Subject Key Identifier:
C0:4D:54:6A:D1:BC:62:AB:97:72:87:28:AF:77:47:CD:D3:13:12:50
X509v3 Authority Key Identifier:
keyid:60:2A:69:60:79:14:99:5F:91:34:8D:D0:BE:5E:CC:15:67:72:67:E2
X509v3 Key Usage:
Digital Signature, Non Repudiation, Key Encipherment
X509v3 Subject Alternative Name:
DNS:yunohost.org, DNS:www.yunohost.org, DNS:ns.yunohost.org
Certificate is to be certified until May 4 07:53:53 2018 GMT (730 days)
Write out database with 1 new entries
Data Base Updated
Updating certificates in /etc/ssl/certs… 0 added, 0 removed; done.
Running hooks in /etc/ca-certificates/update.d…
done.
done.
update-rc.d: error: initscript does not exist: /etc/init.d/yunohost-firewall
Use of uninitialized value in join or string at /usr/sbin/pam-auth-update line 109, line 4.
net.ipv6.conf.all.forwarding = 1
eth0 Link encap:Ethernet HWaddr 00:19:99:35:6c:17
Failed to restart yunohost-firewall.service: Unit yunohost-firewall.service failed to load: No such file or directory.
Paramétrage de libarchive-zip-perl (1.39-1) …
Paramétrage de libberkeleydb-perl (0.54-2+b1) …
Paramétrage de libio-stringy-perl (2.110-5) …
Paramétrage de libconvert-binhex-perl (1.123-2) …
Paramétrage de libmime-tools-perl (5.505-1) …
Paramétrage de libconvert-tnef-perl (0.18-1) …
Paramétrage de libconvert-uulib-perl (1:1.4~dfsg-1+b3) …
Paramétrage de libcrypt-openssl-bignum-perl (0.04-4+b2) …
Paramétrage de libcrypt-openssl-rsa-perl (0.28-2+b1) …
Paramétrage de libmail-dkim-perl (0.40-1) …
Paramétrage de libnet-libidn-perl (0.12.ds-2+b1) …
Paramétrage de libio-multiplex-perl (1.13-1) …
Paramétrage de libnet-cidr-perl (0.17-1) …
Paramétrage de libnet-server-perl (2.008-1) …
Paramétrage de libunix-syslog-perl (1.1-2+b4) …
Paramétrage de pax (1:20140703-2) …
Paramétrage de amavisd-new (1:2.10.1-2~deb8u1) …
Creating/updating amavis user account…
Job for amavis.service failed. See ‘systemctl status amavis.service’ and ‘journalctl -xn’ for details.
invoke-rc.d: initscript amavis, action “start” failed.
dpkg: erreur de traitement du paquet amavisd-new (–configure) :
le sous-processus script post-installation installé a retourné une erreur de sortie d’état 1
Paramétrage de spamassassin (3.4.0-6) …
Ajout de l’utilisateur système « debian-spamd » (UID 124) …
Ajout du nouveau groupe « debian-spamd » (GID 132) …
Ajout du nouvel utilisateur « debian-spamd » (UID 124) avec pour groupe d’appartenance « debian-spamd » …
Création du répertoire personnel « /var/lib/spamassassin »…
Paramétrage de razor (1:2.85-4.1+b1) …
Paramétrage de python-gdbm (2.7.8-2+b1) …
Paramétrage de pyzor (1:0.5.0-2) …
dpkg: des problèmes de dépendances empêchent la configuration de yunohost-config-amavis :
yunohost-config-amavis dépend de amavisd-new ; cependant :
Le paquet amavisd-new n’est pas encore configuré.
dpkg: erreur de traitement du paquet yunohost-config-amavis (–configure) :
problèmes de dépendances - laissé non configuré
Paramétrage de postgrey (1.35-1) …
Attention ! Impossible d’accéder au répertoire personnel que vous avez indiqué (/var/lib/postgrey) : Aucun fichier ou dossier de ce type.
Ajout de l’utilisateur système « postgrey » (UID 125) …
Ajout du nouveau groupe « postgrey » (GID 133) …
Ajout du nouvel utilisateur « postgrey » (UID 125) avec pour groupe d’appartenance « postgrey » …
Le répertoire personnel « /var/lib/postgrey » n’a pas été créé.
Creating config file /etc/postgrey/whitelist_clients with new version
Creating config file /etc/postgrey/whitelist_recipients with new version
Creating config file /etc/default/postgrey with new version
dpkg: des problèmes de dépendances empêchent la configuration de yunohost-config-postfix :
yunohost-config-postfix dépend de yunohost-config-amavis ; cependant :
Le paquet yunohost-config-amavis n’est pas encore configuré.
dpkg: erreur de traitement du paquet yunohost-config-postfix (–configure) :
problèmes de dépendances - laissé non configuré
Paramétrage de dovecot-core (1:2.2.13-12~deb8u1) …
Creating config file /etc/dovecot/dovecot.conf with new version
Creating config file /etc/dovecot/dovecot-dict-auth.conf.ext with new version
Creating config file /etc/dovecot/dovecot-dict-sql.conf.ext with new version
Creating config file /etc/dovecot/dovecot-sql.conf.ext with new version
Creating config file /etc/dovecot/conf.d/10-auth.conf with new version
Creating config file /etc/dovecot/conf.d/10-director.conf with new version
Creating config file /etc/dovecot/conf.d/10-logging.conf with new version
Creating config file /etc/dovecot/conf.d/10-mail.conf with new version
Creating config file /etc/dovecot/conf.d/10-master.conf with new version
Creating config file /etc/dovecot/conf.d/10-ssl.conf with new version
Creating config file /etc/dovecot/conf.d/10-tcpwrapper.conf with new version
Creating config file /etc/dovecot/conf.d/15-lda.conf with new version
Creating config file /etc/dovecot/conf.d/15-mailboxes.conf with new version
Creating config file /etc/dovecot/conf.d/90-acl.conf with new version
Creating config file /etc/dovecot/conf.d/90-plugin.conf with new version
Creating config file /etc/dovecot/conf.d/90-quota.conf with new version
Creating config file /etc/dovecot/conf.d/auth-checkpassword.conf.ext with new version
Creating config file /etc/dovecot/conf.d/auth-deny.conf.ext with new version
Creating config file /etc/dovecot/conf.d/auth-dict.conf.ext with new version
Creating config file /etc/dovecot/conf.d/auth-master.conf.ext with new version
Creating config file /etc/dovecot/conf.d/auth-passwdfile.conf.ext with new version
Creating config file /etc/dovecot/conf.d/auth-sql.conf.ext with new version
Creating config file /etc/dovecot/conf.d/auth-static.conf.ext with new version
Creating config file /etc/dovecot/conf.d/auth-system.conf.ext with new version
Creating config file /etc/dovecot/conf.d/auth-vpopmail.conf.ext with new version
Paramétrage de dovecot-imapd (1:2.2.13-12~deb8u1) …
Creating config file /etc/dovecot/conf.d/20-imap.conf with new version
Paramétrage de dovecot-sieve (1:2.2.13-12~deb8u1) …
Creating config file /etc/dovecot/conf.d/90-sieve.conf with new version
Creating config file /etc/dovecot/conf.d/90-sieve-extprograms.conf with new version
Paramétrage de dovecot-ldap (1:2.2.13-12~deb8u1) …
Creating config file /etc/dovecot/dovecot-ldap.conf.ext with new version
Creating config file /etc/dovecot/conf.d/auth-ldap.conf.ext with new version
Paramétrage de dovecot-lmtpd (1:2.2.13-12~deb8u1) …
Creating config file /etc/dovecot/conf.d/20-lmtp.conf with new version
dpkg: des problèmes de dépendances empêchent la configuration de yunohost-config-dovecot :
yunohost-config-dovecot dépend de yunohost-config-amavis ; cependant :
Le paquet yunohost-config-amavis n’est pas encore configuré.
dpkg: erreur de traitement du paquet yunohost-config-dovecot (–configure) :
problèmes de dépendances - laissé non configuré
Paramétrage de lua5.1 (5.1.5-7.1) …
update-alternatives: utilisation de « /usr/bin/lua5.1 » pour fournir « /usr/bin/lua » (lua-interpreter) en mode automatique
update-alternatives: utilisation de « /usr/bin/luac5.1 » pour fournir « /usr/bin/luac » (lua-compiler) en mode automatique
Paramétrage de metronome (3.6-6) …
Ajout de l’utilisateur metronome au groupe ssl-cert
Paramétrage de yunohost-config-metronome (2.2.0) …
Paramétrage de mysql-server (5.5.49-0+deb8u1) …
Paramétrage de yunohost-config-mysql (2.2.0) …
hostname: Name or service not known
hostname: Name or service not known
[ ok ] Reloading mysql configuration (via systemctl): mysql.service.
Paramétrage de libapparmor1:amd64 (2.9.0-3) …
Paramétrage de libqdbm14 (1.8.78-5+b1) …
Paramétrage de php5-common (5.6.20+dfsg-0+deb8u1) …
Creating config file /etc/php5/mods-available/pdo.ini with new version
php5_invoke: Enable module pdo for cli SAPI
php5_invoke: Enable module pdo for fpm SAPI
Creating config file /etc/php5/mods-available/opcache.ini with new version
php5_invoke: Enable module opcache for cli SAPI
php5_invoke: Enable module opcache for fpm SAPI
Paramétrage de php5-json (1.3.6-1) …
php5_invoke: Enable module json for cli SAPI
php5_invoke: Enable module json for fpm SAPI
Paramétrage de php5-cli (5.6.20+dfsg-0+deb8u1) …
update-alternatives: utilisation de « /usr/bin/php5 » pour fournir « /usr/bin/php » (php) en mode automatique
update-alternatives: utilisation de « /usr/bin/phar5 » pour fournir « /usr/bin/phar » (phar) en mode automatique
Creating config file /etc/php5/cli/php.ini with new version
Paramétrage de php5-fpm (5.6.20+dfsg-0+deb8u1) …
Creating config file /etc/php5/fpm/php.ini with new version
Paramétrage de php5-ldap (5.6.20+dfsg-0+deb8u1) …
Creating config file /etc/php5/mods-available/ldap.ini with new version
php5_invoke: Enable module ldap for cli SAPI
php5_invoke: Enable module ldap for fpm SAPI
Paramétrage de php5-mysql (5.6.20+dfsg-0+deb8u1) …
Creating config file /etc/php5/mods-available/mysql.ini with new version
php5_invoke: Enable module mysql for cli SAPI
php5_invoke: Enable module mysql for fpm SAPI
Creating config file /etc/php5/mods-available/mysqli.ini with new version
php5_invoke: Enable module mysqli for cli SAPI
php5_invoke: Enable module mysqli for fpm SAPI
Creating config file /etc/php5/mods-available/pdo_mysql.ini with new version
php5_invoke: Enable module pdo_mysql for cli SAPI
php5_invoke: Enable module pdo_mysql for fpm SAPI
Paramétrage de php5-gd (5.6.20+dfsg-0+deb8u1) …
Creating config file /etc/php5/mods-available/gd.ini with new version
php5_invoke: Enable module gd for cli SAPI
php5_invoke: Enable module gd for fpm SAPI
Paramétrage de php5-curl (5.6.20+dfsg-0+deb8u1) …
Creating config file /etc/php5/mods-available/curl.ini with new version
php5_invoke: Enable module curl for cli SAPI
php5_invoke: Enable module curl for fpm SAPI
Paramétrage de libmcrypt4 (2.5.8-3.3) …
Paramétrage de php5-mcrypt (5.6.20+dfsg-0+deb8u1) …
Creating config file /etc/php5/mods-available/mcrypt.ini with new version
php5_invoke: Enable module mcrypt for cli SAPI
php5_invoke: Enable module mcrypt for fpm SAPI
Paramétrage de php5-intl (5.6.20+dfsg-0+deb8u1) …
Creating config file /etc/php5/mods-available/intl.ini with new version
php5_invoke: Enable module intl for cli SAPI
php5_invoke: Enable module intl for fpm SAPI
Paramétrage de php-gettext (1.0.11-1) …
Paramétrage de nginx-common (1.6.2-5+deb8u1) …
Paramétrage de nginx-extras (1.6.2-5+deb8u1) …
Paramétrage de yunohost-config-nginx (2.2.0) …
Paramétrage de lua-json (1.3.2-1) …
Paramétrage de ssowat (2.2.3) …
Paramétrage de python-ldap (2.4.10-1) …
Paramétrage de python-yaml (3.11-2) …
Paramétrage de python-bottle (0.12.7-1) …
Paramétrage de python-gnupg (0.3.6-1) …
Paramétrage de python-greenlet (0.4.2-2) …
Paramétrage de python-gevent (1.0.1-2) …
Paramétrage de python-gevent-websocket (0.9.3-1.1) …
Paramétrage de moulinette (2.2.1.1) …
Paramétrage de python-psutil (2.1.1-1+b1) …
Paramétrage de python-urllib3 (1.9.1-3) …
Paramétrage de python-requests (2.4.3-6) …
Paramétrage de python3-psutil (2.1.1-1+b1) …
Paramétrage de glances (2.1.1-1) …
Fichier de configuration « /etc/default/glances »
==> Fichier du système créé par vous ou par un script.
==> Fichier également présent dans le paquet fourni par le responsable du paquet.
==> Utilisation de l’ancien fichier en place comme demandé.
Creating system user ‘glances’.
Paramétrage de python-colorama (0.3.2-1) …
Paramétrage de python-distlib (0.1.9-1) …
Paramétrage de python-html5lib (0.999-3) …
Paramétrage de python-setuptools (5.5.1-1) …
Paramétrage de python-pip (1.5.6-5) …
Paramétrage de python2.7-dev (2.7.9-2) …
Paramétrage de binutils (2.25-5) …
Paramétrage de libgcc-4.9-dev:amd64 (4.9.2-10) …
Paramétrage de gcc-4.9 (4.9.2-10) …
Paramétrage de gcc (4:4.9.2-2) …
Paramétrage de libstdc+±4.9-dev:amd64 (4.9.2-10) …
Paramétrage de g+±4.9 (4.9.2-10) …
Paramétrage de g++ (4:4.9.2-2) …
update-alternatives: utilisation de « /usr/bin/g++ » pour fournir « /usr/bin/c++ » (c++) en mode automatique
Paramétrage de make (4.0-8.1) …
Paramétrage de libdpkg-perl (1.17.26) …
Paramétrage de dpkg-dev (1.17.26) …
Paramétrage de build-essential (11.7) …
Paramétrage de pyminiupnpc (0.1~megusta7) …
/bin/sh updateminiupnpcstrings.sh
Detected OS [Debian] version [8.4]
MiniUPnPc version [1.8]
setting OS_STRING macro value to Debian/8.4 in miniupnpcstrings.h.
setting MINIUPNPC_VERSION_STRING macro value to 1.8 in miniupnpcstrings.h.
cc -fPIC -O -Wall -W -Wstrict-prototypes -fno-common -DMINIUPNPC_SET_SOCKET_TIMEOUT -DMINIUPNPC_GET_SRC_ADDR -D_BSD_SOURCE -D_POSIX_C_SOURCE=1 -ansi -c -o miniwget.o miniwget.c
cc -fPIC -O -Wall -W -Wstrict-prototypes -fno-common -DMINIUPNPC_SET_SOCKET_TIMEOUT -DMINIUPNPC_GET_SRC_ADDR -D_BSD_SOURCE -D_POSIX_C_SOURCE=1 -ansi -c -o minixml.o minixml.c
cc -fPIC -O -Wall -W -Wstrict-prototypes -fno-common -DMINIUPNPC_SET_SOCKET_TIMEOUT -DMINIUPNPC_GET_SRC_ADDR -D_BSD_SOURCE -D_POSIX_C_SOURCE=1 -ansi -c -o igd_desc_parse.o igd_desc_parse.c
cc -fPIC -O -Wall -W -Wstrict-prototypes -fno-common -DMINIUPNPC_SET_SOCKET_TIMEOUT -DMINIUPNPC_GET_SRC_ADDR -D_BSD_SOURCE -D_POSIX_C_SOURCE=1 -ansi -c -o minisoap.o minisoap.c
cc -fPIC -O -Wall -W -Wstrict-prototypes -fno-common -DMINIUPNPC_SET_SOCKET_TIMEOUT -DMINIUPNPC_GET_SRC_ADDR -D_BSD_SOURCE -D_POSIX_C_SOURCE=1 -ansi -c -o miniupnpc.o miniupnpc.c
cc -fPIC -O -Wall -W -Wstrict-prototypes -fno-common -DMINIUPNPC_SET_SOCKET_TIMEOUT -DMINIUPNPC_GET_SRC_ADDR -D_BSD_SOURCE -D_POSIX_C_SOURCE=1 -ansi -c -o upnpreplyparse.o upnpreplyparse.c
cc -fPIC -O -Wall -W -Wstrict-prototypes -fno-common -DMINIUPNPC_SET_SOCKET_TIMEOUT -DMINIUPNPC_GET_SRC_ADDR -D_BSD_SOURCE -D_POSIX_C_SOURCE=1 -ansi -c -o upnpcommands.o upnpcommands.c
cc -fPIC -O -Wall -W -Wstrict-prototypes -fno-common -DMINIUPNPC_SET_SOCKET_TIMEOUT -DMINIUPNPC_GET_SRC_ADDR -D_BSD_SOURCE -D_POSIX_C_SOURCE=1 -ansi -c -o upnperrors.o upnperrors.c
cc -fPIC -O -Wall -W -Wstrict-prototypes -fno-common -DMINIUPNPC_SET_SOCKET_TIMEOUT -DMINIUPNPC_GET_SRC_ADDR -D_BSD_SOURCE -D_POSIX_C_SOURCE=1 -ansi -c -o connecthostport.o connecthostport.c
cc -fPIC -O -Wall -W -Wstrict-prototypes -fno-common -DMINIUPNPC_SET_SOCKET_TIMEOUT -DMINIUPNPC_GET_SRC_ADDR -D_BSD_SOURCE -D_POSIX_C_SOURCE=1 -ansi -c -o portlistingparse.o portlistingparse.c
cc -fPIC -O -Wall -W -Wstrict-prototypes -fno-common -DMINIUPNPC_SET_SOCKET_TIMEOUT -DMINIUPNPC_GET_SRC_ADDR -D_BSD_SOURCE -D_POSIX_C_SOURCE=1 -ansi -c -o receivedata.o receivedata.c
cc -fPIC -O -Wall -W -Wstrict-prototypes -fno-common -DMINIUPNPC_SET_SOCKET_TIMEOUT -DMINIUPNPC_GET_SRC_ADDR -D_BSD_SOURCE -D_POSIX_C_SOURCE=1 -ansi -c -o minissdpc.o minissdpc.c
ar crs libminiupnpc.a miniwget.o minixml.o igd_desc_parse.o minisoap.o miniupnpc.o upnpreplyparse.o upnpcommands.o upnperrors.o connecthostport.o portlistingparse.o receivedata.o minissdpc.o
python setup.py build
running build
running build_ext
building ‘miniupnpc’ extension
creating build
creating build/temp.linux-x86_64-2.7
x86_64-linux-gnu-gcc -pthread -fno-strict-aliasing -D_FORTIFY_SOURCE=2 -g -fstack-protector-strong -Wformat -Werror=format-security -fPIC -I/usr/include/python2.7 -c miniupnpcmodule.c -o build/temp.linux-x86_64-2.7/miniupnpcmodule.o
creating build/lib.linux-x86_64-2.7
x86_64-linux-gnu-gcc -pthread -shared -Wl,-O1 -Wl,-Bsymbolic-functions -Wl,-z,relro -fno-strict-aliasing -DNDEBUG -g -fwrapv -O2 -Wall -Wstrict-prototypes -D_FORTIFY_SOURCE=2 -g -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,relro -D_FORTIFY_SOURCE=2 -g -fstack-protector-strong -Wformat -Werror=format-security build/temp.linux-x86_64-2.7/miniupnpcmodule.o libminiupnpc.a -o build/lib.linux-x86_64-2.7/miniupnpc.so
touch pythonmodule
python setup.py install
running install
running build
running build_ext
running install_lib
copying build/lib.linux-x86_64-2.7/miniupnpc.so -> /usr/local/lib/python2.7/dist-packages
running install_egg_info
Writing /usr/local/lib/python2.7/dist-packages/miniupnpc-1.7.egg-info
Paramétrage de bind9utils (1:9.9.5.dfsg-9+deb8u6) …
Paramétrage de python-dnspython (1.12.0-1) …